BSG public version changelog (9.3.160 from 2025/01/04):

- the "Focusing" section has been added to the module settings ("Manual Focus"("reset to Auto", and settings for "Near", "Far", "Infinity"), "Focusing algorithm" - "Reset focus data", "Add IDLE focus", "Delay after tap focusing", "Show focus data" to display focus data on the viewfinder screen ("AF mode", "state", "roi", "lens"), "Minimum focal length" and "Maximum focal length"(has been added to correct problems in auto / tap / manual focusing modes on some devices)).
- "Face Detect Mode"("Auto", "SIMPLE", "FULL", "EXTENDED", "NONE"). items have been added to the module settings.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

Google Camera GO (application for devices without RAW format support (HARD LEVEL cam2api - "legacy" and "limited"))


BSG public version changelog (3.8.476835377 from 2024/01/01):

- the "Configs" section has been added to the main settings modification ("Load", "Save") - saving occurs in the folder "/Download/MGCLite_CONFIG/"(file format *.mgclite (internal xml format)), loading the config is possible from any folder (to navigate through the smartphone’s file system, the built-in file manager is used).
- the item "Camera sounds" has been added to the main modification settings.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/01/11):

- the operation of AUTO-HDRPlus has been improved (it works identically to Pixels devices), the ability to adjust auxiliary frames in this mode has been added.
- added hue and saturation settings to the module settings, custom CCT - "Color correction transform" ("Custom CCT" (9 values), "Saturation fix", "WB correction" ("Offset", "Intensity"), "Saturation" ("General", "Red", "Green", "Cyan"), "Hue (in degrees)" ("General", "Red", "Green", "Cyan")) - (does not work when GAWB is on ).
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

Google Camera GO (application for devices without RAW format support (HARD LEVEL cam2api - "legacy" and "limited"))

BSG public version changelog (3.8.476835377 from 2024/01/15):

- the item "Disable logging" has been added to the main modification settings (disables writing the log file in the "Download" folder).
- in the "Modification settings" (divided into modules), in the category "For all photo modes:" the items "Disable preserving highlights" and "High light fix" have been added (activated by enabling "Additional module settings").
- the item "Maximum screen brightness" has been added to the main modification settings.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/01/18):

- a section “Correction of the noise model” has been added to the module settings with the ability to load from a file (the file must be *.c), to use the “user noise model” all 16 fields A, B, C, D must be filled in; (in the absence of values ​​or incomplete filling of the fields, the system noise model is used), the "RESET ALL USER VALUE" item to clear the USER VALUE fields, as well as the items for adjusting "Chroma" ("Scale", "Offset") and "Luma" ( "Scale", "Offset").
- the item "Max Digital Zoom" has been added to the module settings to increase the digital zoom (zoom-toggle on camera preview).
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/01/25):

- the item "Additional settings in modules" (patcher) has been added to the "Mode Configuration" section, "HDR+ (Off / Auto / Net)", "Enhanced HDR+ / Night Sight" and "RESET ALL TO DEFAULT VALUE" has been added to the "Additional settings in modules" section.
- added a "Denoise" section to "Additional module settings" (divided into "HDR+ ( Off / Auto / Net )" and "Enhanced HDR+ / Night Sight"); the following items have been added to the "Denoise" section: "Sharpen strength factor"(min\max), "Chroma strength factor"(min\max), "Luma strength factor"(min\max), "Luma revert factor"(min\max) max), "Luma outlier threshold factor"(min\max). Range of values ​​(min\max) to use depending on ISO.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/02/01):

- the item "Scene mode" has been added to the module settings (DISABLED, FACE_PRIORITY, ACTION, PORTRAIT, LANDSCAPE, NIGHT, NIGHT_PORTRAIT, THEATER, BEACH, SNOW, SUNSET, STEADYPHOTO, FIREWORKS, SPORTS, PARTY, CANDLELIGHT, BARCODE, HIGH_SPEED_VIDEO, HDR).
- in the "Advanced settings" of the module (divided into "HDR+ ( Off / Auto / Net )" and "Enhanced HDR+ / Night Sight") added section "Unsharp Mask".
- the following items have been added to the "Unsharp Mask" section: "Override sharpen polysharp sigma", "Override sharpen polysharp alpha", "Override sharpen polysharp D", "Override sharpen max detail", "Polysharp Radius small", "Polysharp Radius med", "Polysharp Radius large".
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/02/08):

