FGH60N60 IGBT
- IGBT is a bipolar transistor with an insulated gate terminal. Are suitable for high-voltage, high-current applications.
- Are widely used as switching devices in the inverter circuit (for DC-to-AC conversion) for driving small to large motors. Used in home appliances such as air conditioners and refrigerators, industrial motors, and automotive main motor controllers to improve their efficiency.
- FGH60N60 IGBT
- Product Category: IGBT Transistors
- RoHS: RoHS Compliant Details
- Configuration: Single
- Collector- Emitter Voltage VCEO Max: 600 V
- Maximum Gate Emitter Voltage: +/- 20 V
- Continuous Collector Current at 25 C: 120 A
- Mounting Style: Through Hole
- Maximum Operating Temperature: + 150 C
- Minimum Operating Temperature: – 55 C
Price 400 Birr
https://vector4engineering.com/product/fgh60n60-igbt/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
- IGBT is a bipolar transistor with an insulated gate terminal. Are suitable for high-voltage, high-current applications.
- Are widely used as switching devices in the inverter circuit (for DC-to-AC conversion) for driving small to large motors. Used in home appliances such as air conditioners and refrigerators, industrial motors, and automotive main motor controllers to improve their efficiency.
- FGH60N60 IGBT
- Product Category: IGBT Transistors
- RoHS: RoHS Compliant Details
- Configuration: Single
- Collector- Emitter Voltage VCEO Max: 600 V
- Maximum Gate Emitter Voltage: +/- 20 V
- Continuous Collector Current at 25 C: 120 A
- Mounting Style: Through Hole
- Maximum Operating Temperature: + 150 C
- Minimum Operating Temperature: – 55 C
Price 400 Birr
https://vector4engineering.com/product/fgh60n60-igbt/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
ADXL345 ACCELEROMETER
- It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
- 3V-6V DC Supply Voltage
- On-board LDO Voltage regulator
- Built-in Voltage level convertor (MOSFET based)
- It can be interface with 3.3V or 5V Microcontroller.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- SPI and I2C interfaces
- Measuring Range: ±16g
- Measuring Values (-16g to +16g):
- X: -235 to +270
- Y: -240 to +260
- Z: -240 to +270
Price 1500 Birr
https://vector4engineering.com/product/adxl345/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
- 3V-6V DC Supply Voltage
- On-board LDO Voltage regulator
- Built-in Voltage level convertor (MOSFET based)
- It can be interface with 3.3V or 5V Microcontroller.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- SPI and I2C interfaces
- Measuring Range: ±16g
- Measuring Values (-16g to +16g):
- X: -235 to +270
- Y: -240 to +260
- Z: -240 to +270
Price 1500 Birr
https://vector4engineering.com/product/adxl345/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
PN532 NFC RFID MODULE
- PN532 is a highly integrated transceiver module for contactless communication at 13.56 MHz based on the 80C51 microcontroller core supporting different card and reader/writer operating modes.
- Operating voltage: +2.7V to +5.5V
- Supports II2, SPI, and high-speed UART (HSU)
- Built-in PCB antenna (covered by white paint)
- 5 to 7cm communication distance
- On-board level shifter
- Standard 5-V TTL for I2C/UART and 3.3-V TTL SPI (VCC 3.3 to 5 V)
- Works as an RFID reader/writer
- Works as a 1443-A card or a virtual card
- Supports NFC with Android phone
RFID reader/writer mode support for:
- Mifare 1K, 4K, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, - CD light, DesFire, and P5CN072 (SMX)
- Innovision Jewel cards such as the IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
Price 1250 Birr
https://vector4engineering.com/product/pn532-nfc-rfid-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
- PN532 is a highly integrated transceiver module for contactless communication at 13.56 MHz based on the 80C51 microcontroller core supporting different card and reader/writer operating modes.
