type: custom:restriction-card
card:
  type: entities
  entities:
    - entity: switch.socket2
      name: Socket 2
condition:
  entity: switch.socket2
  value: 'on'
restrictions:
  confirm:
    text: Вы уверены, что хотите выключить Socket 2?

esphome:
  name: lev-climate
  friendly_name: LEV Climate

esp8266:
  board: esp01_1m

# Enable Home Assistant API
api:
  encryption:
    key: "XXX"

# OTA для обновления прошивки
ota:
  - platform: esphome
    password: "XXX"
    
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  use_address: 192.168.1.XXX

# Подключение внешнего компонента AUX
external_components:
  - source:
      type: git
      url: https://github.com/GrKoR/esphome_aux_ac_component

# Отключаем логгер на UART, чтобы избежать конфликтов
logger:
  baud_rate: 0

# Настройка UART для связи с кондиционером
uart:
  id: ac_uart_bus
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 4800
  data_bits: 8
  parity: EVEN
  stop_bits: 1

# Настройка кондиционера
climate:
  - platform: aux_ac
    name: "Energolux SAS09M2-AI"
    id: aux_id
    uart_id: ac_uart_bus
    period: 7s
    show_action: true
    display_inverted: false
    timeout: 150
    optimistic: true
    indoor_temperature:
      name: "Внутренняя температура"
      id: ac_indoor_temp
      accuracy_decimals: 1
      internal: false
    visual:
      min_temperature: 16
      max_temperature: 32
      temperature_step: 1
    supported_modes:
      - HEAT_COOL
      - COOL
      - HEAT
      - DRY
      - FAN_ONLY
    custom_fan_modes:
      - MUTE
      - TURBO
    supported_presets:
      - SLEEP
    custom_presets:
      - CLEAN
      - HEALTH
      - ANTIFUNGUS
    supported_swing_modes:
      - VERTICAL
      - HORIZONTAL
      - BOTH

switch:
  - name: "KC868-E16S Relay 1"
    command_topic: "KC868_E16S/CC7B5C323CD4/SET"
    state_topic: "KC868_E16S/CC7B5C323CD4/STATE"
    payload_on: '{"output1":{"value":true}}'
    payload_off: '{"output1":{"value":false}}'
    state_on: true
    state_off: false
    retain: true
    value_template: '{{ value_json.output1.value }}'
...
  - name: "KC868-E16S Relay 16"
    command_topic: "KC868_E16S/CC7B5C323CD4/SET"
    state_topic: "KC868_E16S/CC7B5C323CD4/STATE"
    payload_on: '{"output16":{"value":true}}'
    payload_off: '{"output16":{"value":false}}'
    state_on: true
    state_off: false
    retain: true
    value_template: '{{ value_json.output16.value }}'

- platform: smart_thermostat
  name: WC
  unique_id: WC
  heater: switch.kc868_e16s_relay_8
  invert_heater: true
  target_sensor: sensor.0x00158d008b042783_temperature
  min_temp: 10
  max_temp: 35
  ac_mode: False
  target_temp: 26
  keep_alive:
    seconds: 60
  away_temp: 14
  kp: 50
  ki: 0.01
  kd: 2000
  pwm: 00:15:00