Vector Four Enginnering/Arduino Shop/ Electronics Supermarket
HC-05 BLUETOOTH MODULE - The HC-05 is a popular bluetooth module which can add two-way (full-duplex) wireless functionality to your projects. - The HC-05 has two operating modes, one is the Data mode in which it can send and receive data from other Bluetooth…
HC-05 BLUETOOTH MODULE
Price 850 Birr
https://vector4engineering.com/product/hc-05-bluetooth-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
Price 850 Birr
https://vector4engineering.com/product/hc-05-bluetooth-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
ESP32 CAM WIFI + BLUETOOTH CAMERA MODULE
- DC 5V Dual-core Wireless with OV2640 Camera TF Card Module
- Current: 2A
- Dimensions: 2.7x4cm/1.06×1.57inch
WITH OV2640 CAMERA
- Low-power dual-core 32-bit CPU for application processors.
- Supports OV2640 and OV7670 cameras, built-in flash
- Supports TF card
- Supports image WiFi upload
ESP32-CAM WIFI BLUETOOTH BOARD
- Main frequency up to 240MHz, computing power up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRA
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Supports multiple sleep modes
- Embedded Lwip and Free RTOS
- Support STA/AP/STA+AP working mode
- Supports Smart Config/AirKiss one-click distribution network.
- Supports secondary development
Price 2,000 Birr
https://vector4engineering.com/product/esp32-cam/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
VECTOR FOUR ENGINEERING
- DC 5V Dual-core Wireless with OV2640 Camera TF Card Module
- Current: 2A
- Dimensions: 2.7x4cm/1.06×1.57inch
WITH OV2640 CAMERA
- Low-power dual-core 32-bit CPU for application processors.
- Supports OV2640 and OV7670 cameras, built-in flash
- Supports TF card
- Supports image WiFi upload
ESP32-CAM WIFI BLUETOOTH BOARD
- Main frequency up to 240MHz, computing power up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRA
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Supports multiple sleep modes
- Embedded Lwip and Free RTOS
- Support STA/AP/STA+AP working mode
- Supports Smart Config/AirKiss one-click distribution network.
- Supports secondary development
Price 2,000 Birr
https://vector4engineering.com/product/esp32-cam/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
VECTOR FOUR ENGINEERING
4A STEPPER MOTOR DRIVER
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- H bridge bipolar constant current drive.
- I/P: 9-42VDC Micro step
- You can set its micro step and output current with 6 DIP switch.
- There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
Price 2500 Birr
https://vector4engineering.com/product/4a-driver/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- H bridge bipolar constant current drive.
- I/P: 9-42VDC Micro step
- You can set its micro step and output current with 6 DIP switch.
- There are 7 kinds of micro steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability. As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.
Price 2500 Birr
https://vector4engineering.com/product/4a-driver/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
GRBL CNC SHIELD
- 4 Axis Arduino CNC shield
- GRBL 0.8c compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Spindle enable and direction
- Coolant enable
- Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- This PCB is perfect if you want to assemble your first CNC low cost machine such as a laser cutter, using an Arduino Uno.
- It is totally compatible with the popular GRBL firmware.
- It supports up to 4 motors with A4988 or DRV8825 drivers.
Price 1500 Birr
https://vector4engineering.com/product/cnc-shield/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
- 4 Axis Arduino CNC shield
- GRBL 0.8c compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Spindle enable and direction
- Coolant enable
- Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- This PCB is perfect if you want to assemble your first CNC low cost machine such as a laser cutter, using an Arduino Uno.
- It is totally compatible with the popular GRBL firmware.
- It supports up to 4 motors with A4988 or DRV8825 drivers.
Price 1500 Birr
https://vector4engineering.com/product/cnc-shield/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
5A STEPPER MOTOR DRIVER
-Stepper Motor Driver Controller 0.2-5A CNC Router HY-DIV268N-5A 12-48V.
- Average current control, two-phase sinusoidal current output.
- DC 12~48V power supply, the internal integration of 12V and 5V regulator.
