Leetcode-cn.com 2021-09-07
🟢 1221.split-a-string-in-balanced-strings

🏷️ Tags
#greedy #string #counting

Description
在一个 平衡字符串 中，'L' 和 'R' 字符的数量是相同的。

给你一个平衡字符串 s，请你将它分割成尽可能多的平衡字符串。

注意：分割得到的每个字符串都必须是平衡字符串。

返回可以通过分割得到的平衡字符串的 最大数量 。

 

Example

输入：s = "RLRRLLRLRL"
输出：4
解释：s 可以分割为 "RL"、"RRLL"、"RL"、"RL" ，每个子字符串中都包含相同数量的 'L' 和 'R' 。

Leetcode.com 2021-09-06
🟢 1629.slowest-key

🏷️ Tags
#array #string

Description
A newly designed keypad was tested, where a tester pressed a sequence of n keys, one at a time.

You are given a string keysPressed of length n, where keysPressed[i] was the ith key pressed in the testing sequence, and a sorted list releaseTimes, where releaseTimes[i] was the time the ith key was released. Both arrays are 0-indexed. The 0th key was pressed at the time 0, and every subsequent key was pressed at the exact time the previous key was released.

The tester wants to know the key of the keypress that had the longest duration. The ith keypress had a duration of releaseTimes[i] - releaseTimes[i - 1], and the 0th keypress had a duration of releaseTimes[0].

Note that the same key could have been pressed multiple times during the test, and these multiple presses of the same key may not have had the same duration.

Return the key of the keypress that had the longest duration. If there are multiple such keypresses, return the lexicographically largest key of the keypresses.

Example

Input: releaseTimes = [9,29,49,50], keysPressed = "cbcd"
Output: "c"
Explanation: The keypresses were as follows:
Keypress for 'c' had a duration of 9 (pressed at time 0 and released at time 9).
Keypress for 'b' had a duration of 29 - 9 = 20 (pressed at time 9 right after the release of the previous character and released at time 29).
Keypress for 'c' had a duration of 49 - 29 = 20 (pressed at time 29 right after the release of the previous character and released at time 49).
Keypress for 'd' had a duration of 50 - 49 = 1 (pressed at time 49 right after the release of the previous character and released at time 50).
The longest of these was the keypress for 'b' and the second keypress for 'c', both with duration 20.
'c' is lexicographically larger than 'b', so the answer is 'c'.

Leetcode-cn.com 2021-09-08
🔴 502.ipo

🏷️ Tags
#greedy #array #sorting #heap_priority_queue

Description
假设 力扣（LeetCode）即将开始其 IPO。为了以更高的价格将股票卖给风险投资公司，力扣 希望在 IPO 之前开展一些项目以增加其资本。 由于资源有限，它只能在 IPO 之前完成最多 k 个不同的项目。帮助 力扣 设计完成最多 k 个不同项目后得到最大总资本的方式。

给定若干个项目。对于每个项目 i，它都有一个纯利润 Pi，并且需要最小的资本 Ci 来启动相应的项目。最初，你有 W 资本。当你完成一个项目时，你将获得纯利润，且利润将被添加到你的总资本中。

总而言之，从给定项目中选择最多 k 个不同项目的列表，以最大化最终资本，并输出最终可获得的最多资本。

 

Example

输入：k=2, W=0, Profits=[1,2,3], Capital=[0,1,1].
输出：4
解释：
由于你的初始资本为 0，你仅可以从 0 号项目开始。
在完成后，你将获得 1 的利润，你的总资本将变为 1。
此时你可以选择开始 1 号或 2 号项目。
由于你最多可以选择两个项目，所以你需要完成 2 号项目以获得最大的资本。
因此，输出最后最大化的资本，为 0 + 1 + 3 = 4。

Leetcode.com 2021-09-07
🟢 206.reverse-linked-list

🏷️ Tags
#recursion #linked_list

Description
Given the head of a singly linked list, reverse the list, and return the reversed list.