- Operating voltage: +2.7V to +5.5V
- Supports II2, SPI, and high-speed UART (HSU)
- Built-in PCB antenna (covered by white paint)
- 5 to 7cm communication distance
- On-board level shifter
- Standard 5-V TTL for I2C/UART and 3.3-V TTL SPI (VCC 3.3 to 5 V)
- Works as an RFID reader/writer
- Works as a 1443-A card or a virtual card
- Supports NFC with Android phone
RFID reader/writer mode support for:
- Mifare 1K, 4K, Ultralight, and DesFire cards
- ISO/IEC 14443-4 cards such as CD97BX, - CD light, DesFire, and P5CN072 (SMX)
- Innovision Jewel cards such as the IRT5001 card
- FeliCa cards such as RCS_860 and RCS_854
Price 1250 Birr
https://vector4engineering.com/product/pn532-nfc-rfid-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
HIGH VOLTAGE GENERATOR
- DC 3V‑6V to 1000kV 1000000V Boost Step‑Up Power Module High Voltage Transformer
- Input voltage: DC 3 V to 6 V
- Input current: 2A – 5A
- High pressure type: the type of pulse current
- Output voltage: 1000000v(Please pay attention to safety)
- High pressure discharge distance between: 10 mm – 20 mm
- The output high voltage wire length: 100 mm
- Input power cord length: 100 mm (the red line is positive)
- Wiring:Red and green power connection red line:”+” green line “-“
output: the other side ,same color cable
Price 1500 Birr
https://vector4engineering.com/product/high-voltage-generator/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- DC 3V‑6V to 1000kV 1000000V Boost Step‑Up Power Module High Voltage Transformer
- Input voltage: DC 3 V to 6 V
- Input current: 2A – 5A
- High pressure type: the type of pulse current
- Output voltage: 1000000v(Please pay attention to safety)
- High pressure discharge distance between: 10 mm – 20 mm
- The output high voltage wire length: 100 mm
- Input power cord length: 100 mm (the red line is positive)
- Wiring:Red and green power connection red line:”+” green line “-“
output: the other side ,same color cable
Price 1500 Birr
https://vector4engineering.com/product/high-voltage-generator/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
ARDUINO SPEAKER MODULE
- Potentiometer manually adjusts the volume, left-handed volume increases.
- Speaker Power: 0.5W/8Ω
- Speaker Diameter: 29.3mm
- Power Amplifier Chip: NS8002
- Voltage: 2-5V
- Port: Digital
- Platform: Arduino, MCU
- Size: 36.5*44mm
- Fixing Hole: 3mm
- Note: This is an audio amplification module, not MP3! Can’t save music! Can’t insert TF card! Arduino output signal is required to play music!
Price 1,750 Birr
https://vector4engineering.com/product/arduino-speaker-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Potentiometer manually adjusts the volume, left-handed volume increases.
- Speaker Power: 0.5W/8Ω
- Speaker Diameter: 29.3mm
- Power Amplifier Chip: NS8002
- Voltage: 2-5V
- Port: Digital
- Platform: Arduino, MCU
- Size: 36.5*44mm
- Fixing Hole: 3mm
- Note: This is an audio amplification module, not MP3! Can’t save music! Can’t insert TF card! Arduino output signal is required to play music!
Price 1,750 Birr
https://vector4engineering.com/product/arduino-speaker-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
3D PLA FILAMENTs
- 1.75mm PLA 3D printer filament.
- Multiple colors are avaliable
- White,Black,Red,Grey, Silver, Sky Blue,Golden,orange, yellow, emerald green and transparent
- It is not easy to break, offering clog-free, bubble-free, and tangle-free printing.
- The Ender PLA printer filament is controlled 1.75mm within ±0.03mm. So that the feeding is smoother and the material is not easily broken to ensure continuous printing.
- Recommended Extrusion/Nozzle Temperature 195°C – 220°C, Bed 55°C – 60°C for better printing results.
Price 6500 Birr
https://vector4engineering.com/product/3d-filament-ender-series/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/0922787347 Kase
VECTOR FOUR ENGINEERING
- 1.75mm PLA 3D printer filament.
- Multiple colors are avaliable
- White,Black,Red,Grey, Silver, Sky Blue,Golden,orange, yellow, emerald green and transparent
- It is not easy to break, offering clog-free, bubble-free, and tangle-free printing.
- The Ender PLA printer filament is controlled 1.75mm within ±0.03mm. So that the feeding is smoother and the material is not easily broken to ensure continuous printing.
- Recommended Extrusion/Nozzle Temperature 195°C – 220°C, Bed 55°C – 60°C for better printing results.