- in the "Advanced settings" of the module (divided into "HDR+ ( Off / Auto / Net )" and "Enhanced HDR+ / Night Sight") added: the item "Dehaze strength factor".
- in the section "Additional settings in modules" the section "All modes" (for all modes) has been added.
- in the "Additional settings" of the module, in the "All modes" section (for all modes), the items "RAW16 Fix", "Skip Metadata Check" and "Disable Preserving Highlights" have been added.
- in the "Additional settings" of the module, in the "HDR+ ( Off / Auto / Net )" section, the item "High light Fix Zsl" have been added.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/02/15):

- in the "Additional settings" of the module, in the "HDR+ ( Off / Auto / Net )" section, the item "Disable Discard Dissimilar Frames", "Disable dropping with low Score" and "Disable dropping with TET Mismatch" has been added.
- "High light fix 1", "High light fix 2" and "Lut noise fix" items have been added to the "All modes" (for all modes) section.
- in the "Additional settings" of the module (divided into "HDR+ ( Off / Auto / Net )" and "Enhanced HDR+ / Night Sight"), the "Denoise" section added items "Shot Noise Factor" and "Rejected Denoise Multiplier".
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/02/22):

- in the main modification settings, in the "Video" category, the "Optical video stabilization" and "Use custom profiles" items have been added, the "Video stabilization" item has been renamed to "Electronic video stabilization".
- when activating the "Use custom profiles" item in the module settings, the "Custom video profile" ("Audio Bit Rate", "Audio Channels", "Audio Codec", "Audio Sample Rate", "File Format", "Video Bit Rate", "Video Codec", "Video Codec Profile", "Video Codec Level", "Video Frame Rate") section is added to the "Video" category.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/03/01):

- in the module settings, in the "Video" category, in the "Custom video profile" section, the "Google Video profile" category and the Use Continuous Auto Focus On During Recording"(Default/on/off), "Preview Throttle Fps"(Default/on/off), "Thermal Throttle Fps"(Default/on/off), "Should Unlock AfAe With Scene Change"(Default/on/off), "Should Detect Face"(Default/on/off), "Use Llv"(Default/on/off), "Use Media Codec"(Default/on/off), "Should Support Speech Mode"(Default/on/off), "Viewfinder Effect Enabled"(Default/on/off) items have been added.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/03/08):

- the following items have been added to the general menu: "LongPress on the Gallery icon" (calling up a window with "Additional settings" (patcher) of the active module) and "LongPress on the active module icon" (calling up a window with the active module settings).
- in the "Additional settings" of the module (for all modes) the items "Black Point (-0.5 .. 0.75)", "White Point (-1 .. 1.5)" and the item "Contrast 2" (range - min \ max, for applying the value depending on ISO) have been added.
- in the module settings, in the "Noise model correction" section, the "Dynamic noise factor" item has been added (works with "User Noise Model").
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/03/15):

- in the "Additional settings" of the module (for all modes), the "Sabre Param" section has been added and the following items have been added: "Fix denoise", "Denoise Gradient Threshold", "Detail" and "Better Color" (min \ max) (range - min \ max, for applying the value depending on ISO).
- in the "Additional settings" of the module (for all modes) the menu sections "Processing Param" -> "ISO \ Exposure" have been added and in it the item "Darken light" (min \ max) has been added to apply the value depending on ISO.
- in the "Additional settings" of the module (for all modes) in the "ISO \ Exposure" section, "Exposure darker 1" (min \ max) and "Exposure darker 2" (min \ max) have been added to apply the value depending on the ISO.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/03/22):

- in the "Additional settings" of the module (for all modes), "Sharp Tuning"("L1", "Radius L1", "Details L1", "L2", "Radius L2", "Details L2", "L3", "Radius L3", "Details L3", "L4", "Radius L4", "Details L4", "L5", "Radius L5", "Details L5", "L6", "Radius L6", "Details L6", "L7", "Radius L7", "Details L7", "L8", "Radius L8", "Details L8", "L9", "Radius L9", "Details L9", "L10", "Radius L10", "Details L10", "L11", "Radius L11", "Details L11", "L12", "Radius L12", "Details L12", "L13", "Radius L13", "Details L13", "L14", "Radius L14", "Details L14", "L15", "Radius L15", "Details L15", "L16", "Radius L16", "Details L16", "L17", "Radius L17", "Details L17", "L18", "Radius L18", "Details L18") has been added to the "Sabre Param" section.
- "Lighting" items have been added to the "Additional settings" of the module (for all modes).
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/03/29):

