POWER SUPPLY 12V/30A

- Output 12V/30A
- Input 200-240VAC/4A or 100-120VAC/7A
Price 12500 birr
https://vector4engineering.com/product/power-supply-12v-30a/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

PNEUMATIC VALVE
- Type: 5/2 Way Internally Piloted Acting Type Single Solenoid Valve
- Model: 4V210-08
- AC220V LED Light
- Port Size: 1/4″ BSPT
- Effective area: 16mm2
- Working pressure range: 1.5-8Kgf/cm2
- Proof pressure: 1.5MPa
- Operating temperature range:-20~70℃
- Working Voltage Range: ±15%
- Power consumption: 3.5VA
- Insulation and protection: Class F.IP65
- Max.Working Frequency: 5times/s
- Response time: 0.05s
- Size(LxWxH): approx.118x64x23mm
Price 6500 birr
https://vector4engineering.com/product/pneumatic-valve-2/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

POWER SUPPLY 24V/30A
- Adjustable variable output
- Output 24V/30A
- Input 200-240VAC/8.6A
Price 12500 birr
https://vector4engineering.com/product/power-supply-24v-30a/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

5V 30A RELAY
- Model Number: SLA-05VDC-SL-A
- Type: Electromagnetic Relay
- Coil Voltage: 5V DC
- Current: 30A AC/DC
- No. of Pins: 5
- Contact Rating: 30A 250VAC/30VDC
- Contact Rating: 1HP 120VAC- 1/2HP 240VAC
Price 350 birr
https://vector4engineering.com/product/5v-30a-relay/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

ICM7211
- ICM7211 Four Digit Display Decoder/Drivers
- Directly Drives Four Digit, 7 Segment Displays
- Non-multiplexed Liquid Crystal Display (LCD)
- No external components needed
- Display Type:Static
- Interface: 4-Bit Parallel
- Output Format: 7 segments
- Fonts: Hexadecimal
- Segment Blinking: No
- VSUPPLY (V) (min): 3
- VSUPPLY (V) (max): 6
Price 450 birr
https://vector4engineering.com/product/icm7211/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

IRFZ44N
- N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25°C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is ±20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Rise time and fall time is about 60ns and 45ns respectively.
- It is commonly used with Arduino, due to its low threshold current.
Price 100 Birr
https://vector4engineering.com/product/power-mosfets/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

LM741 OP-AMP IC
- LM741 has only one op-amp inside
- The internal circuitry is designed to stay stable at different temperatures.
- It can be operated with both single and dual supply.
- High gain
- Provided with short circuit and overload protection.
- Low power consumption.
- Large common mode rejection ratio (CMRR) and differential voltage ranges.
- No external frequency compensation is required.
- Prevent from latch-up when common-mode range is exceeded.
- Operating temperature should be -50 to 125 ˚C.
- Supply current – 1.7 to 2.8mA.
- It is direct replacement for lm201, MC1439, 748.
Price 50 Birr
https://vector4engineering.com/product/lm741/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

CREALITY CR-10 SMART PRO 3D PRINTER
- Molding technology: FDM
- Build volume: 300x300x400mm
- Maximum Bed Temperature 100 °C
- Nozzle temperature: maximum 300°C
- Nozzle diameter: 0.4mm
- Layer height: 0.1-0.35mm
- Resolution ~0.1 mm
- Camera: AI camera
- Extrusion type: direct drive
- Display: 4.3inch HD full viewing angle screen
- Print Sheet: Spring Steel PEI magnetic sheet
- Touch scree: capacitive multi-touch screen
- Print medium: SD card/wi-fi/network
- Network connection: wi-fi/bluetooth/RJ45
- Rated power: 350W
- Power requirement: input 110-240 VAC, output 24VDC
- supports PLA/ABS/TPU/PETG/wood high temperature PA /Carbon Fiber filaments
- File Support: STL/ OBJ/ AMF
- Filaments diameter: 1.75mm
- Slicing software: Creality Slicer/Cura
- Nozzle material: Cromium Ziconium Copper
Price 150,000 Birr
https://vector4engineering.com/product/cr-10-smart-pro/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector

CNC ROUTER BIT 3.175mm
- CNC Router Bit Milling Cutter
- 3.175*2*17mm
Price 750 Birr per unit
https://vector4engineering.com/product/cnc-router-bit-3-175/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

CNC ROUTER BIT 4mm
- CNC Router Bit Milling Cutter
- 4*4*32mm
Price 1500 Birr
https://vector4engineering.com/product/cnc-router-bit-4mm/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

MICRO HDMI TO HDMI CABLE
- The 1.15m long cable connects tablets and smartphones with Micro HDMI port to HDTV or computer monitor with HDMI port for video and audio streaming.
- Type D to Type A
- Delivers both high-definition video (up to 4K Resolution @30Hz) and uncompressed multichannel digital audio
- Built-in Ethernet and Audio Return, supports 3D television functionality
Price 950 birr
https://vector4engineering.com/product/micro-hdmi-cable/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

SOIL MOISTURE SENSOR
- Operating Voltage: 3.3V to 5V DC
- Operating Current: 15mA
- Output Digital – 0V to 5V, Adjustable trigger level from preset
- Output Analog – 0V to 5V based on infrared radiation from fire flame falling on the sensor
- LEDs indicating output and power
- PCB Size: 3.2cm x 1.4cm
- LM393 based design
- Easy to use with Microcontrollers or even with normal Digital/Analog IC
- It measures the volumetric content of water inside the soil and gives us the moisture level as output.
Price 750 Birr
https://vector4engineering.com/product/soil-moisture-sensor/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0983902995 Vector/ 0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING

S3003 SERVO MOTOR
- Model: Futaba S3003
- Dead Band: 0.100 ms
- Control System: +Pulse Width Control
- Working Frequence: 20ms period / 50hz (Analog Control)
- (RX) Required Pulse: 3.0 ~ 5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8 ~ 6 V DC Volts
- Operating Speed (4.8v): 0.200 sec/60° degrees at no load
- Operating Speed (6v): 0.160 sec/60° degrees at no load
- Stall Torque (4.8v): 9.4kg/cm
- Stall Torque (6v): 11kg/cm
- Motor Type: Brushed Motor
- Potentiometer Drive: Direct Drive
- Gear Type: Plastic Gears
- Case Material: Plastic
- Connector Wire Length: 32.0cm
- Dimensions: 40.7×19.7×42.9mm
- Weight: 37 grams
Price 1,300 birr
https://vector4engineering.com/product/s3003-servo-motor/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

የክረምት ጊዜዎን በVector4Robotics  በማሳለፍ የአዲስ እውቀት ባለቤት ይሁኑ::
✍️ ልምድ ባላቸው  መምህራን  የሚሰጥ ልዩ class ።
✍️ በዘርፉ  በልዩነት ና በበላይነት ስልጠና የመስጠት የካበተ ልምድ።
✍️  የተግባር ልምምድ በዘመናዊ ወርክሾፕ ።
✅ ✅ ✅ 3 እና ከዛ በላይ ሆነዉ ለሚመጡ 20% ቅናሽ።


📍 በምዝገባ ላይ እንገኛለን።
https://t.me/vector4robotics
🏢 መገናኛ ዘፍመሽ ሞል 3ኛ ፎቅ ቢሮ ቁጥር 301

☎️  09 33 78 68 05
       09 93 80 29 95
       09 22 78 73 47 www.vector4engineering.com

PTFE TEFLON TUBE
- PTFE Tube for J-Head Hotend Bowden Extruder 1.75mm Filament 3D Printer Accessories Remote Nozzle Feeding Tube Teflon Hose
- Specifications: 2x4mm (inner diameter 2mm; outer diameter 4mm)
- Length: 50 cm
- Color: Blue
- Temperature Range: -190 degrees Celsius to 280 degrees Celsius
Price 350 birr per half a meter
https://vector4engineering.com/product/ptfe-teflon-tube/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

RACK AND PINION 1.25MOD
- 1.25 mod 22mm*25mm straight rack length 1400mm
- Model specifications: 1.25 mod
- 1.4m long
Price 19500 birr
https://vector4engineering.com/product/rack-1-25mod/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

E38S6G5-400B-G24N ROTARY ENCODER
- Output: NPN open collector output circuit
- Power Supply: 5 ~ 24VDC
- Encoder Type: Incremental
- The response frequency is 0-100KHz
- Current Consumption: ≤40 mA
- Maximum Speed: 5000 RPM
- Pulse Per Revolution (PPR): 400
- Counts Per Revolution (CPR): 1600
- Output Phase: AB
- Protection Standard: IP52
- Shaft Type: D-type Solid
- Encoder Type: Optical
- Stainless Steel Shaft
- Anti-jamming Performance
- 2-Phase precise Output Readings
- Shaft Length (mm): 12
- Shaft Diameter (mm): 6
- Mounting Hole(mm): M3
- Cable Length: 1.5 ~ 2 Meter
- Incremental rotary encoder internal adopts ASIC devices
Price 3000 birr
https://vector4engineering.com/product/rotary-encoder-2/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

NEMA 34 12.5N.M CLOSED LOOP
Working voltage: AC 20-70V OR DC 30-100V
- Height: 118mm
- Shaft length: 32mm
- Shaft diameter: 14mm
- Current: 6A
- Torque: 12.5N.m
- Communication mode: RS322 serial port and Debug panel Phase connection.
- Low heating / high efficiency
- Smooth and accurate (space vector current control algorithm based on feedback encoder and vector smoothing filtering technology) has a good resistance to the low frequency resonance of traditional stepper motor;
- High speed response (advanced servo control technology provides powerful torque output, so that the system has very high dynamic response, stepping servo speed up to 600-2000RPM);
Price 29,500 birr
https://vector4engineering.com/product/closed-loop-stepper-motor/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase

BRUSHLESS MOTOR 2814 1400KV
- Commutation: Brushless
- Construction: Permanent Magnet
- KV: 1400KV
- Supports: 3S, 4S
- max thrust: 2020g (4S)
- Weight: Approx 115g
- Size: Approx 2.8*2.8*1.4cm(L * W * H)
- Motor 2814-1400KV with HY 1060 propeller Blade 12.4V(3S) 30A(max Current) reaches 1430g thrust
- Motor 2814-1400KV with HY 1060 propeller Blade 14.8V(4S) 38A(max Current) reaches 1900g thrust
- Motor 2814-1400KV with HY 1160 propeller Blade 12.4V(3S) 34A(max Current) reaches 1570g thrust
- Motor 2814-1400KV with HY 1160 propeller Blade 14.8V(3S) 43A(max Current) reaches 2020g thrust
Price 3000 birr
https://vector4engineering.com/product/brushless-motor-1400kv/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING

XT60 FEMALE CONNECTOR WIRE 10cm
- XT60 Female Connector With 14AWG Silicon Wire 10cm
- Designed for heavy-duty and high Power Application
- Metal Material: Brass
- Connector Type: XT60 Female
- Material of Connector: High-Temp nylon
- Cable color: Black & Red
- Constant Current capacity: 60A
- Rated Temperature: 105°c
- Rated Voltage: 600V
- Cable Size: 14 AWG
- Length of Cable: 100 mm
Price 250 birr
https://vector4engineering.com/product/xt60-connector/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0993802995 Vector/ 0922787347 Kase/0924488599 Haben
VECTOR FOUR ENGINEERING