Example

Input: head = [1,2,3,4,5]
Output: [5,4,3,2,1]

Leetcode-cn.com 2021-09-09
🔴 68.text-justification

🏷️ Tags
#string #simulation

Description
给定一个单词数组和一个长度 maxWidth，重新排版单词，使其成为每行恰好有 maxWidth 个字符，且左右两端对齐的文本。

你应该使用“贪心算法”来放置给定的单词；也就是说，尽可能多地往每行中放置单词。必要时可用空格 ' ' 填充，使得每行恰好有 maxWidth 个字符。

要求尽可能均匀分配单词间的空格数量。如果某一行单词间的空格不能均匀分配，则左侧放置的空格数要多于右侧的空格数。

文本的最后一行应为左对齐，且单词之间不插入额外的空格。

说明:


单词是指由非空格字符组成的字符序列。
每个单词的长度大于 0，小于等于 maxWidth。
输入单词数组 words 至少包含一个单词。


Example

输入:
words = ["This", "is", "an", "example", "of", "text", "justification."]
maxWidth = 16
输出:
[
   "This    is    an",
   "example  of text",
   "justification.  "
]

Leetcode.com 2021-09-08
🟡 848.shifting-letters

🏷️ Tags
#array #string

Description
You are given a string s of lowercase English letters and an integer array shifts of the same length.

Call the shift() of a letter, the next letter in the alphabet, (wrapping around so that 'z' becomes 'a').


For example, shift('a') = 'b', shift('t') = 'u', and shift('z') = 'a'.


Now for each shifts[i] = x, we want to shift the first i + 1 letters of s, x times.

Return the final string after all such shifts to s are applied.

Example

Input: s = "abc", shifts = [3,5,9]
Output: "rpl"
Explanation: We start with "abc".
After shifting the first 1 letters of s by 3, we have "dbc".
After shifting the first 2 letters of s by 5, we have "igc".
After shifting the first 3 letters of s by 9, we have "rpl", the answer.

Leetcode-cn.com 2021-09-10
🟡 1894.find-the-student-that-will-replace-the-chalk

🏷️ Tags
#array #binary_search #prefix_sum #simulation

Description
一个班级里有 n 个学生，编号为 0 到 n - 1 。每个学生会依次回答问题，编号为 0 的学生先回答，然后是编号为 1 的学生，以此类推，直到编号为 n - 1 的学生，然后老师会重复这个过程，重新从编号为 0 的学生开始回答问题。

给你一个长度为 n 且下标从 0 开始的整数数组 chalk 和一个整数 k 。一开始粉笔盒里总共有 k 支粉笔。当编号为 i 的学生回答问题时，他会消耗 chalk[i] 支粉笔。如果剩余粉笔数量 严格小于 chalk[i] ，那么学生 i 需要 补充 粉笔。

请你返回需要 补充 粉笔的学生 编号 。

 

Example

输入：chalk = [5,1,5], k = 22
输出：0
解释：学生消耗粉笔情况如下：
- 编号为 0 的学生使用 5 支粉笔，然后 k = 17 。
- 编号为 1 的学生使用 1 支粉笔，然后 k = 16 。
- 编号为 2 的学生使用 5 支粉笔，然后 k = 11 。
- 编号为 0 的学生使用 5 支粉笔，然后 k = 6 。
- 编号为 1 的学生使用 1 支粉笔，然后 k = 5 。
- 编号为 2 的学生使用 5 支粉笔，然后 k = 0 。
编号为 0 的学生没有足够的粉笔，所以他需要补充粉笔。

Leetcode.com 2021-09-09
🟡 764.largest-plus-sign

🏷️ Tags
#array #dynamic_programming

Description
You are given an integer n. You have an n x n binary grid grid with all values initially 1's except for some indices given in the array mines. The ith element of the array mines is defined as mines[i] = [xi, yi] where grid[xi][yi] == 0.

Return the order of the largest axis-aligned plus sign of 1's contained in grid. If there is none, return 0.

An axis-aligned plus sign of 1's of order k has some center grid[r][c] == 1 along with four arms of length k - 1 going up, down, left, and right, and made of 1's. Note that there could be 0's or 1's beyond the arms of the plus sign, only the relevant area of the plus sign is checked for 1's.

