CNC LASER CONTROL BOARD
- This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable
- Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable;
- One-piece integrated drive
- PWM output frequency 10kHz, higher engraving precision and clearer details
Y-axis dual drive, stronger drive capability;
- Supports USB automatic identification, when plugged in USB and connected to the computer
- 5V power output port, and software controllable, easy to expand various functions;
- Supports USB flash firmware, firmware upgrade is more convenient;
- XY limit switch interface each
- Self-contained laser anti-burn mode
Price 6500 birr

Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase

CNC ROUTER BITS
Price of 3 Flute 12mm*75mm*75L*12D bit 5500 birr
Price of 1/4*3/8 bit 1500 birr
Price of 4*22*45 bit 950 birr
Price of 5*22*50 bit 1500 birr
Price of 6*22*48 bit 1300 birr
Price of 8*25*60 bit 3500 birr
Price of 60v 1/2*7/16 bit 2800 birr
Price of 3.175*22*42 bit 850 birr

Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
www.vector4engineering.com

🎄🎄🎄 Merry Christmas. Wishing you all the best Holiday. 🎄🎄🎄🎄 🎄 መልካም ገና www.vector4engineering.com

New Chrome Round Bars(Rods)
- 10mm,12 mm and 16mm diameters
- 2.1m long Chrome Round Bars/Rods
- Used for CNC, 3D and Industrial Systems.
Price of 10mm Rod 2.1m long 5500 birr
Price of 12mm Rod 2.1m long 7500 birr
Price of 16mm Rod 2.1m long 9500 birr

Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

2m long LINEAR RAIL 20mm
- High-speed operation
- Low friction and noise
- High precision, duration, and reliability
- Smooth movement
- High efficiency of transferring
- No gap and preloading
- For 3D Printers, CNC machines, Advanced Industrial Systems etc… Package Includes
2 meter Rail – 1
HGH20CA Bearing block – 2
Price 17000 birr

Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/0922787347 Kase
VECTOR FOUR ENGINEERING
www.vector4engineering.com

IDLER PULLEY 625ZZ
- Solid Derlin V-slot Wheel Idler Pulley is compatible with Creality Ender 3, CR-10 / CR-10S / CR-10 S4 / CR-10 S5 and similar 3D printers.
- Material: POM/Derlin/black nylon
- Outer diameter: 24mm
- Inner diameter: 5 mm
- Height: 11 mm
- Weight: 12g
- Simple structure, light weight, easy installation, smooth movement, low noise level, high print quality.
Price 500 Birr

Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/0922787347 Kase
VECTOR FOUR ENGINEERING
www.vector4engineering.com

Nozzle 0.4mm
- Brass nozzle 0.4mm for Ender 3/Ender 3 Pro/Ender V2
- Brass nozzle 0.4mm for Creality CR-10S PRO v1 & v2
Price 500 birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

LASER MACHINE 80W 3 IN 1
- Machine Model: Cloud L10
- Laser Power 80W
- Current: 1.7A
- Laser tube: 2xLD + FAC + C-Lens
- Laser length: 445nm ± 5nm
- Beam shape: Spot (fixed focus)
- Operating voltage: DC 24V
- Focus: 0.08*0.08mm
- PWM/TTL Input: 0-5V
- Input interface: XH2.54-3Pin (+,-, PWM/TTL)
- TTL output power: >1K HZ = continuous power x 40%
- Working frequency:<30KHz
- Laser Power 80W
- Engraving Speed 0-8000mm/min
- Graphic Format Supported jpg/svg/G-code
- Working Area 100cm*100cm
- Software Laser GRBL/Lightburn(Paid)/MKSLaser
- Support System Computer/Phone
- Supported Formats NC ,JPG, BMP, PNG, DXF
- Applicable Material Acrylic, Crytal, Leather, MDF, Metal, Paper, Plastic, Plexiglass, Plywood, Rubber, Stone, Wood
Package Includes
- Laser Machine Cloud 80W L10 CNC 1M*1M, air pump with 4 axis Controller
- Z axis
- Rotation axis
Price 200,000 Birr
https://vector4engineering.com/product/laser-machine-80w-3-in-1/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector

Push Button Square Head
- OMRON B3F-4055 Switch Square Head Momentary Push Button Switch 12x12x7.3mm 4P 4Pin On Off Switch
- Mounting Through Hole THT
- Button Color Green, Yellow, Red and Blue
- Height 7.3 mm
- Construction form Horizontal
- Poles 1
- Rated voltage 24 VDC
- Test voltage 500 VAC
- Rated current 50 mA
- Switching type Momentary Function
- Contact material Ag
- Width 12 mm
- Length 12 mm
- Actuation force 2.55N
Price 120 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

FGH40N60 IGBT
- Product Category: IGBT Transistors
- Configuration: Single
- Low Saturation Voltage: VCE(sat) = 2.3 V @ IC = 40 A
- Type: NPN
- Collector to Emitter Voltage: 600V
- Gate to Emitter Voltage: 20V
- Transient Gate−to−Emitter Voltage: 30V
- Continuous Collector Current at 25C: 120 A
- Power Dissipation: 160W-290W
- Mounting Style: Through Hole
- Maximum Operating Temperature: 150C
- Minimum Operating Temperature: –55C
Price 400 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

NE555 Pulse Frequency Duty Cycle Adjustable Module
- Main chip: NE555
- Input Voltage: 5V-15V DC.
- Generates an adjustable pulse for MCU.
- Generates an adjustable pulse, to control circuitry associated.
- NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator is 5V square wave signal generator. It generates a square wave signal used for experimental development. Also, use to drive a stepper motor for generating a square wave drive signal.
- The output duty cycle can fine-tune. Duty cycle and frequency is not separately adjustable, adjusting the duty cycle will change the frequency.
Price 500 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

E3D PT100 Temperature Sensor
- PT100’s are high temperature, high accuracy temperature sensors
- PT100’s are able to measure higher temperatures than thermistors – upto 400°C
- More accurate than both thermistors and thermocouples in general
- PT100 sensors are also very easy to handle
Price 750 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

MAX9814 Microphone Amplifier
- MAX9814 Microphone Amplifier AGC Auto Gain Control
- Supply Voltage: 2.7v-5.5v @ 3mA current
- Output: 2Vpp on 1.25V bias
- Frequency Response: 20Hz – 20 KHz
- Programmable Attack and Release Ratio
- Automatic gain, selectable max from 40dB, 50dB or 60dB
- The chip MAX9814 has a few options you can configure with the breakout. The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by connecting the Gain pin to VCC or ground. You can also change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500. The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input
Price 1250 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

DS3240 40KG HIGH TORQUE SERVO MOTOR
- DS3240 PRO 40KG HIGH TORQUE SERVO MOTOR WATERPROOF METAL GEAR
- Operating Voltage: 4.8 ~ 6.8V DC
- Torque Digital Servo Stall Torque (5V): 39.5 kg/cm (263.8oz/in)
- Stall Torque (6.8V): 34.5kg/cm (298.5 oz/in)
- Speed : 0.2 sec/60°(5V) / 0.17 sec/60°(6.8V)
- Signal Dead Band: 3μs
- Gear Type: Copper & Aluminum
- Working frequency: 1520μs / 333hz
- CNC aluminum middle Shell for IP66 Protection from Water & Dust
- Dual ball bearings for smooth operation and long life
- High-performance digital standard servo offers higher accuracy compared to standard servos
- High-precision metal gears with hard anodizing for high-torque applications
Price 5500 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
www.vector4engineering.com

2.2KW ER20 Air cooled Spindle Motor kit
- Model Number: JFG-F2.2KW
- Power: 2.2KW
- Current: 8A
- Voltage: 220
- Application: Milling
- Maximum Torque: 50Nm
- Operating Speed: 24000rpm
- Cooling: Air cooling
- Joint of nose: ER20
- 400Hz
ER25 COLLET SET
- 13 pieces ER32 Collet Set for CNC Router Sizes from 1/8mm to 13mm
- Gripping Range: 1/8mm, 1/8mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm and 12mm
Price 95000 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/2-2kw-spindle-motor-kit/

3.5KW ER32 Air cooled Spindle Motor kit
- Model Number: JFG-F3.5KW
- Power: 3.5KW
- Current: 15A
- Voltage: 220
- Application: Milling
- Maximum Torque: 50Nm
- Operating Speed: 18000rpm
- Cooling: Air cooling
- Joint of nose: ER25
- 300Hz
ER25 COLLET SET
- 13 pieces ER32 Collet Set for CNC Router Sizes from 3mm to 15mm
- Gripping Range: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm and 15mm
Price 110000 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/3-5kw-er25-air-cooled-spindle-motor-kit/

4.5KW ER32 Air cooled Spindle Motor kit
- Model Number: JFG-F4.5KW
- Power: 4.5KW
- Current: 16.2A
- Voltage: 220
- Application: Milling
- Maximum Torque: 50Nm
- Operating Speed: 18000rpm
- Cooling: Air cooling
- Joint of nose: ER32
ER32 COLLET SET
- 13 pieces ER32 Collet Set for CNC Router Sizes from 3mm to 15mm
- Gripping Range: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm and 15mm
Price 125000 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/4-5kw-air-cooled-spindle-motor/

LASER RECEIVER MODULE
- LASER RECEIVER SENSOR MODULE NON-MODULATOR
- Voltage : 5v
- Output high level when it receives laser signal
- Output low level when it doesn't receive laser signal
- Size : 1.5cm x 1.9cm
- The laser receiver sensor module uses a non-modulated laser receiver to detect the laser signal.
- For use indoors where there is no light, sunlight or other sources of light which will interfere with the sensor, recommended for use in dark environments.
Price 400 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/laser-receiver-module/

Optical Dust Sensor GP2Y1010AU0F
- Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cigarette smoke
- Low power consumption, analog voltage output, the output level is linear with dust density
- Embedded voltage boost circuit to support wide range of power supply
- Sensitivity : 0.5V/(100μg/m3)
- Measurement range : 500μg/m3
- Power : 2.5V~5.5V
- Operating current : 20mA(max)
- Dimension : 63.2mm×41.3mm×21.1mm
- Mounting holes size : 2.0mm
- Air hole size : 9.0mm
Price 1500 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/optical-dust-sensor-gp2y1010au0f/

Proximity Sensor SN04-N
- SN04-N NPN NO 4mm (Distance Detector) The Proximity Sensor detects the presence of a metal object within 4mm. It has a DC supply voltage of 10-30V.
- OUTPUT NPN, NO
- Distance 4mm
- Working Voltage 10-30VDC
- Response Frequency 500Hz max
- Indicator Type Red LED
- Size 36 x 18 x 18mm
- Cable Length 110cm
Price 1250 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/proximity-sensor-sn04-n/

4 Digit LED Display Board
- With adjustable LED brightness and clock point, can display decimals, letters, etc.
- In addition to the 4-Digit 7-segments, the module has a ‘colon’ at the center which makes it very easy to create clock or time-based projects.
- The driver IC is TM1637, compatible with Arduino.
- The digital display tube can be controlled with only two signal lines, simple and easy to use.
- Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.
Price 400 Birr
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
https://vector4engineering.com/product/led-display-board/