Price 6500 Birr
https://vector4engineering.com/product/3d-filament-ender-series/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/0922787347 Kase
VECTOR FOUR ENGINEERING
CO2 LASER LENS
- Material: Hight class CVD Znse material (US II-VI)
- Diameter: 25mm
- Focal Length:63.5mm
- Thickness:3mm
- Transmittance: ≥99.5%
- Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.
- It’s good for 40W/50W/80W/100W/130W/150W/200W,max 500W CO2 laser 10600nm 10.6um.
- It can be used for CO2 laser engraving and cutting well.
Price 4500 Birr
https://vector4engineering.com/product/co2-laser-lens/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Material: Hight class CVD Znse material (US II-VI)
- Diameter: 25mm
- Focal Length:63.5mm
- Thickness:3mm
- Transmittance: ≥99.5%
- Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.
- It’s good for 40W/50W/80W/100W/130W/150W/200W,max 500W CO2 laser 10600nm 10.6um.
- It can be used for CO2 laser engraving and cutting well.
Price 4500 Birr
https://vector4engineering.com/product/co2-laser-lens/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
REFLECTIVE MIRROR 30mm
- Mateial: Molybdenum
- Diameter: 30mm
- Thickness: 3mm
- This optical element is used for planar reflecting the laser beam and is an important component of the laser system.
- Molybdenum mirror is normally polished, without coating, used for tough environments.
- It has extremely tough surface.
Price 2500 Birr
https://vector4engineering.com/product/reflective-mirror-30mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Mateial: Molybdenum
- Diameter: 30mm
- Thickness: 3mm
- This optical element is used for planar reflecting the laser beam and is an important component of the laser system.
- Molybdenum mirror is normally polished, without coating, used for tough environments.
- It has extremely tough surface.
Price 2500 Birr
https://vector4engineering.com/product/reflective-mirror-30mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
CO2 LASER POWER SUPPLY 150W
- Usage/Application Laser Machine
- Model Name/Number HY-W150
- Co2 HY-W150 Laser Power Supply For 150w Laser Tube for Laser Machine
Price 65000Birr
https://vector4engineering.com/product/co2-laser-power-supply-150w/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Usage/Application Laser Machine
- Model Name/Number HY-W150
- Co2 HY-W150 Laser Power Supply For 150w Laser Tube for Laser Machine
Price 65000Birr
https://vector4engineering.com/product/co2-laser-power-supply-150w/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
TEMPERATURE CONTROLLER YYW-2 0-1024℃
- YYW-2 0-1024℃ Temperature Sensor Temperature Control Relay Detection High Temperature Serial Output with K Type Thermocouple 30A
- Input supply voltage: DC 7 ~ 30V universal
- Output controllable power: DC / AC within 30A
- Probe model: K-type thermocouple Wire length 0.5m
- Resolution: 1 degree
- Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.
- Can turn off the display for a long time, reducing power consumption
- Synchronous data acquisition serial output
- Screw head specifications: M6
- It has 7 modes of opertation
Price 3500 Birr
https://vector4engineering.com/product/yyw-2/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- YYW-2 0-1024℃ Temperature Sensor Temperature Control Relay Detection High Temperature Serial Output with K Type Thermocouple 30A
- Input supply voltage: DC 7 ~ 30V universal
- Output controllable power: DC / AC within 30A
- Probe model: K-type thermocouple Wire length 0.5m
- Resolution: 1 degree
- Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.