- Optically isolated signal input/output
Protection against overvoltage, undervoltage, overcurrent and short circuit white
-The input current is from 1 to 5 amps, select the drive to stepper motor.
Output current 0.2A ~ 5A
- Two-phase hybrid stepper motor dynamic voltage 12 to 48V, current is less than 5A outer diameter 35 to 86mm.
- This driver uses drive current loop subdivision control, motor torque ripple is very small, low speed operation is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase motors, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery and other high-resolution requirements on the device.
Price 3000 Birr
https://vector4engineering.com/product/5a-driver/
-Stepper Motor Driver Controller 0.2-5A CNC Router HY-DIV268N-5A 12-48V.
- Average current control, two-phase sinusoidal current output.
- DC 12~48V power supply, the internal integration of 12V and 5V regulator.
- Optically isolated signal input/output
Protection against overvoltage, undervoltage, overcurrent and short circuit white
-The input current is from 1 to 5 amps, select the drive to stepper motor.
Output current 0.2A ~ 5A
- Two-phase hybrid stepper motor dynamic voltage 12 to 48V, current is less than 5A outer diameter 35 to 86mm.
- This driver uses drive current loop subdivision control, motor torque ripple is very small, low speed operation is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase motors, high positioning accuracy. Widely used in engraving machine, CNC machine tools, packaging machinery and other high-resolution requirements on the device.
Price 3000 Birr
https://vector4engineering.com/product/5a-driver/
3D PRINTER HEATBED
- PCB Heat Bed MK2B Black(with cable)
- 12V/24V Dual Power MK2B PCB Heated Bed Hot Bed For Prusa 3D Printer
- Dimensions: 214x214x0.8mm
- Color: Black
- Power Input: 12V / 24V
- Power: 120W
- Laminate FR4 1.6±0.15mm
- 2 layer, 35μm copper
- Black Soldermask – both sides
- White Silkscreen – both sides
- Technology: aluminum plate
- Copper plated holes
- Resistance: under 12V voltage, resistance 1.2 ohms; under 24V voltage, resistance 4.8 ohms
- Double-sided, without cable, heating uniformity, smooth printing .
- Borosilicate materials, high transparency.
- Heating the adhesion are good, plastic parts easily separated after cooling.
- Eliminates the trouble of replace the special plastic film, does not exist the special plastic film reduce viscosity problem.
- Suitable for Reprap machine heated circuit boards.
Price 2500 Birr
https://vector4engineering.com/product/heatbed/
- PCB Heat Bed MK2B Black(with cable)
- 12V/24V Dual Power MK2B PCB Heated Bed Hot Bed For Prusa 3D Printer
- Dimensions: 214x214x0.8mm
- Color: Black
- Power Input: 12V / 24V
- Power: 120W
- Laminate FR4 1.6±0.15mm
- 2 layer, 35μm copper
- Black Soldermask – both sides
- White Silkscreen – both sides
- Technology: aluminum plate
- Copper plated holes
- Resistance: under 12V voltage, resistance 1.2 ohms; under 24V voltage, resistance 4.8 ohms
- Double-sided, without cable, heating uniformity, smooth printing .
- Borosilicate materials, high transparency.
- Heating the adhesion are good, plastic parts easily separated after cooling.
- Eliminates the trouble of replace the special plastic film, does not exist the special plastic film reduce viscosity problem.
- Suitable for Reprap machine heated circuit boards.
Price 2500 Birr
https://vector4engineering.com/product/heatbed/
GSM SIM900A MODULE
- Dual Band 900/1800 MHz
- GPRS multi-slot class 10 / 8GPRS mobile station class B
- Complies with GSM phase 2/2 +
- Dimensions: 49 x 47 mm.
- Weight: 38 g
- Control via AT commands (GSM 07.07, 07.05 and SIMCOM enhanced AT commands)
- Supply voltage range: 5V
- Low power consumption: 1.5mA (sleep mode)
- SIM900A can search these two bands automatically.
- The frequency bands can also be set by AT Commands.
- The baud rate is configurable from 1200-115200 through AT command.
