Seeed Studio XIAO ESP32C6 with Matter support starts at $5.20

SeeedStudio has recently introduced a new addition to their XIAO Series development boards. This latest board brings support for Wi-Fi 6/Bluetooth 5 and integrates Matter compatibility due to its ESP32-C6 integration. This product stands as the first ESP32-C6-based development board by SeeedStudio and the 8th device in the XIAO Series. It features a high-performance processor […]

#chips #devices #sbcs_coms #2024 #arduino_compatible #bluetooth_5 #esp32_c6 #iot_development_board #matter_compatibility #thread_protocol #wi_fi_6 #zigbee | @linuxgizmos

M5Stack BugC2: Compact Robotics Gizmo with STM32 MCU & Motor Drivers

The BugC2 with M5StickC PLUS2 is a versatile programmable robot base compatible with the M5StickC series controllers designed for new or advanced users due to its Arduino compatibility.   For reference, the STM32F0304 microcontrollers feature the Arm Cortex-M0 32-bit RISC core, operating at a frequency of 48 MHz. The product page states that this tiny […]

#chips #devices #sbcs_coms #2024 #arduino #bugc2 #iot #m5stack #mcu #robotics #stm32 | @linuxgizmos

ESP32-Based Module with 3MP Camera and 9-Axis Sensor System

The ATOMS3R Camera Kit M12 is a compact, programmable IoT controller featuring a 3-megapixel OV3660 camera for high-resolution image capture. Designed for IoT applications, motion detection, wearable devices, and educational development, its small form factor is suited for various embedded projects. Powered by the ESP32-S3-PICO-1-N8R8, the kit features an embedded ESP32-S3 SoC with a dual-core […]

#devices #3mp #arduino #camera #esp32 #m5stack | @linuxgizmos

T Display S3 AMOLED Plus with Enhanced 1.91″ Display and Real Time Clock

The T-Display S3 AMOLED Plus is an upgraded development board based on the ESP32-S3 microcontroller with a dual-core LX7 processor. It features a 1.91″ AMOLED display with a 240×536 resolution, using RM67162 IPS AMOLED technology for sharp colors and full viewing angles with QSPI interface support. Similar to the LILYGO T4 S3 launched last year, […]

#devices #sbcs_coms #amoled #arduino #esp32_s3 #lilygo #micropython #t_display_s3_amoled_plus | @linuxgizmos

$6.80 LILYGO T7-C6 Board Leverages RISC-V Single-Core Processor & 4MB Integrated Flash Memory

The LILYGO T7-C6 is a compact development board built around the ESP32-C6-MINI-1 module, offering versatile features designed for IoT and wireless communication applications. The board is available with either an onboard PCB antenna or an external antenna and supports modern wireless protocols, including 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4. The ESP32-C6-MINI-1 […]

#chips #sbcs_coms #arduino #esp32 #esp32_c6 #lilygo #lilygo_t7_c6 #micropython #risc_v | @linuxgizmos

UNIT DualMCU One with RP2040 for Real-Time and ESP32 for Wireless Connectivity.

The UNIT DualMCU One is a development board that combines the ESP32 and RP2040 microcontrollers. The ESP32 provides Wi-Fi and Bluetooth connectivity, while the RP2040 offers hardware control with flexible GPIO, supporting applications in IoT, robotics, and automation. The RP2040 features a dual-core ARM Cortex-M0+ processor running at 133 MHz, offering compatibility with Arduino UNO […]

#devices #arduino #esp32 #rp2040 | @linuxgizmos

Polverine Leverages ESP32-S3 and Bosch Sensors for Air Quality Tracking

Crowd Supply recently featured Polverine, a mikroBUS-compatible environmental sensing board for real-time air quality monitoring. It detects pollution, gas leaks, and supports ventilation control. Its compact, low-power design makes it suitable for portable and wearable applications, with Bosch Sensortec’s BMV080 PM2.5 and BME690 gas sensors providing data over Wi-Fi and Bluetooth via the ESP32-S3-MINI-1 microcontroller. […]

#sbcs_coms #air_quality #arduino #crowdsupply #esp32 #mikrobus #polverine | @linuxgizmos

Adafruit Metro RP2350 is Available for $24.95 with Arduino Form Factor Compatibility

The Adafruit Metro RP2350 is designed for projects that require Arduino form-factor compatibility, multiple GPIO options, and debugging capabilities. Built around the Raspberry Pi RP2350 microcontroller, this board provides various connectivity features and programming support, making it a flexible choice for embedded development. As its name suggests, the Metro RP2350 features the RP2350 microcontroller running […]

#sbcs_coms #adafruit #adafruit_metro_rp2350 #arduino #arm_cortex_m33 #raspberry_pi #rp2350 | @linuxgizmos

LILYGO Upgrades T-Watch S3 with GPS and a 940mAh Battery

LILYGO has introduced the T-Watch S3 Plus, an upgraded version of its ESP32-based smartwatch. While maintaining the open-source flexibility of its predecessor, this new model adds GPS positioning, a larger 940mAh battery, and refined hardware features. It supports Arduino-IDE and VS Code making it an adaptable platform for developers and hobbyists. The T-Watch S3 Plus […]

#devices #arduino #lilygo #open_source #smartwatch #t_watch_s3 #t_watch_s3_plus | @linuxgizmos

M5Stamp PLC Controller with Opto-Isolated Inputs, Relays, PWR CAN, and RS485

The M5Stamp PLC Controller, built on the StampS3A module, is a compact programmable logic controller designed for industrial automation and remote monitoring. With wireless connectivity, versatile I/O, and industrial communication support, it fits applications such as smart manufacturing and distributed control. The StamPLC leverages the StampS3A, which incorporates an ESP32-S3FN8 microcontroller with 8MB of flash […]

#devices #sbcs_coms #arduino #can #esp32 #m5stack #plc #stamplc #stamps3a | @linuxgizmos

LILYGO T-Deck Pro Offers E-Paper Display with Configurable 4G and Voice Options

LILYGO has introduced the T-Deck Pro, an open-source development board with a built-in keyboard and a 3.1-inch e-paper touchscreen. Combining sensor integration with touchscreen functionality, it can be applied to various projects in areas like IoT and portable devices. The board features the ESP32-S3FN16R8 dual-core LX7 microprocessor, similar to the T-Deck Plus released in December. […]

#sbcs_coms #4g #arduino #audio #e_paper #esp32 #esp32s3 #gps #iot #lilygo #t_deck_pro | @linuxgizmos

ESP32-P4-Module-DEV-KIT Introduces Wi-Fi 6, Dual-Core RISC-V, and Ethernet

The ESP32-P4-Module-DEV-KIT is a low-cost development board based on the ESP32-P4, with an integrated ESP32-C6 coprocessor. It supports Wi-Fi 6, Bluetooth 5/BLE, and is designed for embedded HMI applications and edge computing. The board features a 400 MHz RISC-V 32-bit dual-core processor for performance-intensive tasks, along with a low-power RISC-V single-core processor running at up […]

#sbcs_coms #arduino #embedded #esp_idf #esp32 #esp32_c6 #esp32_p4 #waveshare | @linuxgizmos

Arduino Uno Gets Upgraded with Integrated Ethernet and USB Type-C

The UnoNet is a microcontroller board based on the ATmega328PB, designed with the same form factor and pin layout as the Arduino Uno Rev 3. It integrates Ethernet via a W5500 controller and includes a USB Type-C port, RJ45 connector, DC barrel jack, ICSP header, and reset button. The ATmega328PB is clocked at 16 MHz […]

#sbcs_coms #arduino #arduino_ide #arduino_uno #atmega328pb #cp2102n #ethernet #ilabs #silicon_labs #unonet | @linuxgizmos

Coin-Sized RA4M1-Zero Board Features 32-Bit RA4M1 MCU

The RA4M1-Zero is a compact development board based on Renesas’ 32-bit RA4M1 MCU. Running at 48 MHz with a built-in FPU, it features firmware encryption, secure boot, and a castellated design for easy integration into custom hardware. The board uses the R7FA4M1AB3CFM microcontroller from the RA4M1 family. It includes 256 KB of flash memory, 32 […]

#uncategorized #32_bit #arduino #fpu #r7fa4m1ab3cfm #ra4m1_zero #renesas #waveshare | @linuxgizmos

Arduino and Red Pitaya Learning Lab Connects Makers with Real-World Engineering

Arduino and Red Pitaya have partnered on a hardware bundle and structured curriculum that helps students, educators, and hobbyists advance from basic electronics projects to practical signal analysis and system prototyping. Combining the Arduino Uno R4 WiFi with the Red Pitaya STEMlab 125-14, the kit supports hands-on experiments that link simple interfacing with engineering-grade measurement. […]

#sbcs_coms #arduino #arduino_uno_r4_wifi #fpga #learning #ra4m1 #red_pitaya #renesas | @linuxgizmos

LILYGO Launches Four New ESP32-S3 Boards for LoRa, Display, Motion, and CAN Applications

LILYGO has announced four new ESP32-S3-based development boards targeting a diverse range of embedded and IoT applications. These boards combine wireless connectivity with specialized hardware such as e-paper displays, CAN interfaces, motion sensors, and GPS modules, and are designed for rapid prototyping and deployment using familiar platforms like Arduino IDE, PlatformIO, and ESP-IDF. The T-Beam […]

#devices #arduino #can #embedded #esp_idf #esp32 #gps #iot #lilygo #lora #microcontrollers | @linuxgizmos

XIAO ESP32S3 Sense Kit Now Bundled with Free Machine Learning Textbook

Seeed Studio has reintroduced its 2022-era XIAO ESP32S3 Sense as part of a new educational kit bundled with accessories and the open-access textbook Machine Learning Systems: Design and Implementation, developed by Prof. Vijay Janapa Reddi and contributors from Harvard and the open-source community. The XIAO ESP32S3 Sense is a compact board based on Espressif’s ESP32-S3 […]

#devices #arduino #edge #machine_learning #tinyml #xiao | @linuxgizmos

Low-Cost FireBeetle 2 ESP32-P4 Now Available with Wi-Fi 6, MIPI CSI/DSI, and RISC-V Core

DFRobot has officially introduced the FireBeetle 2 ESP32-P4, a compact microcontroller board built for computer vision and multimedia projects. Priced at $11.90, it pairs the ESP32-P4 SoC with a companion co-processor for Wi-Fi 6 and Bluetooth connectivity, targeting applications such as cameras, smart home devices, and interactive interfaces. The ESP32-P4 includes a 360 MHz dual-core […]

#devices #arduino #dfrobot #esp32_c6 #esp32_p4 #firebeetle_2 #risc_v #tensorflow_lite | @linuxgizmos