This media is not supported in your browser
VIEW IN TELEGRAM
⭕ دوره تحلیل توربین گاز با نرم افزار Ansys
👨🏻💻 سرفصل ها:
سطح مقدماتی
🔗 https://www.aparat.com/v/AyxYL
سطح پیشرفته
🔗 https://youtu.be/3sQViMTvtEA
گروه تخصصی انسیس
🔗@simpal_ansys
⁉️ اطلاع بیشتر و ثبت نام 👇
📞 WhatsApp +989354699585
🆔 @simpal_ir
#ansys #gasturbine
👨🏻💻 سرفصل ها:
سطح مقدماتی
🔗 https://www.aparat.com/v/AyxYL
سطح پیشرفته
🔗 https://youtu.be/3sQViMTvtEA
گروه تخصصی انسیس
🔗@simpal_ansys
⁉️ اطلاع بیشتر و ثبت نام 👇
📞 WhatsApp +989354699585
🆔 @simpal_ir
#ansys #gasturbine
This media is not supported in your browser
VIEW IN TELEGRAM
🔥 CFD analysis of HP gas turbine
🚁 Turboshaft engine of T55 honewell
🗣️ Language of the course: 🇬🇧 🇮🇷
👨🏻💻Teacher: Tohid Moghimi
🔗 Contents of the course
---------------------------------------------------------
🔥 بخش هایی از دوره جامع توربین گاز!
نرم افزار Ansys workbench
🔗 آشنایی با سرفصل های. دوره
🔻 این دوره شامل بیش از ۵ بخش مختلف نرم افزار انسیس می‌باشد:
▪️مفاهیم پایه توربین گاز
▪️آشنایی با طراحی و ایجاد دامین محاسباتی
▪️شبکه بندی ساختاری و بررسی کیفیت
▪️تنظیمات سیالاتی و جامداتی و FSI
▪️پس پردازش جریان و تحلیل تنش
📞more info and registration:
wa.me/989354699585
--------------------
Contact us:
🆔 telegram
🎞 instagram
#gasturbine #ansys #cfx
🚁 Turboshaft engine of T55 honewell
🗣️ Language of the course: 🇬🇧 🇮🇷
👨🏻💻Teacher: Tohid Moghimi
🔗 Contents of the course
---------------------------------------------------------
🔥 بخش هایی از دوره جامع توربین گاز!
نرم افزار Ansys workbench
🔗 آشنایی با سرفصل های. دوره
🔻 این دوره شامل بیش از ۵ بخش مختلف نرم افزار انسیس می‌باشد:
▪️مفاهیم پایه توربین گاز
▪️آشنایی با طراحی و ایجاد دامین محاسباتی
▪️شبکه بندی ساختاری و بررسی کیفیت
▪️تنظیمات سیالاتی و جامداتی و FSI
▪️پس پردازش جریان و تحلیل تنش
📞more info and registration:
wa.me/989354699585
--------------------
Contact us:
🆔 telegram
#gasturbine #ansys #cfx
👍1🎉1
This media is not supported in your browser
VIEW IN TELEGRAM
Particle tracking by Tohid Moghimi
🔻 The 2nd project of the #Ansys course
The #black particles which are heavier than others, cannot follow the streamline and impact the bottom of the channel
📌 The contents of Fa course 🇮🇷
https://www.aparat.com/v/qdTY7
👥 Free Q&AGroupp
📎 Fa: @simpal_ansys
📎 En: @simpal_ansys_en
more info and registration:
wa.me/+989354699585
--------------------
Contact us:
🆔 telegram
🎞 instagram
🔻 The 2nd project of the #Ansys course
The #black particles which are heavier than others, cannot follow the streamline and impact the bottom of the channel
📌 The contents of Fa course 🇮🇷
https://www.aparat.com/v/qdTY7
👥 Free Q&AGroupp
📎 Fa: @simpal_ansys
📎 En: @simpal_ansys_en
more info and registration:
wa.me/+989354699585
--------------------
Contact us:
🆔 telegram
👌2👍1
⚙️ How to simulate pressing process in #Ansys?
🔨 Sheet metal bending
Part1:
🔗https://youtu.be/Rxy0va-NTRs?si=5-tnXTBF4NDRxViK
Part2:
🔗https://youtu.be/7h-KQBpacao?si=IbAHYPxyLnzT9erK
If you enjoy learning about mechanical engineering software, join the SIMPAL GROUP YouTube channel and feel free to ask your questions in telegram groups 👇
⁉️ https://t.me/Simpal_ir/1402
--------------------
Contact us:
🆔 telegram
🎞 instagram
🔨 Sheet metal bending
Part1:
🔗https://youtu.be/Rxy0va-NTRs?si=5-tnXTBF4NDRxViK
Part2:
🔗https://youtu.be/7h-KQBpacao?si=IbAHYPxyLnzT9erK
If you enjoy learning about mechanical engineering software, join the SIMPAL GROUP YouTube channel and feel free to ask your questions in telegram groups 👇
⁉️ https://t.me/Simpal_ir/1402
--------------------
Contact us:
🆔 telegram
YouTube
Pressing simulation in ANSYS | sheet metal bending (Part 1) | (بخش اول) شبیه سازی پرس در انسیس
In this video (Part 1) of press simulation in Ansys, you learn how to create a simple press machine in space claim and how to define material to the bodies. Please subscribe and follow SIMPAL GROUP to don't miss the next parts
instagram.com/ simpal_ir
t.me/simpal_ir…
instagram.com/ simpal_ir
t.me/simpal_ir…
🚀 CFD simulation of NACA 6409
👨🏻💻 by Tohid Moghimi
🖱️Software: Ansys Fluent
You will learn how to create a #structural mesh in #Ansys meshing and CFD simulation to get Cl/Cd of the airfoil in #ansysflent
✅ Watch free here [+]
--------------------
Contact us:
🆔 telegram
🎞 instagram
👨🏻💻 by Tohid Moghimi
🖱️Software: Ansys Fluent
You will learn how to create a #structural mesh in #Ansys meshing and CFD simulation to get Cl/Cd of the airfoil in #ansysflent
✅ Watch free here [+]
--------------------
Contact us:
🆔 telegram
🔥4👍1
This media is not supported in your browser
VIEW IN TELEGRAM
Particle tracking by Tohid Moghimi
🔻 The 2nd project of the #Ansys course
The #black particles which are heavier than others, cannot follow the streamline and impact the bottom of the channel
📌 The contents of Fa course 🇮🇷
https://www.aparat.com/v/qdTY7
👥 Free Q&AGroupp
📎 Fa: @simpal_ansys
📎 En: @simpal_ansys_en
more info and registration:
wa.me/+989354699585
--------------------
Contact us:
🆔 telegram
🎞 instagram
🔻 The 2nd project of the #Ansys course
The #black particles which are heavier than others, cannot follow the streamline and impact the bottom of the channel
📌 The contents of Fa course 🇮🇷
https://www.aparat.com/v/qdTY7
👥 Free Q&AGroupp
📎 Fa: @simpal_ansys
📎 En: @simpal_ansys_en
more info and registration:
wa.me/+989354699585
--------------------
Contact us:
🆔 telegram
👌2
This media is not supported in your browser
VIEW IN TELEGRAM
Cyclone simulation course
Software: Ansys fluent + CFX
Language: Fa 🇮🇷 En 🇬🇧
SIMPAL GROUP
More info and registration:
wa.me/989354699585
#ansys #fluent #cyclon #cfx
Software: Ansys fluent + CFX
Language: Fa 🇮🇷 En 🇬🇧
SIMPAL GROUP
More info and registration:
wa.me/989354699585
#ansys #fluent #cyclon #cfx
👍1
Media is too big
VIEW IN TELEGRAM
CFD simulation Course| Particle tracking of #cyclone
Software: Ansys Fluent/CFX
by Tohid Moghimi
SIMPAL GROUP
🥇What you learn in this course:
🚩A general view of multiphase flows with a focus on the Lagrangian method
🚩Introduction to different forces on particles
🚩Introduction to different types of cyclone and governing equations
🚩3D modeling of a cyclone in #Space_claim
🚩Grid meshing in #Ansys_meshing with considering the quality of mesh factors
🚩Setup particle tracing simulation in both #Ansys_CFX and #Fluent
🚩Postprocessing in #CFD post and creating Animation
👨💻Language of the course: Fa & En
🔗For more info and registration:
wa.me/989354699585
simpalgroup.com
Software: Ansys Fluent/CFX
by Tohid Moghimi
SIMPAL GROUP
🥇What you learn in this course:
🚩A general view of multiphase flows with a focus on the Lagrangian method
🚩Introduction to different forces on particles
🚩Introduction to different types of cyclone and governing equations
🚩3D modeling of a cyclone in #Space_claim
🚩Grid meshing in #Ansys_meshing with considering the quality of mesh factors
🚩Setup particle tracing simulation in both #Ansys_CFX and #Fluent
🚩Postprocessing in #CFD post and creating Animation
👨💻Language of the course: Fa & En
🔗For more info and registration:
wa.me/989354699585
simpalgroup.com
Media is too big
VIEW IN TELEGRAM
Gas turbine simulation course
by Tohid Moghimi
Ansys trainer of SIMPAL GROUP
-----------------------------------
In this course you will learn:
🚩How to design the blade of a gas turbine and the computational domain
using #bladegen & #Design_modeler
🚩How to create a structural mesh in #Turbo_grid
🚩How to define the setup in #Ansys_CFX
🚩How to export CFD results in #CFD_post
🚩 How to simulate #thermal and #structural Analysis using #FSI method
--------------------------------------
🔗more info and registration
wa.me/98935469958
zil.ink/simpalgroup
by Tohid Moghimi
Ansys trainer of SIMPAL GROUP
-----------------------------------
In this course you will learn:
🚩How to design the blade of a gas turbine and the computational domain
using #bladegen & #Design_modeler
🚩How to create a structural mesh in #Turbo_grid
🚩How to define the setup in #Ansys_CFX
🚩How to export CFD results in #CFD_post
🚩 How to simulate #thermal and #structural Analysis using #FSI method
--------------------------------------
🔗more info and registration
wa.me/98935469958
zil.ink/simpalgroup
👍3
This media is not supported in your browser
VIEW IN TELEGRAM
Horizontal tube falling film evaporators are widely used in the refrigeration and chemical industry. Three-dimensional numerical model with different tube shapes is established in this project to simulate heat and mass transfer process with CFD method, and the heat transfer coefficient of simulation is also validated by experimental data
CFD modeling by Tohid Moghimi
SIMPAL GROUP
Feel free to contact:
wa.me/989354699585
#CFD #Ansys #heattransfer
CFD modeling by Tohid Moghimi
SIMPAL GROUP
Feel free to contact:
wa.me/989354699585
#CFD #Ansys #heattransfer
CFD simulation course of a cyclone
Software: #Ansys Fluent + CFX
by Tohid Moghimi
Ansys trainer at SIMPAL GROUP
This course is based on the #lagrangian approach and you will learn the following:
+ Basics of the #aerosol and design of a standard #cyclone
+ Discrete phase method (DPM)
+ Erosion model
+ Design a 3D cyclone in #spaceclaim with 2 approach
+ Create mesh grid in #Ansys_meshing and knowing mesh quality factors
+ Post-processing using #CFDPost software
* This course has 1 month of technical support
* Languages: En + فا
More info registration:
wa.me/989354699585
zil.ink/simpalgroup
Software: #Ansys Fluent + CFX
by Tohid Moghimi
Ansys trainer at SIMPAL GROUP
This course is based on the #lagrangian approach and you will learn the following:
+ Basics of the #aerosol and design of a standard #cyclone
+ Discrete phase method (DPM)
+ Erosion model
+ Design a 3D cyclone in #spaceclaim with 2 approach
+ Create mesh grid in #Ansys_meshing and knowing mesh quality factors
+ Post-processing using #CFDPost software
* This course has 1 month of technical support
* Languages: En + فا
More info registration:
wa.me/989354699585
zil.ink/simpalgroup
CFD simulation of T55 Gas turbine course
by Tohid Moghimi | Ansys trainer in Simpal Group
In this course you will learn the following:
+ Introduction to hashtag #gas_turbine
+ How to create the computational domain in hashtag #designmodeler
+ How to create a structural mesh in hashtag #turbogrid
+ CFD analysis in hashtag #Ansys CFX
+ Fluid-structure interaction (FSI)
+ Thermal/mechanical stress analysis
+ Postprocessing in hashtag #CFDpost
Content:
https://youtu.be/VacRDg3qrFc?si=dHQAspHJthCRH9cr
* 1 month of technical support from the teacher
* Language: En + فا
For more info and registration:
wa.me/989354699585
zil.ink/simpalgroup
by Tohid Moghimi | Ansys trainer in Simpal Group
In this course you will learn the following:
+ Introduction to hashtag #gas_turbine
+ How to create the computational domain in hashtag #designmodeler
+ How to create a structural mesh in hashtag #turbogrid
+ CFD analysis in hashtag #Ansys CFX
+ Fluid-structure interaction (FSI)
+ Thermal/mechanical stress analysis
+ Postprocessing in hashtag #CFDpost
Content:
https://youtu.be/VacRDg3qrFc?si=dHQAspHJthCRH9cr
* 1 month of technical support from the teacher
* Language: En + فا
For more info and registration:
wa.me/989354699585
zil.ink/simpalgroup
👍1👌1
This media is not supported in your browser
VIEW IN TELEGRAM
"Unlocking the power of the wind! 🌬️🔆
Just completed a simulation on the impact of wind flow on solar panel structures using ANSYS Fluent and ANSYS Structure with one-way FSI. Excited to contribute to more resilient and efficient solar energy solutions!
contact us: zil.ink/simpalgroup
🆔@simpal_ir
#RenewableEnergy #Simulation #ANSYS #Innovation
Just completed a simulation on the impact of wind flow on solar panel structures using ANSYS Fluent and ANSYS Structure with one-way FSI. Excited to contribute to more resilient and efficient solar energy solutions!
contact us: zil.ink/simpalgroup
🆔@simpal_ir
#RenewableEnergy #Simulation #ANSYS #Innovation
This media is not supported in your browser
VIEW IN TELEGRAM
⭕ دوره تحلیل توربین گاز با نرم افزار Ansys
👨🏻💻 سرفصل ها:
سطح مقدماتی
🔗 https://www.aparat.com/v/AyxYL
سطح پیشرفته
🔗 https://youtu.be/3sQViMTvtEA
گروه تخصصی انسیس
🔗@simpal_ansys
⁉️ اطلاع بیشتر و ثبت نام 👇
📞 WhatsApp +989354699585
🆔 @simpal_ir
#ansys #gasturbine
👨🏻💻 سرفصل ها:
سطح مقدماتی
🔗 https://www.aparat.com/v/AyxYL
سطح پیشرفته
🔗 https://youtu.be/3sQViMTvtEA
گروه تخصصی انسیس
🔗@simpal_ansys
⁉️ اطلاع بیشتر و ثبت نام 👇
📞 WhatsApp +989354699585
🆔 @simpal_ir
#ansys #gasturbine
This media is not supported in your browser
VIEW IN TELEGRAM
Register Now🎉
Centrifugal Pump Course
Design | CFTurbo
Simulation | Ansys
--------------------------------------------
🌀 دوره طراحی و شبیه سازی پمپ
📌بخش اول: طراحی
👩💻 مدرس: دکتر شاداب
🖥️ نرم افزار: CFTurbo
💥سر فصل ها:
🔻مقدمات (مبانی توربو ماشین)
🔻 طراحی پروانه
🔻طراحی ولوت
📌بخش دوم: شبیه سازی
👨🏻💻مدرس: مهندس مقیمی
🖥️ نرم افزار: Ansys workbench
💥سرفصل ها:
🔻شبکه بندی
🔻 تحلیل سیال
🔻تحلیل سازه
🔻 تقابل سازه-سیال
🔻بررسی پدیده سایش
🔻 بررسی پدیده کاویتاسیون
⚠️ قابلیت دانلود محتوی + پشتیبانی در گروه
مشاهده بخش هایی از دوره
----------------------------------------------
more info and registration:
📞 wa.me/+989354699585
🌐 zil.ink/simpalgroup
--------------------------------------------
#مکانیک #انسیس #انسیس_فلوئنت #شبیه_سازی #پمپ #سیالات #پایپینگ #هیدرولیک #توربوماشین
#mechanicalengineering #centrifugalpump #cfd #ansys #cfturbo
Centrifugal Pump Course
Design | CFTurbo
Simulation | Ansys
--------------------------------------------
🌀 دوره طراحی و شبیه سازی پمپ
📌بخش اول: طراحی
👩💻 مدرس: دکتر شاداب
🖥️ نرم افزار: CFTurbo
💥سر فصل ها:
🔻مقدمات (مبانی توربو ماشین)
🔻 طراحی پروانه
🔻طراحی ولوت
📌بخش دوم: شبیه سازی
👨🏻💻مدرس: مهندس مقیمی
🖥️ نرم افزار: Ansys workbench
💥سرفصل ها:
🔻شبکه بندی
🔻 تحلیل سیال
🔻تحلیل سازه
🔻 تقابل سازه-سیال
🔻بررسی پدیده سایش
🔻 بررسی پدیده کاویتاسیون
⚠️ قابلیت دانلود محتوی + پشتیبانی در گروه
مشاهده بخش هایی از دوره
----------------------------------------------
more info and registration:
📞 wa.me/+989354699585
🌐 zil.ink/simpalgroup
--------------------------------------------
#مکانیک #انسیس #انسیس_فلوئنت #شبیه_سازی #پمپ #سیالات #پایپینگ #هیدرولیک #توربوماشین
#mechanicalengineering #centrifugalpump #cfd #ansys #cfturbo
Gas turbine simulation course
by Tohid Moghimi
Ansys trainer of SIMPAL GROUP
-----------------------------------
In this course you will learn the following:
🚩How to design the blade of a gas turbine and the computational domain
using #bladegen & #Design_modeler
🚩How to create a structural mesh in #Turbo_grid
🚩How to define the setup in #Ansys_CFX
🚩How to export CFD results in #CFD_post
🚩 How to simulate #thermal and #structural Analysis using #FSI method
Cost: 150 $
50% off for group registration (+10 download)
--------------------------------------
🔗more info and registration
wa.me/98935469958
by Tohid Moghimi
Ansys trainer of SIMPAL GROUP
-----------------------------------
In this course you will learn the following:
🚩How to design the blade of a gas turbine and the computational domain
using #bladegen & #Design_modeler
🚩How to create a structural mesh in #Turbo_grid
🚩How to define the setup in #Ansys_CFX
🚩How to export CFD results in #CFD_post
🚩 How to simulate #thermal and #structural Analysis using #FSI method
Cost: 150 $
50% off for group registration (+10 download)
--------------------------------------
🔗more info and registration
wa.me/98935469958
❤2
Forwarded from SIMPAL GROUP | گروه سیمپال (To(-)iD)
This media is not supported in your browser
VIEW IN TELEGRAM
🔹Design and simulation of cyclone
🧑💻 by Tohid Moghimi
👥 SIMPAL GROUP
----------------------------------------------------
🔸طراحی و شبیه سازی سایکلون و غبار گیر
🖥️ نرم افزار Ansys CFX
👥 گروه سیمپال
🔻 ذرات با رنگ قرمز بیشترین چگالی را دارند زود تر از سایر ذرات ته نشین می شوند
---------------------------------------------------
more info:
📞 WhatsApp +989354699585
📩 info@simpalgroup.com
🌐 simpalgroup.com
#ansys #dpm #cfd
🧑💻 by Tohid Moghimi
👥 SIMPAL GROUP
----------------------------------------------------
🔸طراحی و شبیه سازی سایکلون و غبار گیر
🖥️ نرم افزار Ansys CFX
👥 گروه سیمپال
🔻 ذرات با رنگ قرمز بیشترین چگالی را دارند زود تر از سایر ذرات ته نشین می شوند
---------------------------------------------------
more info:
📞 WhatsApp +989354699585
📩 info@simpalgroup.com
🌐 simpalgroup.com
#ansys #dpm #cfd
Forwarded from SIMPAL GROUP | گروه سیمپال
This media is not supported in your browser
VIEW IN TELEGRAM
Register Now🎉
Centrifugal Pump Course
Design | CFTurbo
Simulation | Ansys
--------------------------------------------
🌀 دوره طراحی و شبیه سازی پمپ
📌بخش اول: طراحی
👩💻 مدرس: دکتر شاداب
🖥️ نرم افزار: CFTurbo
💥سر فصل ها:
🔻مقدمات (مبانی توربو ماشین)
🔻 طراحی پروانه
🔻طراحی ولوت
📌بخش دوم: شبیه سازی
👨🏻💻مدرس: مهندس مقیمی
🖥️ نرم افزار: Ansys workbench
💥سرفصل ها:
🔻شبکه بندی
🔻 تحلیل سیال
🔻تحلیل سازه
🔻 تقابل سازه-سیال
🔻بررسی پدیده سایش
🔻 بررسی پدیده کاویتاسیون
⚠️ قابلیت دانلود محتوی + پشتیبانی در گروه
مشاهده بخش هایی از دوره
----------------------------------------------
more info and registration:
📞 wa.me/+989354699585
🌐 zil.ink/simpalgroup
--------------------------------------------
#مکانیک #انسیس #انسیس_فلوئنت #شبیه_سازی #پمپ #سیالات #پایپینگ #هیدرولیک #توربوماشین
#mechanicalengineering #centrifugalpump #cfd #ansys #cfturbo
Centrifugal Pump Course
Design | CFTurbo
Simulation | Ansys
--------------------------------------------
🌀 دوره طراحی و شبیه سازی پمپ
📌بخش اول: طراحی
👩💻 مدرس: دکتر شاداب
🖥️ نرم افزار: CFTurbo
💥سر فصل ها:
🔻مقدمات (مبانی توربو ماشین)
🔻 طراحی پروانه
🔻طراحی ولوت
📌بخش دوم: شبیه سازی
👨🏻💻مدرس: مهندس مقیمی
🖥️ نرم افزار: Ansys workbench
💥سرفصل ها:
🔻شبکه بندی
🔻 تحلیل سیال
🔻تحلیل سازه
🔻 تقابل سازه-سیال
🔻بررسی پدیده سایش
🔻 بررسی پدیده کاویتاسیون
⚠️ قابلیت دانلود محتوی + پشتیبانی در گروه
مشاهده بخش هایی از دوره
----------------------------------------------
more info and registration:
📞 wa.me/+989354699585
🌐 zil.ink/simpalgroup
--------------------------------------------
#مکانیک #انسیس #انسیس_فلوئنت #شبیه_سازی #پمپ #سیالات #پایپینگ #هیدرولیک #توربوماشین
#mechanicalengineering #centrifugalpump #cfd #ansys #cfturbo
Media is too big
VIEW IN TELEGRAM
🚀 From Solid to Fluid: Simplifying Volume Extraction in SpaceClaim 💡
SIMPAL GROUP
In this video, I walk through how to quickly create a fluid domain from a solid model in SpaceClaim using the VolumeExtract option.
Perfect for anyone working on CFD setups who wants to speed up geometry prep and focus more on the simulation.
📹 Watch the step-by-step process and see how this powerful tool can save you time and effort.
#CFD #SpaceClaim #Engineering #Simulation #DesignEfficiency #ANSYS #ProductivityTips
---
feel free to ask questions:
t.me/simpal_ansys
t.me/simpal_ansys_en
simpalgroup.com
SIMPAL GROUP
In this video, I walk through how to quickly create a fluid domain from a solid model in SpaceClaim using the VolumeExtract option.
Perfect for anyone working on CFD setups who wants to speed up geometry prep and focus more on the simulation.
📹 Watch the step-by-step process and see how this powerful tool can save you time and effort.
#CFD #SpaceClaim #Engineering #Simulation #DesignEfficiency #ANSYS #ProductivityTips
---
feel free to ask questions:
t.me/simpal_ansys
t.me/simpal_ansys_en
simpalgroup.com