Vector Four Enginnering/Arduino Shop/ Electronics Supermarket
7.81K subscribers
1.73K photos
9 videos
3 files
1.38K links
(Arduino Shop)
website: www.vector4engineering.com
Telegram contact @VectorZEF @VectorYOB
@Vector111
and Call @ 0993802995/097022227 telegram: https://t.me/vectorfour
A/A, Megenagna, Zefmesh mall, 3rd floor, shop 301
Download Telegram
MICRO PUSH BUTTON
- Momentary contact, 4 pins, round black push button, through hole mounting
- Size: 6 x 6 x 5mm.
- Rated Load:DC12V 50mA.
- Contact Resistance:≤0.03Ω
- Insulation Resistance:≥100MΩ
- Withstand Voltage:AC250V
Price 30 Birr
https://vector4engineering.com/product/micro-push-button/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
POTENTIOMETER
- 1K,5k,10K and 100k ohm
- 3 Pin 15mm Shaft potentiometer
- The Rotary potentiometer can deliver adjustable supply voltage to the electrical and electronic circuits.
- Tolerance: 20%
- Shaft Length: 15mm
- Length 20mm
- Width 17mm (Body Diameter)
- Height 24mm
Price 200 Birr
https://vector4engineering.com/product/potentiometer/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
2 CHANNEL RELAY MODULE
-With isolation groove between control area and load area
- Relay Voltage: 5V
- Equiped with high-current Load: AC250V 10A or DC30V 10A
- High impedance controller pin
Pull-down circuit for the avoidance of malfunction
- Control zone and the load zone isolation groove design, double FR-4 circuit board, high-end patch technology, product performance is stable and reliable.
- It can be used as a single chip module for appliance control and work with both DC or AC signals where you can control the 220V AC load.
- Straight Headers for control signals
Price 1250 Birr
https://vector4engineering.com/product/2-channel-relay/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
DHT11 MODULE
- The DHT11 is a commonly used Temperature and humidity sensor that comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data.
- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA (measuring) 60uA (standby)
- Output: Serial data
- Temperature Range: 0°C to 50°C
- Humidity Range: 20% to 90%
- Resolution: Temperature and Humidity both are 16-bit
- Accuracy: ±1°C and ±1%
Price 600 Birr
https://vector4engineering.com/product/dht11-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
R307 FINGER PRINT SENSOR
- R307 Optical Fingerprint Reader Module
- Type: Optical
- Backlight: Blue
- Interface: USB2.0/UART(TTL logical level)
- RS232 Communication Baud Rate: 9600BPS~115200BPS changeable
- Verification Speed: 0.1 sec
- Scanning Speed: 0.2 sec
- Character File Size: 256 bytes
- Template Size:512 bytes
- Storage Capacity: 1000
- Security Level: 5 (1,2,3,4,5(highest)
- FRR (False Rejection Ratio): ≤1%
- FAR (False Acceptance Ratio): ≤0.0001%
- Resolution: 500 DPI
- Voltage: DC 4.2 - 6V
- Working Current: 50mA (Typical)
- Peak Current: 75mA
- Matching Method: 1 : N
- Operating Temperature: -20 - 50 °
- Image Capture Surface: 1.5×1.1mm
- Overall Size: 4.5×2.4x2cm
Price 2500 Birr
https://vector4engineering.com/product/r307/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
DHT22
- The DHT22 is a commonly used Temperature and humidity sensor. The sensor comes with a dedicated NTC to measure temperature and an 8-bit microcontroller to output the values of temperature and humidity as serial data. The sensor is also factory calibrated and hence easy to interface with other microcontrollers.
- Operating Voltage: 3.5V to 5.5V
- Operating current: 0.3mA (measuring) 60uA (standby)
- Output: Serial data
- Temperature Range: -40°C to 80°C
- Humidity Range: 0% to 100%
- Resolution: Temperature and Humidity both are 16-bit
- Accuracy: ±0.5°C and ±1%
Price 950 Birr
https://vector4engineering.com/product/dht22/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
LED
- Red, Blue, Green, Yellow or White
- 5mm LEDs are incredibly bright with a wide beam angle.
- They’re suitable for use in your projects, illuminations, car lighting, models or anywhere where you need low power, high-intensity reliable lighting or indication.
- They fit easily into a breadboard.
- The lens has a frosted effect, which distributes the light evenly.
Price 5 Birr
https://vector4engineering.com/product/led/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
ESP 8266 WIFI MODULE
- Power Supply: +3.3V only
- Compact and powerful Wi-Fi Module
- Current Consumption: 100mA
- I/O Voltage: 3.6V (max)
- I/O source current: 12mA (max)
- Built-in low power 32-bit MCU @ 80MHz
- 512kB Flash Memory
- Can be used as Station or Access Point or both combined
- Supports Deep sleep (<10uA)
- Supports serial communication hence compatible with many development platform like Arduino
- Can be programmed using Arduino IDE or AT-commands or Lua Script
Price 750 Birr
https://vector4engineering.com/product/esp-8266-wifi-module/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
NRF 2.4GHZ WIRELESS RADIO TRANSCEIVER MODULE
- Worldwide 2.4GHz ISM band operation
- Up to 2Mbps on air data rate
- Ultra low power operation
- 11.3mA TX at 0dBm output power
- 12.3mA RX at 2Mbps air data rate
- 900nA in power down,22μA in standby
- On chip voltage regulator
- 1.9 to 3.6V supply range
- Enhanced Shock Burst
- Automatic packet handling
- Auto packet transaction handling
- 6 data pipe Multi-receiver
- 5V tolerant inputs
Price750 Birr
https://vector4engineering.com/product/nrf/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERIN
SWITCH KCD3
- KCD3 On-Off 2 position
- Poles: SPST
- Action Type : Latching
- Voltage/Current: AC 250V/15A 125V/20A
- Color : Red
- Mounting Size: 27 mm x 10mm(L*W)
- Overall Size: 31mm x 14mm x 35mm(L*W*H)
Price 150 Birr
https://vector4engineering.com/product/switch-kcd3/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
AVIATION CONNECTOR
- 4 Pin Male Female Circular Aviation Connector Plug 16mm Wire Panel Metal Connector
- Model Number: 4Pin GX16 Aviation Plug
- Shell Material: Zinc alloy, bakeute
- Pin material: Copper alloy
- Surface treatment:Plate with nickel
- Plug diameter: 16 mm
- Color: silver
- Rated current 5A
- Rated voltage 125V
- Working voltage 200V
- Withstand voltage 1500V
Price 550 Birr
https://vector4engineering.com/product/aviation-connector/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
REAL TIME CLOCK
DS3231 or DS1302
- Operating Voltage: 2.3 – 5.5 Volts
- Operating Temperature: -45 – 80°C
- Maximum Voltage: VCC+0.3 Volts
- Battery Backup Current: 500 mA
- Accuracy at -40 – 80°C: ±3.5 ppm
- Accuracy at 0 – 40°C: ± 2.0 ppm
- Temperature Accuracy: 3°C
- Can function with low voltages
- A programmable Square-wave output as per requirement
- A battery backup to stay updated even if there is no power
- A dual-directional, 400 kHz of I2C interface for speedy transmission
- 32 bytes of EEPROM to read/write or to save data
- RTC can be used either in 12hrs or 24hrs format
- Maintains seconds, minutes, hours, days, weeks, months, years information
- Switches automatically from a power source to an in-built battery source
Price 600 Birr
https://vector4engineering.com/product/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
STEPPER MOTOR CABLE
- 4 wire Stepper Motor cable
- with pitch connector
- 20cm long
Price 50 Birr
https://vector4engineering.com/product/stepper-motor-cable/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
JST CONNECTOR
- 4 Wire – 4 pin JST Connectors
- Wire length: 400 mm adding both male and Female connector
- Best for Led Lights & DIY Projects
Price 150 Birr per pair
https://vector4engineering.com/product/jst-connector/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
RFID
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
Price 1000 Birr
https://vector4engineering.com/product/rfid/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
HEART BEAT SENSOR
- KY-039 Heartbeat Sensor Module [5V] package includes of the heartbeat sensor or finger pulse sensor module, which is based on a bright infrared LED and a phototransistor to sense and detect the heartbeat of the human finger.
- Model: KY-039
- Output Type: Analog
- Working voltage: 5V
- Color: Black + white
- Pin Number: 3 Pin
- Size: 19mm x 15mm
Price 650 Birr
https://vector4engineering.com/product/ky-039/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
SIM800C GSM SHIELD
- Keyes SIM800C GPRS GSM Shield for Arduino
- Power supply (Vin): 6-12V
- In low power mode: the current in sleep mode is 0.7mA
- Low power consumption (100mA@7V-GSM mode)
- Quad frequency 850/900/1800/1900MHz
- GPRS multi-slot class 1~12
- GPRS mobile station class B
- Using GSM phase 2 / 2+ standard
- Class 4 (2W @ 850/900MHz)
- Class 1 (1W @ 1800 / 1900MHz)
- Control by AT command
- USB/Arduino control switch
- Serial port baud rate adaptive
- Support DTMF
- LED indicator can display power supply status, network status and working mode
Price 1500 Birr
https://vector4engineering.com/product/sim800c-gsm-shield/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
JOYSTICK MODULE
- Dual Axis Joystick Module
- Dimensions: 40 x 27 x 15 (LxWxH) mm
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads
- Operating Voltage: 5V
- Cross rocker as a two-way 10K resistor, with the rocker in a different direction
- With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”. It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller.
- The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions.
Price 500 Birr
https://vector4engineering.com/product/joystick/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
VECTOR FOUR ENGINEERING
RFID CARD
- Active RFID
- Material PVC
- Pattern Plain
- Thickness 0.3 to 0.5 mm
- Dimensions 85.60 x 53.98 mm
- Perfect size
- Quick detection
- Reliable working
- Safe from scratches
Price 200 Birr
https://vector4engineering.com/product/rfid-card/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
ALLIGATOR CLIP
- Miniature Crocodile Clip
- 4.5cm long
- Material is brass with PVC insulation
- Cable can be connected by soldering
- Single set – 1 red and 1 black alligator clip
Price 75 Birr per set
https://vector4engineering.com/product/alligator-clip/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301
0922787347 Kase/0924468599 Haben
VECTOR FOUR ENGINEERING
MPU6500 GYROSCOPE + ACCELEROMETER
- Power voltage: 3 – 5V
- Communication mode: I2C / SPI
- Register: 1MHz
- SPI / I2C: 400KHz
- Pitch: 2.54mm
- Size:15mm*25mm
- The MPU-6500 is a 6-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP).
- Digital-output X-, Y-, and Z-axis angular rate sensors (gyroscopes) with a user-programmable fullscale range of +/-250, +/-500, +/-1000, and +/-2000 degree /sec and integrated 16-bit ADCs
- Digital-output X-, Y-, and Z-axis accelerometer with a programmable full scale range of +/-2g, +/-4g, +/-8g and +/-16g and integrated 16-bit ADCs
- Auxiliary master I2C bus for reading data from external sensors (e.g. magnetometer)
- Internal DMP engine supports advanced Motion Processing and low power functions such as gesture recognition using programmable interrupts
Price 450 Birr
https://vector4engineering.com/product/mpu6500/
Address – Megenagna, Zefmesh Grandmall 3rd floor 301