- Can turn off the display for a long time, reducing power consumption
- Synchronous data acquisition serial output
- Screw head specifications: M6
- It has 7 modes of opertation
Price 3500 Birr
https://vector4engineering.com/product/yyw-2/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
Brand New NEMA 17 STEPPER MOTOR 60Ncm
- Status: New
- Model: 17HS24-0644S
- Motor Type: Bipolar Stepper
- Hybride type
- Step Angle: 1.8 deg
- Holding Torque: 60Ncm
- Rated Current/phase: 0.64A
- Phase Resistance: 15ohms
- Inductance: 32mH ± 20%(1KHz)
- Frame Size: 42 x 42mm
- Body Length: 60mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead(wire) Length: 500mm
- Weight: 500g
Price 4500 Birr
https://vector4engineering.com/product/stepper-motor-60ncm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Status: New
- Model: 17HS24-0644S
- Motor Type: Bipolar Stepper
- Hybride type
- Step Angle: 1.8 deg
- Holding Torque: 60Ncm
- Rated Current/phase: 0.64A
- Phase Resistance: 15ohms
- Inductance: 32mH ± 20%(1KHz)
- Frame Size: 42 x 42mm
- Body Length: 60mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead(wire) Length: 500mm
- Weight: 500g
Price 4500 Birr
https://vector4engineering.com/product/stepper-motor-60ncm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
NEMA 23 BIPOLAR 3Nm STEPPER MOTOR
- Status: New
- Rated Voltage: 5.88V
- Type: Hybrid
- Step Angle: 1.8 deg
- Holding Torque: 3.0 Nm
- Rated Current/phase: 4.2 A
- Phase Resistance: 0.9 ohms± 10%
- Inductance: 3.8 mH ± 20%(1KHz)
- Frame Size: 57 x 57 mm
- Body Length: 120 mm
- Shaft Diameter: Φ8 mm
- Shaft Length: 20 mm
- D-cut Shaft Length: 20 mm
- Number of wires: 4
- Wire Length: 400 mm
- Weight: 1.8kg
- Rotor Inertia: 800g.cm2
- Phase: 2
- Phase Resistance: 1.4Ω
- Lead Wire: 4
- Motor Length: 112mm
Price 15500 Birr
https://vector4engineering.com/product/nema-23-stepper/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Status: New
- Rated Voltage: 5.88V
- Type: Hybrid
- Step Angle: 1.8 deg
- Holding Torque: 3.0 Nm
- Rated Current/phase: 4.2 A
- Phase Resistance: 0.9 ohms± 10%
- Inductance: 3.8 mH ± 20%(1KHz)
- Frame Size: 57 x 57 mm
- Body Length: 120 mm
- Shaft Diameter: Φ8 mm
- Shaft Length: 20 mm
- D-cut Shaft Length: 20 mm
- Number of wires: 4
- Wire Length: 400 mm
- Weight: 1.8kg
- Rotor Inertia: 800g.cm2
- Phase: 2
- Phase Resistance: 1.4Ω
- Lead Wire: 4
- Motor Length: 112mm
Price 15500 Birr
https://vector4engineering.com/product/nema-23-stepper/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
GT5 IDLER
- Bore diameter 8mm
- Idler’s internal width 14.75mm
- Idler’s external width 20.15mm
Price 950 Birr
https://vector4engineering.com/product/gt5-idler/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Bore diameter 8mm
- Idler’s internal width 14.75mm
- Idler’s external width 20.15mm
Price 950 Birr
https://vector4engineering.com/product/gt5-idler/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
IMAX B6 V2 BATTERY CHARGER
- SKYRC IMAX B6 Digital RC Lipo NiMh Battery Balance Charger With AC POWER 12v 5A Adapter
- Material: Aluminium
- DC Input Voltage: 11-18V
- Display Type: 16*2 LCD
- Controls: 4 Buttons
- External Port: 1-6s Balance Socket-XH, Temperature Probe Socket, Battery Socket, DC Input
- Battery Cutoff Temperature: 20°C/68°F-80°C/176°F(adjustable)
- Balance Current: 300mA/cell
- Reading Voltage Range: 0.1-26.1V/cell
- Battery Types/Cells: LiPo/LiHV/LiFe/Lilon: 1-6cells, NiMH/NiCd: 1-15cells, Pb: 2-20V
- Battery Capacity Range: NiMH/NiCd: 100-50000mAh, LiPo/LiHV/LiFe/Lilon: 100-50000mAh, Pb: 100-50000mAh
- Safety Timer: 1-720minutes off
- Charge Wattage: 60W
- Charge Current: 6A
- Discharge Current: 0.1A-2.0A
- Discharge Wattage: 5W
- Balance Cells: 2-6 cells
- Memory: 10 different charge/discharge profiles
Price 12500 Birr
https://vector4engineering.com/product/imax-b6-v2-charger/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
