This media is not supported in your browser
VIEW IN TELEGRAM
I'll be getting back to work tomorrow
My apologies to anyone I haven't responded to
I was taking some time off—I explained the reason in my previous post :(
For now,I'm just enjoying the fact that I bought a great mop and I'm cleaning my apartment, heheh
Завтра сажусь работать
Простите пожалуйста если я кому-то не отвечаю и т.д., у меня был отдых и я писала пост выше почему :(
А пока что я радуюсь тому что купила хорошую швабру и убираюсь в квартире хехех
My apologies to anyone I haven't responded to
I was taking some time off—I explained the reason in my previous post :(
For now,I'm just enjoying the fact that I bought a great mop and I'm cleaning my apartment, heheh
Завтра сажусь работать
Простите пожалуйста если я кому-то не отвечаю и т.д., у меня был отдых и я писала пост выше почему :(
А пока что я радуюсь тому что купила хорошую швабру и убираюсь в квартире хехех
🥰9
I can't sleep because of the cat. Tomorrow,or rather today already, I have to take this silly one to the vet because of a problem with his nail... I won't describe the whole problem, but it all looks pretty serious and we couldn't fix it with usual methods. I suspect he has a fungus and we'll need to see not just a general practitioner, but a dermatologist...
Не могу уснуть из-за кота. Завтра, а вернее уже сегодня, надо везти этого дурочка к ветеринару из-за проблем с ногтем... Я не буду описывать полностью проблему, но выглядит все вроде как серьёзно и обычными способами вылечить его не удалось. Подозреваю, что у него грибок и нужно будет идти не только к терапевту, но и к дерматологу...
Не могу уснуть из-за кота. Завтра, а вернее уже сегодня, надо везти этого дурочка к ветеринару из-за проблем с ногтем... Я не буду описывать полностью проблему, но выглядит все вроде как серьёзно и обычными способами вылечить его не удалось. Подозреваю, что у него грибок и нужно будет идти не только к терапевту, но и к дерматологу...
❤9
This media is not supported in your browser
VIEW IN TELEGRAM
The cat is perfectly fine; now he has a stylish, fashionable spacesuit.
С котом все ок
Зацените его новый скафандр
С котом все ок
Зацените его новый скафандр
❤13
While someone is asking how I'm doing... IT'S ALL GOING TO HELL,ABSOLUTELY AWFUL. Yesterday,I was printing important parts for orders and went to sleep. An hour later,I wake up and hear strange noises. The printer had leaked and printed me a Venom. The result: Replacing the hotend,and if that doesn't help—buying a new printhead. Goodbye,paycheck.
Пока кто-то спрашивает как у меня дела... ВСЕ ЧЕРТ ВОЗЬМИ УЖАСНО. Вчера я ставила на печать важные детали для заказов и ушла спать. Спустя час я просыпаюсь и слышу странные звуки.
Принтер потёк и распечатал мне Venom.
Итог: Замена хотенда и если не поможет-покупка новой печатной головки. Прощай зарплата.
Пока кто-то спрашивает как у меня дела... ВСЕ ЧЕРТ ВОЗЬМИ УЖАСНО. Вчера я ставила на печать важные детали для заказов и ушла спать. Спустя час я просыпаюсь и слышу странные звуки.
Принтер потёк и распечатал мне Venom.
Итог: Замена хотенда и если не поможет-покупка новой печатной головки. Прощай зарплата.
😭10😱2
will not give up and I will not leave.
I have a lot of good news I want to share, and just a tiny bit of bad news.
Let’s start with the good.
I am very… happy that there are people in my circle who helped me and can help me.
I bought a new printer, and the printing process has been going really well. I’m waiting for one of the parts to finish printing so I can fully appreciate the scale of my happiness.
The printer has a very large build plate, and now I can print all the parts for a head, including an entire head, at once!
In the second photo, you can see the printing progress on the new printer. From the appearance alone, I can immediately say that everything looks absolutely great!
As an example of bad printing, the third photo shows poor layer adhesion, banding, and surface unevenness.
On the previous printer, all recent bases were thrown away because they can’t be used.
I have a lot of good news I want to share, and just a tiny bit of bad news.
Let’s start with the good.
I am very… happy that there are people in my circle who helped me and can help me.
I bought a new printer, and the printing process has been going really well. I’m waiting for one of the parts to finish printing so I can fully appreciate the scale of my happiness.
The printer has a very large build plate, and now I can print all the parts for a head, including an entire head, at once!
In the second photo, you can see the printing progress on the new printer. From the appearance alone, I can immediately say that everything looks absolutely great!
As an example of bad printing, the third photo shows poor layer adhesion, banding, and surface unevenness.
On the previous printer, all recent bases were thrown away because they can’t be used.
🔥5🥰2🕊1
One of my fellow maker friends came over and helped me set up the printer, gave me a lot of useful printing advice, and overall we had a nice chat — it really boosted my morale!
In addition to the printer, I also bought a filament dryer. With it, the print quality will be at the highest level.
I have finally purchased a professional fur clipping machine with a metal blade. I had been using very cheap clippers all the time, which often caused problems when trimming fur… Frequent bald spots, stripes from uneven trimming, blades getting stuck in the fur, and sometimes being completely unable to trim the fur at all.
Also, because cheap clippers use ceramic blades, they dull quickly and cut poorly.
The new clipper cuts fur of any density, does so evenly, and it’s practically impossible to leave a bald spot with it.
On top of that, the blades can be sharpened independently, so there’s no need to buy new ones every time…
In addition to the printer, I also bought a filament dryer. With it, the print quality will be at the highest level.
I have finally purchased a professional fur clipping machine with a metal blade. I had been using very cheap clippers all the time, which often caused problems when trimming fur… Frequent bald spots, stripes from uneven trimming, blades getting stuck in the fur, and sometimes being completely unable to trim the fur at all.
Also, because cheap clippers use ceramic blades, they dull quickly and cut poorly.
The new clipper cuts fur of any density, does so evenly, and it’s practically impossible to leave a bald spot with it.
On top of that, the blades can be sharpened independently, so there’s no need to buy new ones every time…
❤4🥰2
I believe all these upgrades will take the quality of my work to a new level, and I hope to work faster and with better quality, without a ton of problems and breakdowns.
Bad news:
The printer was purchased on credit, and starting in January I’ll need to pay 15k rubles every month. According to my calculations, I should manage, but I also still need to pay the same amount on my credit card every month, and all of this causes me intense anxiety.
However, I believe I’ll be able to work faster now, since all my equipment issues have been resolved. I’m also still waiting for the authorities to process the change of my insurance policy from the Kaluga region to Moscow. Until they do, I can’t receive free medical care because I’m unable to register with a local clinic. I hope to resolve this issue before the New Year so that afterward I can start seeing doctors and actively begin taking care of my health.
I’ll try to share updates more often. For now, I’m actively printing new orders and finishing up older ones.
Bad news:
The printer was purchased on credit, and starting in January I’ll need to pay 15k rubles every month. According to my calculations, I should manage, but I also still need to pay the same amount on my credit card every month, and all of this causes me intense anxiety.
However, I believe I’ll be able to work faster now, since all my equipment issues have been resolved. I’m also still waiting for the authorities to process the change of my insurance policy from the Kaluga region to Moscow. Until they do, I can’t receive free medical care because I’m unable to register with a local clinic. I hope to resolve this issue before the New Year so that afterward I can start seeing doctors and actively begin taking care of my health.
I’ll try to share updates more often. For now, I’m actively printing new orders and finishing up older ones.
❤🔥4❤1
Should I post a couple of my new works and other processes from all the long time I haven’t updated Telegram? 🦝
👍5❤1🙏1