Glory hole spillway | CFD simulation
SIMPAL GROUP

The glory hole spillway is a type of spillway used in dams or reservoirs to release excess water. It consists of a vertical, cylindrical or funnel-shaped structure with a large circular opening at the top. When water levels rise above the desired capacity, it flows over the dam and enters the glory hole spillway, which then channels the water downward and away from the dam. The name "glory hole" comes from the visual effect created when water plunges into the hole, often creating a spectacular display.

In this project, I used the VOF model to simulate the air-water flow inside it and estimated the massflow at the outlet.

contact for more info
📥 t.moghimi@ simpalgroup.com

#cfd #hydrolic

--------------------
Contact us:
🆔 telegram
🎞️ instagram

CFD simulation of a cooling tower using wind-breaker
by Tohid Moghimi
SIMPAL GROUP
---------------------------

🔻One of the most important issues of #cooling towers is the #blocking of outlet air at the top of the tower and decreasing the performance in high-speed upstream wind flows.

🔻In this project, I used an aerodynamic concept that shows the #separation of flow around the cylinder starts between 120 to 130 degrees.

🔻Based on this idea and using #CFD simulation, I designed a wind_breaker wall with some intake for this cooling tower which assumed the intakes are open after 120 degree. This helps the inside air to escape from the back side and the performance of the cooling tower increases!

-------------------------------------
Feel free to contact me :
📩 wa.me/989354699585

CFD simulation Course| Particle tracking of #cyclone
Software: Ansys Fluent/CFX
by Tohid Moghimi
SIMPAL GROUP

🥇What you learn in this course:
🚩A general view of multiphase flows with a focus on the Lagrangian method
🚩Introduction to different forces on particles
🚩Introduction to different types of cyclone and governing equations
🚩3D modeling of a cyclone in #Space_claim
🚩Grid meshing in #Ansys_meshing with considering the quality of mesh factors
🚩Setup particle tracing simulation in both #Ansys_CFX and #Fluent
🚩Postprocessing in #CFD post and creating Animation

👨‍💻Language of the course: Fa & En

🔗For more info and registration:
wa.me/989354699585
simpalgroup.com

I am creating a #free course of #CFD simulation of savonius #wind_turbine.



The first part has been released and you can see how to create the 3D model in space claim.

watch here: https://youtu.be/kVMO2Sl07TI?si=jDWG3GEH00H2rmt9



The next part will be about meshing the domain. So follow SIMPAL GROUP YouTube channel to don't miss this course.



Your support give me more energy ☺️❤️



CFD by Tohid Moghimi

wa.me/989354699585

OpenFOAM basic course
دوره شبیه سازی با نرم افزار اوپن فوم

content:
https://lnkd.in/eNCRFbrT

More info and registration:
wa.me/989354699585

Follow us:
zil.ink/simpalgroup

hashtag#openfoam hashtag#cfd

#CFD simulation course of #solidification is available now on SIMPAL GROUP YouTube channel

Part1: Spacelcaim
https://lnkd.in/eB3g5eQG

Part2: Ansys meshing
https://lnkd.in/e_TX3AVh

Part3: Ansys Fluent
https://lnkd.in/eBBv8R96

Part4: CFD post
https://lnkd.in/eeQc8_2g

Please support our channel and feel free to ask your questions ♥️

zil.ink/simpalgroup

--------------------------------------------------
🆔 @simpal_ir
🌐 simpalgroup.com

Gas turbine simulation course

by Tohid Moghimi

Ansys trainer of SIMPAL GROUP

-----------------------------------

In this course you will learn:



🚩How to design the blade of a gas turbine and the computational domain

using #bladegen & #Design_modeler



🚩How to create a structural mesh in #Turbo_grid



🚩How to define the setup in #Ansys_CFX



🚩How to export CFD results in #CFD_post



🚩 How to simulate #thermal and #structural Analysis using #FSI method

--------------------------------------

🔗more info and registration

wa.me/98935469958

zil.ink/simpalgroup

Simulation of mixing two fluids with different density using #mps method.

This methos is meshles and faster than #CFD

Density of the red fluid is 2000 kg/m^3
Density of the blue fluid is 1000 kg/m^3

Design and Simulation services:
zil.ink/simpalgroup

--------------------------------------------------
🆔 @simpal_ir
🌐 simpalgroup.com

A #dust suspension tool is a device used to control and reduce the amount of dust particles in the air during various #industrial processes such as drilling, grinding, or cutting. It typically works by capturing the dust at the source before it becomes airborne, helping to maintain a cleaner and safer work environment.

SIMPAL GROUP

#CFD simulation by Tohid Moghimi
DPM model using breakup option
Using full cone spray nozzle.


Feel free to contact:
wa.me/989354699585

Horizontal tube falling film evaporators are widely used in the refrigeration and chemical industry. Three-dimensional numerical model with different tube shapes is established in this project to simulate heat and mass transfer process with CFD method, and the heat transfer coefficient of simulation is also validated by experimental data

CFD modeling by Tohid Moghimi
SIMPAL GROUP

Feel free to contact:
wa.me/989354699585

#CFD #Ansys #heattransfer

MPS mixer simulation
SIMPAL GROUP


In contrast with conventional #cfd  methods that require #meshes, the MPS method models fluids directly using particles to represent the fluid. This allows for easily modeling the free surfaces of fluids and for modeling multiple fluid types together, along with the boundaries between these fluids.

-------------------------------------------------------
Density of base fluid: 700 [kg/m^3]
Density of injected fluid: 1000 [kg/m^3]
Rotational velocity: 20 [RPM]

----------------------------
by Tohid Moghimi


--------------------
Contact us:
🆔 @simpal_ir
🔗zil.ink/simpalgroup

Register Now🎉

Centrifugal Pump Course

Design | CFTurbo
Simulation | Ansys

--------------------------------------------
🌀 دوره طراحی و شبیه سازی پمپ

📌بخش اول: طراحی
⁦👩‍💻⁩ مدرس: دکتر شاداب
⁦🖥️⁩ نرم افزار: CFTurbo
💥سر فصل ها:
🔻مقدمات (مبانی توربو ماشین)
🔻 طراحی پروانه
🔻طراحی ولوت

📌بخش دوم: شبیه سازی
⁦👨🏻‍💻⁩مدرس: مهندس مقیمی
⁦🖥️⁩ نرم افزار: Ansys workbench
💥سرفصل ها:
🔻شبکه بندی
🔻 تحلیل سیال
🔻تحلیل سازه
🔻 تقابل سازه-سیال
🔻بررسی پدیده سایش
🔻 بررسی پدیده کاویتاسیون

⁦⚠️⁩ قابلیت دانلود محتوی + پشتیبانی در گروه

مشاهده بخش هایی از دوره


----------------------------------------------
more info and registration:

📞 wa.me/+989354699585

🌐 zil.ink/simpalgroup
--------------------------------------------

#مکانیک #انسیس #انسیس_فلوئنت  #شبیه_سازی‌ #پمپ #سیالات #پایپینگ #هیدرولیک #توربوماشین

#mechanicalengineering #centrifugalpump #cfd  #ansys #cfturbo

OpenFOAM basic course
دوره شبیه سازی با نرم افزار اوپن فوم

content:
https://lnkd.in/eNCRFbrT

More info and registration:
wa.me/989354699585

Follow us:
zil.ink/simpalgroup

hashtag#openfoam hashtag#cfd

CFD simulation of a cooling tower using wind-breaker
by Tohid Moghimi
SIMPAL GROUP
---------------------------

🔻One of the most important issues of #cooling towers is the #blocking of outlet air at the top of the tower and decreasing the performance in high-speed upstream wind flows.

🔻In this project, I used an aerodynamic concept that shows the #separation of flow around the cylinder starts between 120 to 130 degrees.

🔻Based on this idea and using  #CFD simulation, I designed a wind_breaker wall with some intake for this cooling tower which assumed the intakes are open after 120 degree. This helps the inside air to escape from the back side and the performance of the cooling tower increases!

-------------------------------------
Feel free to contact me :
📩 wa.me/989354699585

#CFD simulation course of #solidification is available now on SIMPAL GROUP YouTube channel

Part1: Spacelcaim
https://lnkd.in/eB3g5eQG

Part2: Ansys meshing
https://lnkd.in/e_TX3AVh

Part3: Ansys Fluent
https://lnkd.in/eBBv8R96

Part4: CFD post
https://lnkd.in/eeQc8_2g

Please support our channel and feel free to ask your questions ♥️

zil.ink/simpalgroup

--------------------------------------------------
🆔 @simpal_ir
🌐 simpalgroup.com

🔹Design and simulation of cyclone

🧑‍💻 by Tohid Moghimi

👥 SIMPAL GROUP

----------------------------------------------------
🔸طراحی و شبیه سازی سایکلون و غبار گیر

🖥️ نرم افزار Ansys CFX

👥 گروه سیمپال

🔻 ذرات با رنگ قرمز بیشترین چگالی را دارند زود تر از سایر ذرات ته نشین می شوند
---------------------------------------------------
more info:

📞 WhatsApp +989354699585
📩 info@simpalgroup.com
🌐 simpalgroup.com

#ansys #dpm #cfd

Register Now🎉

Centrifugal Pump Course

Design | CFTurbo
Simulation | Ansys

--------------------------------------------
🌀 دوره طراحی و شبیه سازی پمپ

📌بخش اول: طراحی
⁦👩‍💻⁩ مدرس: دکتر شاداب
⁦🖥️⁩ نرم افزار: CFTurbo
💥سر فصل ها:
🔻مقدمات (مبانی توربو ماشین)
🔻 طراحی پروانه
🔻طراحی ولوت

📌بخش دوم: شبیه سازی
⁦👨🏻‍💻⁩مدرس: مهندس مقیمی
⁦🖥️⁩ نرم افزار: Ansys workbench
💥سرفصل ها:
🔻شبکه بندی
🔻 تحلیل سیال
🔻تحلیل سازه
🔻 تقابل سازه-سیال
🔻بررسی پدیده سایش
🔻 بررسی پدیده کاویتاسیون

⁦⚠️⁩ قابلیت دانلود محتوی + پشتیبانی در گروه

مشاهده بخش هایی از دوره


----------------------------------------------
more info and registration:

📞 wa.me/+989354699585

🌐 zil.ink/simpalgroup
--------------------------------------------

#مکانیک #انسیس #انسیس_فلوئنت  #شبیه_سازی‌ #پمپ #سیالات #پایپینگ #هیدرولیک #توربوماشین

#mechanicalengineering #centrifugalpump #cfd  #ansys #cfturbo

🚀 From Solid to Fluid: Simplifying Volume Extraction in SpaceClaim 💡

SIMPAL GROUP

In this video, I walk through how to quickly create a fluid domain from a solid model in SpaceClaim using the VolumeExtract option.
Perfect for anyone working on CFD setups who wants to speed up geometry prep and focus more on the simulation.

📹 Watch the step-by-step process and see how this powerful tool can save you time and effort.

#CFD #SpaceClaim #Engineering #Simulation #DesignEfficiency #ANSYS #ProductivityTips


---

feel free to ask questions:
t.me/simpal_ansys
t.me/simpal_ansys_en
simpalgroup.com

Glory hole spillway | CFD simulation
SIMPAL GROUP

The glory hole spillway is a type of spillway used in dams or reservoirs to release excess water. It consists of a vertical, cylindrical or funnel-shaped structure with a large circular opening at the top. When water levels rise above the desired capacity, it flows over the dam and enters the glory hole spillway, which then channels the water downward and away from the dam. The name "glory hole" comes from the visual effect created when water plunges into the hole, often creating a spectacular display.

In this project, I used the VOF model to simulate the air-water flow inside it and estimated the massflow at the outlet.

contact for more info
📥 t.moghimi@ simpalgroup.com

#cfd #hydrolic

--------------------
Contact us:
zil.ink/simpalgroup