Xiaomi 15 Ultra XML & LIB

💎 Name: LMC Jeus v171
📸 GCAM version: LMC8.4 R18f1 mod
🧑‍🔧 GCAM Dev: Hasli
🧑‍🔧 XML and LIB Dev: @JeusChrit

Make sure to use this XML with the APK mod.

Instructions:
- Download and install the modified LMC R18 apk from this post.
- If you already have the standard LMC installed, it is required to uninstall it and replace it with this one.
- Download the ZIP file from this post and extract it's contents to /LMC8.4 (if you see NOISE MODELLER and AWB folders in /LMC8.4, delete those first.)
- Open LMC, grant all permissions and select a config for your device

#JeusChrit
@XiaomiUltraCam

🛠 Mod Tile Manager 4.1.9
👨‍🏭 @JohnTheFarm3r

Mod Tile Manager is for everyone who’s tired of fiddling with scripts, manual camera mod installs, or reading helpful guides that you might not understand.

Just import, tap, and enjoy live camera modding without reboots or hassle.

#Alex
@XiaomiUltraCam

Xiaomi 15 Ultra XML

💎 JOQZ LMC 8.3 and 8.4
🧑‍🔧 GCAM Dev: Hasli
🧑‍🔧 XML Dev: @Joqzz

Port tests from Oppo X6 Pro

Many thanks to Joqz for the time setting up the lenses for 15U and evaluating some samples.

Keep in mind Joqz don't own the device and that the XMLs are test versions.

Main changes:
- Remade 8.4 xml yet again for this specific apk purpose, corrected tones more on both xmls to match each other
- Added clarity default for 8.4 so it will make small difference in black
- Gallery button works for ZSL frames, selfie button for HDR+e frames
- Limited HDR+e HDR on 8.4
- No need to load noise model on 8.4 anymore

Notes:
- If you want 50 frames, change interface to pixel 3 on lmc8.4, with 2 xl limit is around 40
- Some hard scenes might need quick frame swap as i run less denoise.

Put the XML on the folder /storage/emulated/0/LMC8.4/

Have fun and share samples for possible improvements.

#JOQZ
@XiaomiUltraCam

Xiaomi 15 Ultra MOD

💎 HP9 ISZ FPS MOD
🧑‍🔧 Dev: @GeorgeKiarie

This mod will allow you to use the fps settings to change the ISZ on HP9 sensor.

How to use:
4080x3072
30fps = normal 99mm
48fps = 2x ISZ crop from 50mp
50fps = 4x ISZ crop from 200mp

Working on Motioncam, mcpro24fps, Photon, ...
Recommended the usage of Motioncam due to its raw capabilities.

Tested on EUXM 2.0.207.0-3.0.3.0

Install with Alex MOD Tile Manager available on Tools menu.

#George
@XiaomiUltraCam

Xiaomi 15 Ultra MOD

💎 Full resolution MOD HOS3
🧑‍🔧 Dev: @GeorgeKiarie

Full Resolution MOD to be used on 3rd party apps.
It's not intended to work on stock, it will crash.

Tested on EUXM HOS 3.0.3.0-3.0.7.0

Install with Alex MOD Tile Manager available on Tools menu.

This MOD took a tremendous effort and time to make it happen, please consider in supporting the developer!

#George
@XiaomiUltraCam

Xiaomi 15 Ultra MOD

💎 Fix10BitHEVCEncoding
🧑‍🔧 Dev: @JohnTheFarm3r

This mod will fix the old Xiaomi encoder issues that limited HVEC 10bits Motioncam Direct Log video footage to seconds/minutes before starting dropping frames.

Tested on EUXM 3.0.3.0-3.0.7.0

Install as a module on your root manager.

#Alex
@XiaomiUltraCam

Video/Photo Tool

💎 UNMCRAWESOME
🧑‍🔧 Dev: @JohnTheFarm3r

UNMCRAWESOME - MCRAW Viewer & Exporter for Android

What is this app?

Unmcrawesome lets you view, edit, and export MotionCam Pro MCRAW (RAW video) files directly on your Android device. You can play back your RAW footage, apply color grading adjustments, and export to standard video formats like H.264, HEVC, or ProRes.