- SKYRC IMAX B6 Digital RC Lipo NiMh Battery Balance Charger With AC POWER 12v 5A Adapter
- Material: Aluminium
- DC Input Voltage: 11-18V
- Display Type: 16*2 LCD
- Controls: 4 Buttons
- External Port: 1-6s Balance Socket-XH, Temperature Probe Socket, Battery Socket, DC Input
- Battery Cutoff Temperature: 20°C/68°F-80°C/176°F(adjustable)
- Balance Current: 300mA/cell
- Reading Voltage Range: 0.1-26.1V/cell
- Battery Types/Cells: LiPo/LiHV/LiFe/Lilon: 1-6cells, NiMH/NiCd: 1-15cells, Pb: 2-20V
- Battery Capacity Range: NiMH/NiCd: 100-50000mAh, LiPo/LiHV/LiFe/Lilon: 100-50000mAh, Pb: 100-50000mAh
- Safety Timer: 1-720minutes off
- Charge Wattage: 60W
- Charge Current: 6A
- Discharge Current: 0.1A-2.0A
- Discharge Wattage: 5W
- Balance Cells: 2-6 cells
- Memory: 10 different charge/discharge profiles
Price 12500 Birr
https://vector4engineering.com/product/imax-b6-v2-charger/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase
👍1
CHARGING HUB SKYRC G630
- SKYRC G630 Charging Hub Charging Management System Paired PC1080 Charger for UAV/Agricultural Drone Batteries 6 in 1
- Smart Charging Management System for UAV/ Agricultural Drone Batteries Paired with PC1080C G630 can detect the remaining capacity of the batteries connected, and it will automatically charge the one with higher capacity first. Which improves working efficiency.It also has input& output reverse
- Model: G630
- BATTERY TYPE: LiPo/ LiHV 6S XT90 Connector
- MAXIMUM CURRENT: 30A
- BATTERY PACK COUNT: 1-6 Packs
- PAIRED CHARGER: PC1080C
- Size: 263x78x32mm
Price 18500 Birr
https://vector4engineering.com/product/charging-hub-skyrc-g630/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- SKYRC G630 Charging Hub Charging Management System Paired PC1080 Charger for UAV/Agricultural Drone Batteries 6 in 1
- Smart Charging Management System for UAV/ Agricultural Drone Batteries Paired with PC1080C G630 can detect the remaining capacity of the batteries connected, and it will automatically charge the one with higher capacity first. Which improves working efficiency.It also has input& output reverse
- Model: G630
- BATTERY TYPE: LiPo/ LiHV 6S XT90 Connector
- MAXIMUM CURRENT: 30A
- BATTERY PACK COUNT: 1-6 Packs
- PAIRED CHARGER: PC1080C
- Size: 263x78x32mm
Price 18500 Birr
https://vector4engineering.com/product/charging-hub-skyrc-g630/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
CARBON FIBER PROPELLER
- T-Motor Carbon Fiber Propeller P12*2 prop(2PCS)/1 PAIR
- For Brushless Motors Copters match U3
- Model Number : P12*4
- Dimesnions : P12*4 (304.8mm*101.6mm)
- Material : Carbon Fiber (CF+Epoxy)
- Optimum RPM : 5000-9000 RPM
- Thrust limitation : 4Kg
- T-Motor series: 2 blades separated
- Weight : 14.5g (for single blade)
Package includes
- 1* ClockwiseT-Motor Carbon Fiber Propeller P12
- 1* Counter Clockwise T-Motor Carbon Fiber Propeller P12
Price 3500 Birr
https://vector4engineering.com/product/carbon-fiber-propeller/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- T-Motor Carbon Fiber Propeller P12*2 prop(2PCS)/1 PAIR
- For Brushless Motors Copters match U3
- Model Number : P12*4
- Dimesnions : P12*4 (304.8mm*101.6mm)
- Material : Carbon Fiber (CF+Epoxy)
- Optimum RPM : 5000-9000 RPM
- Thrust limitation : 4Kg
- T-Motor series: 2 blades separated
- Weight : 14.5g (for single blade)
Package includes
- 1* ClockwiseT-Motor Carbon Fiber Propeller P12
- 1* Counter Clockwise T-Motor Carbon Fiber Propeller P12
Price 3500 Birr
https://vector4engineering.com/product/carbon-fiber-propeller/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
GRBL 4 AXIS STEPPER MOTOR CONTROLLER
- Product Name: 4 Axis 3.0 Control Board
- Product Specifications: 4 Axis
- Product Size: 122mm*87mm
- Product Weight: 150g
- Operating System: Window/Linux/Mac
- Interface Type: Type C