Example

Input: n = 5, mines = [[4,2]]
Output: 2
Explanation: In the above grid, the largest plus sign can only be of order 2. One of them is shown.

Leetcode-cn.com 2021-09-11
🔴 600.non-negative-integers-without-consecutive-ones

🏷️ Tags
#dynamic_programming

Description
给定一个正整数 n，找出小于或等于 n 的非负整数中，其二进制表示不包含 连续的1 的个数。

Example

输入: 5
输出: 5
解释: 
下面是带有相应二进制表示的非负整数<= 5：
0 : 0
1 : 1
2 : 10
3 : 11
4 : 100
5 : 101
其中，只有整数3违反规则（有两个连续的1），其他5个满足规则。

Leetcode.com 2021-09-10
🔴 446.arithmetic-slices-ii-subsequence

🏷️ Tags
#array #dynamic_programming

Description
Given an integer array nums, return the number of all the arithmetic subsequences of nums.

A sequence of numbers is called arithmetic if it consists of at least three elements and if the difference between any two consecutive elements is the same.


For example, [1, 3, 5, 7, 9], [7, 7, 7, 7], and [3, -1, -5, -9] are arithmetic sequences.
For example, [1, 1, 2, 5, 7] is not an arithmetic sequence.


A subsequence of an array is a sequence that can be formed by removing some elements (possibly none) of the array.


For example, [2,5,10] is a subsequence of [1,2,1,2,4,1,5,10].


The test cases are generated so that the answer fits in 32-bit integer.

Example

Input: nums = [2,4,6,8,10]
Output: 7
Explanation: All arithmetic subsequence slices are:
[2,4,6]
[4,6,8]
[6,8,10]
[2,4,6,8]
[4,6,8,10]
[2,4,6,8,10]
[2,6,10]

Leetcode-cn.com 2021-09-12
🟡 678.valid-parenthesis-string

🏷️ Tags
#stack #greedy #string #dynamic_programming

Description
给定一个只包含三种字符的字符串：（ ，） 和 *，写一个函数来检验这个字符串是否为有效字符串。有效字符串具有如下规则：


任何左括号 ( 必须有相应的右括号 )。
任何右括号 ) 必须有相应的左括号 ( 。
左括号 ( 必须在对应的右括号之前 )。
* 可以被视为单个右括号 ) ，或单个左括号 ( ，或一个空字符串。
一个空字符串也被视为有效字符串。


Example

输入: "()"
输出: True

Leetcode.com 2021-09-11
🔴 224.basic-calculator

🏷️ Tags
#stack #recursion #math #string

Description
Given a string s representing a valid expression, implement a basic calculator to evaluate it, and return the result of the evaluation.

Note: You are not allowed to use any built-in function which evaluates strings as mathematical expressions, such as eval().

Example

Input: s = "1 + 1"
Output: 2

Leetcode-cn.com 2021-09-13
🟡 447.number-of-boomerangs

🏷️ Tags
#array #hash_table #math

Description
给定平面上 n 对 互不相同 的点 points ，其中 points[i] = [xi, yi] 。回旋镖 是由点 (i, j, k) 表示的元组 ，其中 i 和 j 之间的距离和 i 和 k 之间的距离相等（需要考虑元组的顺序）。

返回平面上所有回旋镖的数量。
 

Example

输入：points = [[0,0],[1,0],[2,0]]
输出：2
解释：两个回旋镖为 [[1,0],[0,0],[2,0]] 和 [[1,0],[2,0],[0,0]]

Leetcode.com 2021-09-12
🔴 882.reachable-nodes-in-subdivided-graph

🏷️ Tags
#graph #shortest_path #heap_priority_queue

Description
You are given an undirected graph (the "original graph") with n nodes labeled from 0 to n - 1. You decide to subdivide each edge in the graph into a chain of nodes, with the number of new nodes varying between each edge.

The graph is given as a 2D array of edges where edges[i] = [ui, vi, cnti] indicates that there is an edge between nodes ui and vi in the original graph, and cnti is the total number of new nodes that you will subdivide the edge into. Note that cnti == 0 means you will not subdivide the edge.

To subdivide the edge [ui, vi], replace it with (cnti + 1) new edges and cnti new nodes. The new nodes are x1, x2, ..., xcnti, and the new edges are [ui, x1], [x1, x2], [x2, x3], ..., [xcnti+1, xcnti], [xcnti, vi].

In this new graph, you want to know how many nodes are reachable from the node 0, where a node is reachable if the distance is maxMoves or less.

Given the original graph and maxMoves, return the number of nodes that are reachable from node 0 in the new graph.

Example

Input: edges = [[0,1,10],[0,2,1],[1,2,2]], maxMoves = 6, n = 3
Output: 13
Explanation: The edge subdivisions are shown in the image above.
The nodes that are reachable are highlighted in yellow.

Leetcode-cn.com 2021-09-14
🟡 524.longest-word-in-dictionary-through-deleting

🏷️ Tags
#array #two_pointers #string #sorting

Description
给你一个字符串 s 和一个字符串数组 dictionary 作为字典，找出并返回字典中最长的字符串，该字符串可以通过删除 s 中的某些字符得到。

如果答案不止一个，返回长度最长且字典序最小的字符串。如果答案不存在，则返回空字符串。

 

Example

输入：s = "abpcplea", dictionary = ["ale","apple","monkey","plea"]
输出："apple"

Leetcode.com 2021-09-13
🟢 1189.maximum-number-of-balloons

🏷️ Tags
#hash_table #string #counting

Description
Given a string text, you want to use the characters of text to form as many instances of the word "balloon" as possible.

You can use each character in text at most once. Return the maximum number of instances that can be formed.

Example

Input: text = "nlaebolko"
Output: 1

Leetcode-cn.com 2021-09-15
🟡 162.find-peak-element

🏷️ Tags
#array #binary_search

Description
峰值元素是指其值严格大于左右相邻值的元素。

给你一个整数数组 nums，找到峰值元素并返回其索引。数组可能包含多个峰值，在这种情况下，返回 任何一个峰值 所在位置即可。

你可以假设 nums[-1] = nums[n] = -∞ 。

你必须实现时间复杂度为 O(log n) 的算法来解决此问题。

Example

输入：nums = [1,2,3,1]
输出：2
解释：3 是峰值元素，你的函数应该返回其索引 2。

Leetcode.com 2021-09-14
🟢 917.reverse-only-letters

🏷️ Tags
#two_pointers #string

Description
Given a string s, reverse the string according to the following rules:


All the characters that are not English letters remain in the same position.
All the English letters (lowercase or uppercase) should be reversed.


Return s after reversing it.

Example

Input: s = "ab-cd"
Output: "dc-ba"

Leetcode-cn.com 2021-09-16
🔴 212.word-search-ii

🏷️ Tags
#trie #array #string #backtracking #matrix

Description
给定一个 m x n 二维字符网格 board 和一个单词（字符串）列表 words，找出所有同时在二维网格和字典中出现的单词。

单词必须按照字母顺序，通过 相邻的单元格 内的字母构成，其中“相邻”单元格是那些水平相邻或垂直相邻的单元格。同一个单元格内的字母在一个单词中不允许被重复使用。

 

Example

输入：board = [["o","a","a","n"],["e","t","a","e"],["i","h","k","r"],["i","f","l","v"]], words = ["oath","pea","eat","rain"]
输出：["eat","oath"]

Leetcode.com 2021-09-15
🟡 978.longest-turbulent-subarray

🏷️ Tags
#array #dynamic_programming #sliding_window

Description
Given an integer array arr, return the length of a maximum size turbulent subarray of arr.

A subarray is turbulent if the comparison sign flips between each adjacent pair of elements in the subarray.

More formally, a subarray [arr[i], arr[i + 1], ..., arr[j]] of arr is said to be turbulent if and only if:


For i <= k < j:


arr[k] > arr[k + 1] when k is odd, and
arr[k] < arr[k + 1] when k is even.


Or, for i <= k < j:

arr[k] > arr[k + 1] when k is even, and
arr[k] < arr[k + 1] when k is odd.




Example

Input: arr = [9,4,2,10,7,8,8,1,9]
Output: 5
Explanation: arr[1] > arr[2] < arr[3] > arr[4] < arr[5]