- the "HEX Editor" category (list "Patching *.so" and section "Data for editor"("Address", "Value (8 characters)")) has been added to the main modification settings for direct editing of the selected library at application startup (does not depend on the module and operating mode), the number of fields is not limited (to delete the "Address / Value" category, both fields should be left empty; when filling in at least one field of the "Address / Value" category, the next empty category is automatically added).
- in the "Additional settings" of the module (for all modes) the items "Black Point (-0.5 .. 0.75)", "White Point (-1 .. 1.5)" have been changed to ranges (min \ max, for applying values ​​depending on ISO).
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/04/05):

- the "Tone" section and items ("Tone 0", "Tone 1", "Tone 2", "Tone 3", "Tone 4", "Tone 5", "Tone 6", "Tone 7", "Tone 8", "Tone 9", "Tone 10", "Tone 11", "Tone 12", "Tone 13", "Tone 14", "Tone 15", "Tone 16") have been added to the "Additional settings" of the module (for all modes).
- in the "Additional settings" of the module (for all modes) the item "Apply Portrait Matting", the item "Portrait use opencl depth" and the item "Portrait relighting option" have been added.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/04/12):

- the "Gamma" section ("Gamma 0", "Gamma 1", "Gamma 2", "Gamma 3", "Gamma 4", "Gamma 5", "Gamma 6", "Gamma 7", "Gamma 8", "Gamma 9", "Gamma 10", "Gamma 11", "Gamma 12", "Gamma 13", "Gamma 14", "Gamma 15", "Gamma 16", "Gamma 17", "Gamma 18", "Gamma 19", "Gamma 20", "Gamma 21", "Gamma 22", "Gamma 23", "Gamma 24", "Gamma 25", "Gamma 26", "Gamma 27", "Gamma 28", "Gamma 29", "Gamma 30", "Gamma 31", "Gamma 32") has been added to the "Additional settings" of the module (for all modes).
- in the module's "Additional Settings" (for all modes), "Underexposure" has been added under the "Processing Param" section.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/04/19):

- in the "Additional settings" of the module (for all modes) the "Sect" section has been added ("Sect 0", "Sect 1", "Sect 2", "Sect 3", "Sect 4", "Sect 5", "Sect 6").
- in the "Additional settings" of the module (divided into "HDR+ (Off / Auto / Net)" and "Enhanced HDR+ / Night Sight") section "Denoise" the items "Noise reduction adjust A", "Noise reduction adjust B (reverse)", "Noise reduction adjust C" have been added.
- in the "Additional settings" of the "All modes" module (for all modes), the "Brigthtness" (min \ max) item has been added to the "Sabre Param" section.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/04/26):

- in the "Additional settings" of the module (for all modes) the section "Color Factor" ("0 (white offset A)", "1 (white offset B)", "2 (white offset C)", "3 (-Yellow / +Blue)", "3 (-Blue / +Yellow)", "4 (-Yellow / +Blue,Purple)", "5 (-Green / +Red,Orange)", "6 (-Orange, Red / +Green,Blue)").
- the section "Wiener MERGE method" ("Merge temporal strength" and "Merge spatial strength") has been added to the "Additional settings" of the module (for all modes).
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG

BSG public version changelog (9.3.160 from 2025/05/03):

- in the "Additional settings" of the module (for all modes), the "Luma Denoise" section has been added to the section "Sabre Param" ("Low" (L1, L1A, L1B, L2, L2A, L2B, L3, L3A, L3B, L4, L4A, L4B, L5, L5A), "Medium" (L1, L1A, L1B, L2, L2A, L2B, L3, L3A, L3B, L4, L4A, L4B, L5, L5A), "High" (L1, L1A, L1B, L2, L2A, L2B, L3, L3A, L3B, L4, L4A, L4B, L5, L5A)).
- in the "Additional settings" of the module (for all modes), the "Ultradepth force" item has been added to the "Processing Param" section.
- fixed errors found in the modification's operation.
- fixed operation on some devices.

modification discussion group: PublicGroup_MGC_BSG