Frame Picker - Export Photos from Video

You can also use the Frame Picker to select any frame from your MCRAW video, apply color grading edits, and export it as a high-quality photo. This is useful for extracting stills from your RAW video footage.

#Alex
@XiaomiUltraCam

Xiaomi 15 Ultra MOD

💎 Full resolution MOD HOS3
🧑‍🔧 Dev: @GeorgeKiarie

Shoot at full 50MP resolution on your favourite third-party camera apps.

Tested on EUXM 3.0.9.0

#George
@XiaomiUltraCam

🛠 Mod Tile Manager
👨‍🏭 @JohnTheFarm3r

Mod Tile Manager is for everyone who’s tired of fiddling with scripts, manual camera mod installs, or reading helpful guides that you might not understand.

Just import, tap, and enjoy live camera modding without reboots or hassle.

#Alex
@XiaomiUltraCam

🛠 Odmisk
👨‍🏭 @JohnTheFarm3r

Odmisk is an alternative Magisk fork with added /odm partition support for module mounting and overlays. It keeps the Magisk workflow you already know, while extending compatibility for devices and setups that need /odm partition handling, for various camera mods, or even non-camera mods (modules).

Source and releases:
https://github.com/EkinStrop/Magisk_odm

#Alex
@XiaomiUltraCam

🛠 Maximum brightness
🛠 Battery capacity
🛠 Combo module
👨‍🏭 @JohnTheFarm3r

Max brightness: Ideal for outside when sun is shinning heavily and not for long periods. Use at your own risk.

Battery capacity: Report the correct battery capacity on the Chinese Xiaomi 17 Ultra running the EUXM ROM.

Combo: Same module as the two posted earlier, but it combines both.

#Alex
@XiaomiUltraCam

MejikLabs — Device Monitoring, Mirroring & Thermal Control for Android
By @JohnTheFarm3r

📊 Dashboard
🌡 Thermal Profiles
⚙️ Config Editor
📈 Temp Monitor
📱 Screen Mirroring
🌐 Remote Monitor
🔥 Thermald Control
🔔 Overlays & Alerts
💾 Storage I/O

⚡ Early Access — bugs may occur, device support expanding gradually
Root required for thermal features · Works on most Android for monitoring & mirroring

#Alex
@XiaomiUltraCam

📸 GCAM MOD - Rifanda Release
LMC8.3PG-R1_X300-V3 · Based on LMC 8.3 mod by xenius9
By @rifandaadam

Originally built for the Vivo X300 (no XML needed there), it was ported to Xiaomi 15 Ultra and Xiaomi 17 Ultra with a custom XML.

✅ Key Features
• 📦 Clone install — no conflict with existing GCam packages
• 🔭 Teleconverter supported
• 🎯 Focus range pre-configured
• 🌙 Noise Model Coefficient 0.1–0.4
→ Too noisy at night? Increase the coefficient
(⚠️ higher values may introduce motion artifacts)

🎨 JWB Use Case
• JWB On → Eye-catching, punchy colors
• JWB Off → Accurate, natural colors

⚙️ Xiaomi Setup — XML required
The APK runs natively on Vivo X300. For Xiaomi devices, a custom XML port is needed to make it work — load the matching one for your device.

If System CCT looks washed out → select a CCT preset in Settings.

Big thanks to Rifanda - a true master of GCam and geliosoft. Thank you for sharing this with the community!

#Rifanda
@XiaomiUltraCam

⚡ FastEnough - ADB File Transfer Tool
👤 Dev: @JohnTheFarm3r

Tired of MTP being slow and unreliable?

FastEnough uses ADB over a custom TCP server to transfer files between your PC and Android device - fast, stable, and resumable.

✅ Pause & resume transfers (even after USB/WiFi drops)
✅ CRC integrity check on every file
✅ Works over USB and WiFi
✅ No more MTP headaches

#Alex
@XiaomiUltraCam

Raw ViewerDroid
Dev: @GeorgeKiarie

Raw ViewerDroid is a GPU-accelerated RAW processor for Android with a full on-device ISP pipeline tuned for LYT-900 and HP9 sensors.

Open your DNG/RAW files, process them in real time and export - demosaic, white balance, colour matrix, and colour space transform all running on the GPU.

Includes 6 classic film stock simulations (Portra 400, Portra 160, Ektar 100, Gold 200, Pro 400H, Vision3 500T), a split-screen A/B compare mode, and a SAVE function to export your processed result.

No cloud, no compression, full pipeline on-device.

#George
@XiaomiUltraRaw

Xiaomi 17 Ultra XML

J0qZ XML - LMC 8.3 & LMC 8.4

Two separate XML configs by J0qZ, one for each LMC version - ported from the OPPO Find X6 Pro, originally adapted through the Xiaomi 15 Ultra.

XMLs based on J83 and J84 version X.

J0qZ's configs are built around lib-level tuning: highlights, shadows, fine detail and signal-to-noise are his core focus areas.

⚙️ Installation
Drop the XML into the matching folder, load XML as described on the link below:
• LMC 8.3 → /storage/emulated/0/LMC8.3/
• LMC 8.4 → /storage/emulated/0/LMC8.4/

#JOQZ
@XiaomiUltraCam

Xiaomi 15 Ultra XML

📦 @javasabr v3 - BSG GCam 9.6v29

✅ What's new
1. Updated black levels to have more accurate colors in shadows
2. Updated count of frames to merge for ZSL and NS modes
3. Updated colors/white balance
4. Updated dehaze and contrast settings
5. Updated settings related to handling motion

⚙️ How to install
Download & install the APK
Extract the config archive to any folder
Open GCam → Settings → Configs → Load → select the file

#javasabr
@XiaomiUltraCam

🚀 MejikLabs by @JohnTheFarm3r
📡 WiFi 7 · 6 GHz · 320 MHz Hotspot - Xiaomi 17 Ultra

No Android OEM currently supports a 6 GHz hotspot. MejikLabs unlocks it - WiFi 7 at 320 MHz channel width, delivering up to 5 Gbps over the air. Faster than USB, wirelessly.

Your phone stays connected to home WiFi while simultaneously acting as an access point on a separate 6 GHz channel. Perfect for FTP transfers and any app that can leverage fast local WiFi.

⚡ One-tap start/stop with live status - frequency, channel width, connected clients, IP
🔗 Simultaneous home WiFi + hotspot - no internet sacrifice
📦 LSPosed 320 MHz module installer included - enable, reboot, done

Requires Root + LSPosed · Xiaomi 17 Ultra

Features from previous version maintained

📊 Dashboard
🌡 Thermal Profiles
⚙️ Config Editor
📈 Temp Monitor
📱 Screen Mirroring
🌐 Remote Monitor
🔥 Thermald Control
🔔 Overlays & Alerts
💾 Storage I/O

#Alex
@XiaomiUltraCam

🔴 Leica M9 Cloud Processing - Unlocked

Big one.
Community member Fred (@freddyy85) figured it out - M9 Essential cloud processing (50MP result) now works on xiaomi.eu ROM on normal 17 Ultra.

Requirements:
Magisk + LSPosed + 3 files from the package

Installation and details inside the zip.

Tested on version 3.0.304.0

#Fred
@XiaomiUltraCam

📸 Xiaomi 17 Ultra: Native 14-bit DCG RAW on both cameras, no root required!

You can now capture true 14-bit DCG RAW files on both the main and periscope cameras using MotionCam Pro, no root needed!

Black / White Levels - Custom (both cameras)

Black: 1024 / 1024 / 1024 / 1024
White: 16383

Main Camera (OVX10500)

 ID: 0/2 - 24mm
Resolution: 4096x3072 (RAW SENSOR, 1.33)
Custom Vendor Overrides - Add Tag
Tag: org.codeaurora.qcamera3.sensor_meta_data.current_mode
Type: Request i32
Value: 4

Periscope (Samsung HPE 200MP)

 ID: 0/4 - 78mm
Resolution: 4080x3072 (RAW SENSOR, 1.33)
Custom Vendor Overrides - Add Tag
Tag: org.codeaurora.qcamera3.sensor_meta_data.current_mode
Type: Request i32
Value: 6

These vendor tags activate DCG mode on each sensor, unlocking full 14-bit dual conversion gain capture through a standard Camera2 API call. No Magisk, no modules, no root.

Thanks @jeneeeek99 for identifying the vendor tag.