- Supply Voltage: DC24V- 5A
- Software Support: Candle/LaserGRBL/LightBurn/USG
Price 11500 Birr
https://vector4engineering.com/product/grbl-4-axis-controller/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Product Name: 4 Axis 3.0 Control Board
- Product Specifications: 4 Axis
- Product Size: 122mm*87mm
- Product Weight: 150g
- Operating System: Window/Linux/Mac
- Interface Type: Type C
- Supply Voltage: DC24V- 5A
- Software Support: Candle/LaserGRBL/LightBurn/USG
Price 11500 Birr
https://vector4engineering.com/product/grbl-4-axis-controller/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
40W LASER MODULE
- XH2.54-3P socket
- Power: Up to 40W
- Wavelength: 450nm
- Luminous color: blue
- Input voltage: DC12V
- Power: 3.2A(3-3.5A)
- Frequency: 0-20KHz
- Cooling method: Air cooled
- Material: Aluminum alloy+Copper
- Optical system: Optical degree quartz lens group
- Customized laser protect case(effective filter laser protects eyes)
- It can connected to air pump to achieve better cutting effect
Package Includes
- 40W Laser Module
- Wrench
- Protective shell
- Air pump connector
Price 21500 Birr
https://vector4engineering.com/product/40w-laser-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- XH2.54-3P socket
- Power: Up to 40W
- Wavelength: 450nm
- Luminous color: blue
- Input voltage: DC12V
- Power: 3.2A(3-3.5A)
- Frequency: 0-20KHz
- Cooling method: Air cooled
- Material: Aluminum alloy+Copper
- Optical system: Optical degree quartz lens group
- Customized laser protect case(effective filter laser protects eyes)
- It can connected to air pump to achieve better cutting effect
Package Includes
- 40W Laser Module
- Wrench
- Protective shell
- Air pump connector
Price 21500 Birr
https://vector4engineering.com/product/40w-laser-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
SHRINK TUBE 3mm
- 3mm Heat shrink tube
- Color Black
- Tube Shrinks to half the original diameter when exposed to heat
Price 150 birr per meter
https://vector4engineering.com/product/shrink-tube-3mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- 3mm Heat shrink tube
- Color Black
- Tube Shrinks to half the original diameter when exposed to heat
Price 150 birr per meter
https://vector4engineering.com/product/shrink-tube-3mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
POWER SUPPLY 24V/5A
- Brand new
- Input voltage 110VAC or 220VAC
- Dimension: 200mm*100mm*44mm(L*W*H)
Price 4500 Birr
https://vector4engineering.com/product/power-supply-24v-5a/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Brand new
- Input voltage 110VAC or 220VAC
- Dimension: 200mm*100mm*44mm(L*W*H)
Price 4500 Birr
https://vector4engineering.com/product/power-supply-24v-5a/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
CO2 LASER LENS 20mm
- Material: Hight class CVD Znse material (US II-VI)
- Diameter: 20mm
- Focal Length: 50.8mm
- Thickness: 2.5mm
- Transmittance: ≥99.5%
- Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.
- It’s good for 40W/50W/80W/100W/130W/150W/200W,max 500W CO2 laser 10600nm 10.6um.
- It can be used for CO2 laser engraving and cutting well.
Price 4950Birr
https://vector4engineering.com/product/co2-laser-lens-20mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING
- Material: Hight class CVD Znse material (US II-VI)
- Diameter: 20mm
- Focal Length: 50.8mm
- Thickness: 2.5mm
- Transmittance: ≥99.5%
- Double-sided solid coating,Wiping resistant,Extended durability,Precision slicing polishing and grinding processes,High temperature laser resistance,Excellent optical properties,High working efficiency.
- It’s good for 40W/50W/80W/100W/130W/150W/200W,max 500W CO2 laser 10600nm 10.6um.
- It can be used for CO2 laser engraving and cutting well.
Price 4950Birr
https://vector4engineering.com/product/co2-laser-lens-20mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING