(Updated) T-Display S3 Pro adds a 2.33” screen and phone OTG support

LILYGO has introduced the T-Display S3 Pro, a solution designed for portable applications that require multi-touch display support. This compact device not only boasts a 400mA battery but also integrates a range of sensors and offers optional IMU support. Similarly as the standard T-Display-S3 released some time ago, this upgraded version accommodates the following ESP32-S3 […]

#devices #2023 #esp32_s3 #lilygo | @linuxgizmos

LILYGO T3 S3 LR1121: Low-Power LoRa Transceiver for IoT Applications

The LILYGO T3 S3 LR1121 is a development board that supports low-power, long-range wireless communication using LoRa technology. It features the ESP32-S3 System-on-Chip, which offers 2.4 GHz Wi-Fi and Bluetooth Low Energy connectivity, making it suitable for various IoT projects. At the core of the board is the ESP32S3FH4R2 microcontroller, which includes dual-core Xtensa LX7 […]

#chips #sbcs_coms #esp_32 #esp32_s3 #lilygo #lora | @linuxgizmos

LILYGO T-Embed CC1101: Enabling Sub-GHz and NFC/RFID Communication

LILYGO launched the T-Embed CC1101, built around the ESP32-S3 Dual-core LX7. It supports Wi-Fi, BLE 5, and Sub-GHz wireless communication, targeting remote and low-power IoT projects. The ESP32-S3 microcontroller is paired with 16MB of Flash memory and 8MB of PSRAM. The CC1101 chip operates across frequency bands of 300-348 MHz, 387-464 MHz, and 779-928 MHz, […]

#chips #sbcs_coms #esp32_s3 #lilygo #nfc #rfid #sub_ghz | @linuxgizmos

T Display S3 AMOLED Plus with Enhanced 1.91″ Display and Real Time Clock

The T-Display S3 AMOLED Plus is an upgraded development board based on the ESP32-S3 microcontroller with a dual-core LX7 processor. It features a 1.91″ AMOLED display with a 240×536 resolution, using RM67162 IPS AMOLED technology for sharp colors and full viewing angles with QSPI interface support. Similar to the LILYGO T4 S3 launched last year, […]

#devices #sbcs_coms #amoled #arduino #esp32_s3 #lilygo #micropython #t_display_s3_amoled_plus | @linuxgizmos

LILYGO to Launch ESP32-Based Gizmo with E-Paper Display, LoRa, and MagSafe Charging

The T5 E-Paper S3 Pro is a compact development board featuring the ESP32-S3-WROOM-1 microcontroller alongside advanced capabilities. Designed for low-power applications, it integrates wireless connectivity, e-paper technology, and peripheral support This specific board is powered by the ESP32-S3-WROOM-1 module, which includes 16MB of flash memory and 8MB of PSRAM, supporting 2.4 GHz Wi-Fi and BLE […]

#devices #sbcs_coms #e_paper #esp32 #esp32_s3 #lilygo #lora #magsafe_charging | @linuxgizmos

Low-Cost ESP32-PICO-D4 Board with LoRa, Wi-Fi, and BLE Connectivity

The LILYGO T3 V3.0 TCXO is a development board based on the ESP32 microcontroller, offering integrated Wi-Fi and Bluetooth V4.2 + BLE connectivity. It features multiple GPIOs, QWIIC connectors, and LiPo battery support, making it suitable for portable applications. Unlike other LILYGO products with LoRa support, such as the T5 E-Paper S3 Pro, the T3 […]

#chips #devices #esp32 #esp32_pico_d4 #lilygo #lipo #lora #solar | @linuxgizmos

$6.80 LILYGO T7-C6 Board Leverages RISC-V Single-Core Processor & 4MB Integrated Flash Memory

The LILYGO T7-C6 is a compact development board built around the ESP32-C6-MINI-1 module, offering versatile features designed for IoT and wireless communication applications. The board is available with either an onboard PCB antenna or an external antenna and supports modern wireless protocols, including 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4. The ESP32-C6-MINI-1 […]

#chips #sbcs_coms #arduino #esp32 #esp32_c6 #lilygo #lilygo_t7_c6 #micropython #risc_v | @linuxgizmos

T-Connect-Pro: An ESP32-S3 Based Industrial Communication Module

LILYGO recently introduced the T-Connect-Pro, a communication module built around the ESP32-S3-R8 microcontroller. It consists of three stacked circuit boards and integrates multiple interfaces, including CAN, RS485, RS232, Ethernet, and LoRa. Designed for long-distance data transmission, the module includes a TFT LCD screen for configuration and monitoring. The core of the T-Connect-Pro is the ESP32-S3-R8 […]

#sbcs_coms #esp32 #industrial_module #iot #lilygo #radiolib #relay #t_connect_pro | @linuxgizmos

LILYGO Upgrades T-Watch S3 with GPS and a 940mAh Battery

LILYGO has introduced the T-Watch S3 Plus, an upgraded version of its ESP32-based smartwatch. While maintaining the open-source flexibility of its predecessor, this new model adds GPS positioning, a larger 940mAh battery, and refined hardware features. It supports Arduino-IDE and VS Code making it an adaptable platform for developers and hobbyists. The T-Watch S3 Plus […]

#devices #arduino #lilygo #open_source #smartwatch #t_watch_s3 #t_watch_s3_plus | @linuxgizmos

T-Display K230 Combines RISC-V Processing with LoRa, Wi-Fi, and AMOLED Display

The LILYGO T-Display K230 is a compact development board targeting IoT and embedded system applications. It features the Kendryte K230 system-on-chip, which includes a dual-core 64-bit RISC-V processor and dedicated units for AI acceleration, graphics rendering, and multimedia processing. The K230 SoC includes two CPU cores: CPU1 operates at 1.6 GHz, while CPU0 runs at […]

#sbcs_coms #amoled #k230 #kendryte #lilygo #lora #risc_v #wi_fi | @linuxgizmos

LILYGO T-Deck Pro Offers E-Paper Display with Configurable 4G and Voice Options

LILYGO has introduced the T-Deck Pro, an open-source development board with a built-in keyboard and a 3.1-inch e-paper touchscreen. Combining sensor integration with touchscreen functionality, it can be applied to various projects in areas like IoT and portable devices. The board features the ESP32-S3FN16R8 dual-core LX7 microprocessor, similar to the T-Deck Plus released in December. […]

#sbcs_coms #4g #arduino #audio #e_paper #esp32 #esp32s3 #gps #iot #lilygo #t_deck_pro | @linuxgizmos

LILYGO T-Echo Lite Offers Integrated LoRa, GNSS, and E-Paper Display in Compact Form

The LILYGO T-Echo Lite is a compact wireless development board designed for embedded applications that require long-range communication, positioning, and low-power display capabilities. Built around the Nordic nRF52840 microcontroller, the platform supports a wide range of wireless protocols and is available in several hardware configurations. The main processing component is the nRF52840, a 64 MHz […]

#sbcs_coms #arm_cortex_m4f #bluetooth #lilygo #lilygo_t_echo_lite #nrf52840 #thread #zigbee | @linuxgizmos

LILYGO T-Embed SI4732 Combines ESP32 S3 with All Band Radio Tuning

LILYGO has introduced a new version of its T-Embed series that incorporates the SI4732 A10 tuner module. This version supports AM, FM, shortwave, and longwave radio bands in a handheld format that visually resembles devices like the Flipper Zero. The T-Embed SI4732 uses the ESP32 S3 microcontroller with a dual-core LX7 processor clocked at 240 […]

#devices #am #esp32 #esp32_s3 #flipper_zero #fm #lilygo #longwave #radio_tuning #shortwave #si4732_a10 #t_embed #tuner_module | @linuxgizmos

T-LoRa Pager Combines ESP32-S3, LoRa, NFC, and GNSS in Handheld IoT Device

The T-LoRa Pager is a compact, programmable IoT development device designed by LILYGO. It integrates LoRa connectivity, NFC capabilities, GNSS positioning, and motion sensing via an embedded IMU, all within a portable form factor. Powered by the ESP32-S3 microcontroller, the device includes 16MB of flash memory and 8MB of PSRAM. The board features an RTC […]

#devices #esp32_s3 #gnss #imu #lilygo #lora #nfc #t_lora_pager | @linuxgizmos

T-Display S3 Pro LR1121 Adds Dual-Band LoRa via Expansion Shield

LILYGO has released the T-Display S3 Pro LR1121, a modular variant designed to expand the capabilities of the standard T-Display S3 Pro. Instead of integrating a camera module like another Pro variant, this version introduces dual-band LoRa connectivity, audio input/output, vibration feedback, and a larger battery, all packaged in a stackable shield form. The LR1121 […]

#sbcs_coms #esp32 #esp32_s3r8 #lilygo #lora #sub_ghz #t_display_s3_pro #xtensa_lx7 | @linuxgizmos

LILYGO T-Watch Ultra Features ESP32-S3, AMOLED Display, GNSS, and LoRa Connectivity

LILYGO has unveiled the T-Watch Ultra, a multifunctional smartwatch platform that integrates wireless connectivity, location tracking, long-range communication, and intelligent motion sensing in a compact form. Built around the Espressif ESP32-S3, the device is targeted at developers working on embedded, wearable, and remote sensing applications. The ESP32-S3 used in the T-Watch Ultra features a dual […]

#devices #amoled #esp32_s3 #imu #lilygo #smartwatch #t_watch_ultra | @linuxgizmos

LILYGO Launches Four New ESP32-S3 Boards for LoRa, Display, Motion, and CAN Applications

LILYGO has announced four new ESP32-S3-based development boards targeting a diverse range of embedded and IoT applications. These boards combine wireless connectivity with specialized hardware such as e-paper displays, CAN interfaces, motion sensors, and GPS modules, and are designed for rapid prototyping and deployment using familiar platforms like Arduino IDE, PlatformIO, and ESP-IDF. The T-Beam […]

#devices #arduino #can #embedded #esp_idf #esp32 #gps #iot #lilygo #lora #microcontrollers | @linuxgizmos

(Updated) LILYGO T-Embed CC1101: Enabling Sub-GHz and NFC/RFID Communication

LILYGO launched the T-Embed CC1101, built around the ESP32-S3 Dual-core LX7. It supports Wi-Fi, BLE 5, and Sub-GHz wireless communication, targeting remote and low-power IoT projects. The ESP32-S3 microcontroller is paired with 16MB of Flash memory and 8MB of PSRAM. The CC1101 chip operates across frequency bands of 300-348 MHz, 387-464 MHz, and 779-928 MHz, […]

#chips #sbcs_coms #esp32_s3 #lilygo #nfc #rfid #sub_ghz | @linuxgizmos