- The GSM/GPRS Modem has internal TCP/IP stack to enable you to connect with internet via GPRS.
- GPRS multi-slot class 10/8GPRS mobile station class B, compliant to GSM phase 2/2+, Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).
Price 2000 Birr
https://vector4engineering.com/product/sim900a-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase
- Dual Band 900/1800 MHz
- GPRS multi-slot class 10 / 8GPRS mobile station class B
- Complies with GSM phase 2/2 +
- Dimensions: 49 x 47 mm.
- Weight: 38 g
- Control via AT commands (GSM 07.07, 07.05 and SIMCOM enhanced AT commands)
- Supply voltage range: 5V
- Low power consumption: 1.5mA (sleep mode)
- SIM900A can search these two bands automatically.
- The frequency bands can also be set by AT Commands.
- The baud rate is configurable from 1200-115200 through AT command.
- The GSM/GPRS Modem has internal TCP/IP stack to enable you to connect with internet via GPRS.
- GPRS multi-slot class 10/8GPRS mobile station class B, compliant to GSM phase 2/2+, Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands).
Price 2000 Birr
https://vector4engineering.com/product/sim900a-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase
❤1
NODEMCU ESP8266
- NodeMCU is an open-source Lua based firmware and development board specially targeted for IoT based Applications.
- It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.
- Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 MHz
- USB-TTL based on CP2102 is included onboard, Enabling Plug and Play
- PCB Antenna
- Small Sized module to fit smartly inside your IoT projects
Price 1450 Birr
https://vector4engineering.com/product/nodemcu-esp8266/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- NodeMCU is an open-source Lua based firmware and development board specially targeted for IoT based Applications.
- It includes firmware that runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module.
- Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
- UARTs: 1
- SPIs: 1
- I2Cs: 1
- Flash Memory: 4 MB
- SRAM: 64 KB
- Clock Speed: 80 MHz
- USB-TTL based on CP2102 is included onboard, Enabling Plug and Play
- PCB Antenna
- Small Sized module to fit smartly inside your IoT projects
Price 1450 Birr
https://vector4engineering.com/product/nodemcu-esp8266/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
ESP32 WROOM WIFI BOARD+Bluetooth
ESP32 Module: ESP-WROOM-32 from Espressif.
- 2.4GHz dual core microprocessor equipped with
- 4MB SPI flash memory. Support up to 16MB of flash memory
Connectivity
- WiFi 802.11 b / g / n.
- Security WEP, WPA / WPA2 PSK / Enterprise.
- Integrated cryptographic chip supporting AES / SHA2 / Elliptical Curve Cryptography / RSA-4096 algorithms
- Maximum power for data transfer: 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
- Sensitivity max. reception: -97 dBm
- Bluetooth 4.0 LE
32 Inputs / Outputs
- 26x Digital I / O (3.3V). All outputs can be PWM
- 18x analog inputs
- 3x UART
- 3x SPI
- 2x I2S
- 2x DAC
- 2x I2C
Integrated sensors
- Hall Effect
- 10x inputs for capacitive touch interface
Sleep Mode Consumption: 5 μA
Price 2000 Birr
https://vector4engineering.com/product/esp-32/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase
ESP32 Module: ESP-WROOM-32 from Espressif.
- 2.4GHz dual core microprocessor equipped with
- 4MB SPI flash memory. Support up to 16MB of flash memory
Connectivity
- WiFi 802.11 b / g / n.
- Security WEP, WPA / WPA2 PSK / Enterprise.
- Integrated cryptographic chip supporting AES / SHA2 / Elliptical Curve Cryptography / RSA-4096 algorithms
- Maximum power for data transfer: 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
- Sensitivity max. reception: -97 dBm
- Bluetooth 4.0 LE
32 Inputs / Outputs
- 26x Digital I / O (3.3V). All outputs can be PWM
- 18x analog inputs
- 3x UART
- 3x SPI
- 2x I2S
- 2x DAC
- 2x I2C
Integrated sensors
- Hall Effect
- 10x inputs for capacitive touch interface
Sleep Mode Consumption: 5 μA
Price 2000 Birr
https://vector4engineering.com/product/esp-32/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase
❤1
0.96 INCH OLED MODULE
- It supports many chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Resolution: 128 x 64;
- View angle: more than 160 degree;
- Support voltage: 3.3V-5V DC;
- Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded driver IC: SSD1306;
- Communication: I2C/IIC Interface, only need 2 I/O ports;
- Compatible with MMDVM, Pi-Star
- Self-luminous: needn’t backlight, the display can self-luminous;
- It has high contrast, bright and crisp dots, even tiny fonts quite readable
- About fonts: no embedded fonts inside the OLED controller, user can create the fonts through the font generation software
- Applications: 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects;
Price 950 Birr
https://vector4engineering.com/product/oled/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
- It supports many chips: compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Resolution: 128 x 64;
- View angle: more than 160 degree;
- Support voltage: 3.3V-5V DC;
- Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded driver IC: SSD1306;
- Communication: I2C/IIC Interface, only need 2 I/O ports;
- Compatible with MMDVM, Pi-Star
- Self-luminous: needn’t backlight, the display can self-luminous;
- It has high contrast, bright and crisp dots, even tiny fonts quite readable
- About fonts: no embedded fonts inside the OLED controller, user can create the fonts through the font generation software
- Applications: 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects;
Price 950 Birr
https://vector4engineering.com/product/oled/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
I2C MODULE
- The PCF8574 is a generic I2C to 8-bit I/O device and the module can be repurposed for other uses besides driving LCD modules.
- Provides I2C to parallel data conversion
- Backlight enable jumper
- Contrast control potentiometer
0 0x27 I2C default address. Solder jumper selectable from 0x20 – 0x27
- 100kHz I2C clock speed
- 5V operation typical, but also operates at 3.3V.
- This LCD I2C interface adapter can be added to a 16 x 2 or 20 x 4 character LCD display with a standard parallel interface to make it I2C compatible. It can also be repurposed for other I2C to parallel tasks.
Price 500 Birr
https://vector4engineering.com/product/i2c-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- The PCF8574 is a generic I2C to 8-bit I/O device and the module can be repurposed for other uses besides driving LCD modules.
- Provides I2C to parallel data conversion
- Backlight enable jumper
- Contrast control potentiometer
0 0x27 I2C default address. Solder jumper selectable from 0x20 – 0x27
- 100kHz I2C clock speed
- 5V operation typical, but also operates at 3.3V.
- This LCD I2C interface adapter can be added to a 16 x 2 or 20 x 4 character LCD display with a standard parallel interface to make it I2C compatible. It can also be repurposed for other I2C to parallel tasks.
Price 500 Birr
https://vector4engineering.com/product/i2c-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
S3003 SERVO MOTOR
- Model: S3003 Servo Motor
- Dead Band: 0.100 ms
- Control System: +Pulse Width Control
- Working Frequence: 20ms period / 50hz (Analog Control)
- (RX) Required Pulse: 3.0 ~ 5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8 ~ 6 V DC Volts
- Operating Speed (4.8v): 0.200 sec/60° degrees at no load
- Operating Speed (6v): 0.160 sec/60° degrees at no load
- Stall Torque (4.8v): 9.4kg/cm
- Stall Torque (6v): 11kg/cm
- Motor Type: Brushed Motor
- Potentiometer Drive: Direct Drive
- Continuous Rotation Modifiable: Yes
