There is an air flow at a velocity of 1 mm/s over a cuboid which is at a temperature of 325 K. The flow is directed at 30º to the ground, assign the Boundary conditions accordingly & get the Velocity vector near inlet.

What will you learn from this tutorial?…

There is a longitudinal variation in the pipe wall temperature from 300K to 350 K . Assign the variable Pipe Wall temperature boundary condition to the pipe wall, which is the function of pipe length. Find the Temperature distribution on the pipe & rise in…

There is a cylindrical Body, made of Concrete it's temperature is 310 K, Inside the domain there are 5 Pipes made of Carbon Steel , In which there is a flow of water, at different velocities, at the bottom of the Concrete Domain there is a layer of soil &…

In this Tutorial, it has been shown ,how you could put a custom parabolic velocity profile at the inlet without using any User Defined Function (UDF) File.
For this demonstration, a 2D pipe geometry has been selected, the Geometry is been created in ANSYS…

All the basic tools in ANSYS Sketching has been shown in this tutorial. This tutorial is recommended for a beginner to understand the very basics of creating a geometry in ANSYS Design Modeler.

What will you learn from this tutorial?

How to ROTATE the Sketch…

All the basic tools in ANSYS Sketching has been shown in this tutorial. This tutorial is recommended for a beginner to understand the very basics of creating a geometry in ANSYS Design Modeler.

What would you learn from this tutorial part 2?
👉How to Add…

All the basic tools in ANSYS Sketching has been shown in this tutorial. This tutorial is recommended for a beginner to understand the very basics of creating a geometry in ANSYS Design Modeler.

What would you learn from this tutorial Part 3?
👉How to Put…

There are two concentric cylinders, which are rotating in opposite directions at the same magnitude of 20 RPS. The inner cylinder is at 305 K. whereas, the outer cylinder is at 295 K. The space between this two-cylinder is filled with Glycerine. Find out…

This is a 2D Axisymmetric laminar flow problem , recommended for ANSYS Beginners.

SIMPLE Algorithm: https://en.wikipedia.org/wiki/SIMPLE_algorithm

ANSYS Geometry (Design Modeler )
Basic Sketch Tutorial 1: https://youtu.be/KAK2LoFuv_c
Basic Sketch Tutorial…

Using the multiphase flow approach in a 3D pipe, You need to investigate the crude oil-water core annular flow through a transport pipeline.
What would you learn from this tutorial?
◾ How To Split the face of a pipe into two surfaces.
◾ Application of…

It is a rectangular channel. The bottom section is Aluminum plate with a thickness of 6mm, the top section is the water flowing over it. Heat input to the Aluminum is from the bottom wall, Heat flux=12500W/m^2. Keep the fluid velocity in such that the flow…

It's a 135 degree inclined 50 mm diameter pipe with a small opening at one face, and a large outlet. Water is entering at one end with a velocity of 2 m/s, analyse the problem using multiphase VOF modelling.

Parametric Problem tutorial:
https://www.y…

There is a conjugate heat transfer in a rectangular channel, in which there are some Rectangular protrusions aligned at an angle of 45 degrees to the flow velocity. Water enters at a velocity of 0.00835m/s & Temp of 295 K, there is a constant heat flux from…

There is a conjugate heat transfer in a rectangular channel, in which there are some Rectangular protrusions aligned at an angle of 45 degrees to the flow velocity. Water enters at a velocity of 0.00835m/s & Temp of 295 K, there is a constant heat flux from…

Its a laminar pipe flow problem, the inlet velocity profile is parabolic and the velocity variation with time is sinusoidal in nature. It has been shown, how could you put boundary conditions for such case without using any User defined function. (UDF). …

In this video, we would learn how to setup a pulsatile flow problem in ANSYS Fluent without using any UDF. What would you learn from this tutorial?

✔ In which location you need to place the file?
✔ File format of transient table data file.
✔ How to write…

DENSE DISCRETE PHASE MODELING (DDPM) PARTICLE FLOW SIMULATION
It's a 2D Geometry in which Air is flowing. The Particles are injected from a radial direction into the flow. Simulate this problem using ANSYS fluent. Find out the outlet mixture velocity after…

Analysis of Heated Rotating Rectangular Body Using ANSYS Fluent CFD Solver.

Problem Statement
There is a rectangular channel section. Which surface temperature is 310K. It is Rotating at a speed of 5 rad/s. Its kept inside a rectangular Tunnel in which…

ANSYS Tutor WhatsApp Channel. Join the Channel for ANSYS Tutorials and discussions. 0 followers