Media is too big
VIEW IN TELEGRAM
💿 فیلم نمونه آموزش نرم افزار Carrier HAP
🔰 @SIMPAL_ir
🎓 مدرس: مهندس مقیمی/ کارشناس ارشد تبدیل انرژی
🔸 در نسخه کامل این فیلم نحوه محاسبه بار حرارتی و برودتی یک مدرسه سه طبقه توسط این نرم افزار، به طور کامل آموزش داده خواهد شد.
برای دریافت نسخه کامل👇👇👇
@SIMPAL_course
#cacarrierHAP #Cooling_Heating_load
#آموزش #کریر
🔰 @SIMPAL_ir
🎓 مدرس: مهندس مقیمی/ کارشناس ارشد تبدیل انرژی
🔸 در نسخه کامل این فیلم نحوه محاسبه بار حرارتی و برودتی یک مدرسه سه طبقه توسط این نرم افزار، به طور کامل آموزش داده خواهد شد.
برای دریافت نسخه کامل👇👇👇
@SIMPAL_course
#cacarrierHAP #Cooling_Heating_load
#آموزش #کریر
⭕ Cooling Tower
👨🏻💻 By: @CFD_Moghimi
📌In this project, we studied the effect of the windshield on increasing mass flow outlet from cooling tower.
📌 In high velocity of wind, out air prevents the exit of inside air and so decrease the performance of the cooling tower.
📌Using a windshield at the top of the tower and use of separation concept helps to prevent outlet air blocking
🔎 Follow us:
🔶 telegram
🔷 instagram
#coolingtower #power #ansys #powerplant #shield #cooling #energy #heattransfer #mapna
👨🏻💻 By: @CFD_Moghimi
📌In this project, we studied the effect of the windshield on increasing mass flow outlet from cooling tower.
📌 In high velocity of wind, out air prevents the exit of inside air and so decrease the performance of the cooling tower.
📌Using a windshield at the top of the tower and use of separation concept helps to prevent outlet air blocking
🔎 Follow us:
🔶 telegram
#coolingtower #power #ansys #powerplant #shield #cooling #energy #heattransfer #mapna
CFD simulation of a cooling tower using wind-breaker
by Tohid Moghimi
SIMPAL GROUP
---------------------------
🔻One of the most important issues of #cooling towers is the #blocking of outlet air at the top of the tower and decreasing the performance in high-speed upstream wind flows.
🔻In this project, I used an aerodynamic concept that shows the #separation of flow around the cylinder starts between 120 to 130 degrees.
🔻Based on this idea and using #CFD simulation, I designed a wind_breaker wall with some intake for this cooling tower which assumed the intakes are open after 120 degree. This helps the inside air to escape from the back side and the performance of the cooling tower increases!
-------------------------------------
Feel free to contact me :
📩 wa.me/989354699585
by Tohid Moghimi
SIMPAL GROUP
---------------------------
🔻One of the most important issues of #cooling towers is the #blocking of outlet air at the top of the tower and decreasing the performance in high-speed upstream wind flows.
🔻In this project, I used an aerodynamic concept that shows the #separation of flow around the cylinder starts between 120 to 130 degrees.
🔻Based on this idea and using #CFD simulation, I designed a wind_breaker wall with some intake for this cooling tower which assumed the intakes are open after 120 degree. This helps the inside air to escape from the back side and the performance of the cooling tower increases!
-------------------------------------
Feel free to contact me :
📩 wa.me/989354699585