- Direction w/ Increasing PWM Signal: Counter Clockwise
- Motor Type: 3 Pole Ferrite
- Gear Type: Plastic Gears,Straight Cut Spear
- Gear Material:Nylon
- Case Material: Plastic
- Connector Wire Length: 32.0cm (12.6 inch)
- Dimensions: 40.7×19.7×42.9mm
- Weight: 37 grams (1.3 oz)
Price 1,300 Birr
https://vector4engineering.com/product/s3003/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
- Model: S3003 Servo Motor
- Dead Band: 0.100 ms
- Control System: +Pulse Width Control
- Working Frequence: 20ms period / 50hz (Analog Control)
- (RX) Required Pulse: 3.0 ~ 5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8 ~ 6 V DC Volts
- Operating Speed (4.8v): 0.200 sec/60° degrees at no load
- Operating Speed (6v): 0.160 sec/60° degrees at no load
- Stall Torque (4.8v): 9.4kg/cm
- Stall Torque (6v): 11kg/cm
- Motor Type: Brushed Motor
- Potentiometer Drive: Direct Drive
- Continuous Rotation Modifiable: Yes
- Direction w/ Increasing PWM Signal: Counter Clockwise
- Motor Type: 3 Pole Ferrite
- Gear Type: Plastic Gears,Straight Cut Spear
- Gear Material:Nylon
- Case Material: Plastic
- Connector Wire Length: 32.0cm (12.6 inch)
- Dimensions: 40.7×19.7×42.9mm
- Weight: 37 grams (1.3 oz)
Price 1,300 Birr
https://vector4engineering.com/product/s3003/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
GT2 TIMING BELT
- Length: Open ended/loop
- Width: 5mm
- Type: GT2 Open Timing Belt
Price 650 Birr
https://vector4engineering.com/product/gt2-belt/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- Length: Open ended/loop
- Width: 5mm
- Type: GT2 Open Timing Belt
Price 650 Birr
https://vector4engineering.com/product/gt2-belt/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
PICKIT2 PROGRAMMER SET
- Totally enclosed
- Supports low voltage to 2.0 volts (2.0v to 6.0v range)
- Read/write program and data memory of microcontroller
- Compatible with PICKIT2 IC, MPLAB IDE v8.56 software can be seen.
- Microchip online programming and debugging PICKIT2 PIC10/12/16/18/24/32, dsPIC30/dsPIC33 almost all line of FLASH PIC microcontroller chip. And PICKIT2 to program the Microchip KEELOQ of the HCS series of chips, MCP250xx can chips EEPROM memory chip. (Detailed models see schedule)
- The PICkit2 support device models: PIC10F series, PIC12F series, PIC16F series, PIC18F series, PIC24 series, dsPIC30 series, DSPIC33 series, PIC32 series, 11 serial EEPROM devices, 24 Serial EEPROM Devices, 25 Serial Serial EEPROM Devices, 93 Serial Devices Serial EEPROM, MCP250xx devices
Package Includes:
1 X PICKIT2 Simulator
1 X USB cable
1 X 6pin cable
1 x Universal Programmer Seat
Price 4500 Birr
https://vector4engineering.com/product/pickit2-programmer-set/
- Totally enclosed
- Supports low voltage to 2.0 volts (2.0v to 6.0v range)
- Read/write program and data memory of microcontroller
- Compatible with PICKIT2 IC, MPLAB IDE v8.56 software can be seen.
- Microchip online programming and debugging PICKIT2 PIC10/12/16/18/24/32, dsPIC30/dsPIC33 almost all line of FLASH PIC microcontroller chip. And PICKIT2 to program the Microchip KEELOQ of the HCS series of chips, MCP250xx can chips EEPROM memory chip. (Detailed models see schedule)
- The PICkit2 support device models: PIC10F series, PIC12F series, PIC16F series, PIC18F series, PIC24 series, dsPIC30 series, DSPIC33 series, PIC32 series, 11 serial EEPROM devices, 24 Serial EEPROM Devices, 25 Serial Serial EEPROM Devices, 93 Serial Devices Serial EEPROM, MCP250xx devices
Package Includes:
1 X PICKIT2 Simulator
1 X USB cable
1 X 6pin cable
1 x Universal Programmer Seat
Price 4500 Birr
https://vector4engineering.com/product/pickit2-programmer-set/
CNC BREAKOUT BOARD
- Fully compatible with MACH3 and other parallel port control compatible software.
- USB power supply and phase separation powered by peripherals to protect computer security.
- Peripheral wide voltage input, 12-24V and anti-reverse function.
- All the input signal, all the lotus light isolated, emergency stop can be accessed on the knife, the limit to protect the security of the computer.
- To the relay output port, control spindle switch. Output port p17.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1.
- Open the 17 ports, which can be accessed with the optocoupler drive, the 5-axis stepper motor can be controlled.
- P1 outputs as PWM can be controlled by optocoupler input spindle regulator.
- Can be accessed by a common cathode or common anode input level to a 5V drive.
Price 3000 Birr
https://vector4engineering.com/product/breakout-board/
- Fully compatible with MACH3 and other parallel port control compatible software.
- USB power supply and phase separation powered by peripherals to protect computer security.
- Peripheral wide voltage input, 12-24V and anti-reverse function.
- All the input signal, all the lotus light isolated, emergency stop can be accessed on the knife, the limit to protect the security of the computer.
- To the relay output port, control spindle switch. Output port p17.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1.
- Open the 17 ports, which can be accessed with the optocoupler drive, the 5-axis stepper motor can be controlled.
- P1 outputs as PWM can be controlled by optocoupler input spindle regulator.
- Can be accessed by a common cathode or common anode input level to a 5V drive.
Price 3000 Birr
https://vector4engineering.com/product/breakout-board/
POWER SUPPLY 36V/20A 720W
- Output voltage: DC36V
- Output Current: DC 20A
- Rated Power: 720W
- Ripple and noise: 120mVp-p
- Configuration, rise time: 500ms,20ms/230VAC
- Frequency range: 47-63HZ
- Efficiency (type): > 80%
- Environment: Working temperature -10~+60°C
- Operating humidity: 20-90% RH non-condensing
- Storage temperature, humidity: -20 ~ + 85 °C, 10-95% RH
- Case Material: Metal Case/Aluminum Case
- Dimensions: 238x124x65mm
Price 12500 Birr
https://vector4engineering.com/product/power-supply-720w/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- Output voltage: DC36V
- Output Current: DC 20A
- Rated Power: 720W
- Ripple and noise: 120mVp-p
- Configuration, rise time: 500ms,20ms/230VAC
- Frequency range: 47-63HZ
- Efficiency (type): > 80%
- Environment: Working temperature -10~+60°C
- Operating humidity: 20-90% RH non-condensing
- Storage temperature, humidity: -20 ~ + 85 °C, 10-95% RH
- Case Material: Metal Case/Aluminum Case
- Dimensions: 238x124x65mm
Price 12500 Birr
https://vector4engineering.com/product/power-supply-720w/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
PICKIT2 PROGRAMMER
- Totally enclosed
Package Includes:
1 X PICKIT2 Simulator
1 X USB cable
1 X 6pin cable
Price 2100 Birr
https://vector4engineering.com/product/pickit2-programmer/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- Totally enclosed
Package Includes:
1 X PICKIT2 Simulator
1 X USB cable
1 X 6pin cable
Price 2100 Birr
https://vector4engineering.com/product/pickit2-programmer/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
7 SEGMENT DISPLAY
- Single digit 7 segment display
- Model 5161AS
- Emitting Color RED
- Voltage 1.8V – 1.9V
- Wavelength 648nm
- Common Cathode
Price 100 Birr
https://vector4engineering.com/product/7-segment/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- Single digit 7 segment display
- Model 5161AS
- Emitting Color RED
- Voltage 1.8V – 1.9V
- Wavelength 648nm
- Common Cathode
Price 100 Birr
https://vector4engineering.com/product/7-segment/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
LCD 3D PRINTER
- Item Type: 12864 LCD Control Module
- Specification: 12864 Control board
Version V1.2
- Smart controller includes a memory card reader, very convenient for you to use,Equipped with rotary encoder and a practical 20 character 4 line LCD display
- The 3D printer smart controller is made of high class material, comes with good quality
- Comes with liquid crystal display, the screen display is clear, easy to read and control
- 12864 LCD control module comes with stable structure, excellent performance and long service life
Price 4000 Birr
https://vector4engineering.com/product/lcd-3d-printer/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- Item Type: 12864 LCD Control Module
- Specification: 12864 Control board
Version V1.2
- Smart controller includes a memory card reader, very convenient for you to use,Equipped with rotary encoder and a practical 20 character 4 line LCD display
- The 3D printer smart controller is made of high class material, comes with good quality
- Comes with liquid crystal display, the screen display is clear, easy to read and control
- 12864 LCD control module comes with stable structure, excellent performance and long service life
Price 4000 Birr
https://vector4engineering.com/product/lcd-3d-printer/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
ENDER 3 PRO 3D Printer
Brand: Creality3D
Type: DIY
FDM Printer
Model: Ender 3 Pro
Display: Colour LCD screen
Platform: Magnetic print bed
Hot bed: Yes
Size of the print bed: 220 x 220 x 250 mm
Maximum temperature of the hot bed: 110º
Number of extruders: 1
Extruder type: Bowden
Model: MK10
40 x 40 mm aluminum extrusion
Fuser: Melting temperature: 0-255º
Layer thickness: 0.1-0.4mm
Nozzle diameter: 0.4mm (can be substituted for other sizes)
Compatible with 1.75mm diameter filament
Accuracy: ± 0.1 mm
Maximum print speed: 180mm / s
Fan on top
Connectivity: MicroSD,USB
Printing materials:PLA,TPU,PETG,Flexible 95A, Composites…
Language: English, Chinese
Supported operating systems: Windows / Mac / Linux
Software: compatible with any lamination software: Ultimater Cura, Simplify 3D, Slic3r, etc …
Formats: STL, OBJ, G-Code
Power supply: Improved Mean Well power supply
Input: AC 100-265V, 50-60Hz
Output: DC 24V, 15A, 360W
Price 85,000 Birr
https://vector4engineering.com/product/ender-3-pro/
Brand: Creality3D
Type: DIY
FDM Printer
Model: Ender 3 Pro
Display: Colour LCD screen
Platform: Magnetic print bed
Hot bed: Yes
Size of the print bed: 220 x 220 x 250 mm
Maximum temperature of the hot bed: 110º
Number of extruders: 1
Extruder type: Bowden
Model: MK10
40 x 40 mm aluminum extrusion
Fuser: Melting temperature: 0-255º
Layer thickness: 0.1-0.4mm
Nozzle diameter: 0.4mm (can be substituted for other sizes)
Compatible with 1.75mm diameter filament
Accuracy: ± 0.1 mm
Maximum print speed: 180mm / s
Fan on top
Connectivity: MicroSD,USB
Printing materials:PLA,TPU,PETG,Flexible 95A, Composites…
Language: English, Chinese
Supported operating systems: Windows / Mac / Linux
Software: compatible with any lamination software: Ultimater Cura, Simplify 3D, Slic3r, etc …
Formats: STL, OBJ, G-Code
Power supply: Improved Mean Well power supply
Input: AC 100-265V, 50-60Hz
Output: DC 24V, 15A, 360W
Price 85,000 Birr
https://vector4engineering.com/product/ender-3-pro/
MAGNETIC DOOR CONTACTS
- MC 38 Mount Wired Door Window Sensor Magnetic Reed Switch Recessed Alarm Security System Normally Closed NC, White.
- Contact Capacity : 0.5A(Maximum Switch Current)
- Voltage : 100V
- Rated Power : 10W
- Actuation Distance : 15-25mm
- Size(Approx) : 2.8 x 1.5 x 1.3 / 1.1″ x 0.6″ x 0.5″(L*W*H)
- Color : White
- Housing Material : Plastic
- Weight : 80g
Price 500 Birr
https://vector4engineering.com/product/magnetic-door-contacts/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
- MC 38 Mount Wired Door Window Sensor Magnetic Reed Switch Recessed Alarm Security System Normally Closed NC, White.
- Contact Capacity : 0.5A(Maximum Switch Current)
- Voltage : 100V
- Rated Power : 10W
- Actuation Distance : 15-25mm
- Size(Approx) : 2.8 x 1.5 x 1.3 / 1.1″ x 0.6″ x 0.5″(L*W*H)
- Color : White
- Housing Material : Plastic
- Weight : 80g
Price 500 Birr
https://vector4engineering.com/product/magnetic-door-contacts/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING