implementation result..
the system contains 20 x 4 LCD display, Arduino UNO board, ultrasonic level sensor, current sensor and temperature sensor.. and it use xbee to communicate with the data collection system.
đđđđđđ pls.. join
@thesisprojects
đđđđđđ
@niko12
the system contains 20 x 4 LCD display, Arduino UNO board, ultrasonic level sensor, current sensor and temperature sensor.. and it use xbee to communicate with the data collection system.
đđđđđđ pls.. join
@thesisprojects
đđđđđđ
@niko12
final thesis_new.pdf
1.4 MB
IOT based ATS and UPS monitoring of remote BTS full document
project title : Wireless Robot Car To Disinfect The Street From Covid-19
abstract :
From the recent times, the world has been going through life threaten pandemic corona virus. Many peoples have passed away due to absence of therapeutic medical treatment as well as lack of preventive technology. Especially, corona virus jeopardizes developing countries to disturbances for instance our country threat to economic, social, political crisis due to backwardness of technological progress as well as weak economic status.
Therefore, to keep away from these crises, it needs immediate preventive technology to fight against pandemic corona virus. Due to this we initiate to design Wireless robot car disinfecting the street from covid-19. It disinfects the environment where people mostly they work and move as well as sanitize human touched materials in the way of street.
đđđđđđđđ
the remote control..
abstract :
From the recent times, the world has been going through life threaten pandemic corona virus. Many peoples have passed away due to absence of therapeutic medical treatment as well as lack of preventive technology. Especially, corona virus jeopardizes developing countries to disturbances for instance our country threat to economic, social, political crisis due to backwardness of technological progress as well as weak economic status.
Therefore, to keep away from these crises, it needs immediate preventive technology to fight against pandemic corona virus. Due to this we initiate to design Wireless robot car disinfecting the street from covid-19. It disinfects the environment where people mostly they work and move as well as sanitize human touched materials in the way of street.
đđđđđđđđ
the remote control..
đ2
SIMULATION.pdsprj
28.9 KB
protues file..
arduino code ( for remote and robot car) đđđ
arduino code ( for remote and robot car) đđđ
project title: IR based dish position control
ABSTRACT
Satellite dishes and antennas are mounted in very precarious locations, in an attempt to steer clear from any obstructions such as buildings and trees. This imposes risk when it comes to installing and servicing those installed dishes for proper alignment.
We therefore propose to design and implement a dish control system to assist in positioning and general installation of satellite dishes. This system will seek to use IR remote and receiver, Arduino and two Stepper motor to adjust the dish position.It consists of two motors that will enable the dish to move both in horizontal and vertical direction. An Arduino will be used as the controller to interface between the signals from the IR remote, to adjusting the motors. In the end, this project seeks to solve the problem of manually adjusting the dish and providing a safe solution for mounting satellite dishes.
Share share shaređđ
@thesisprojects
@niko12
đđđđđ
protues file and arduino code
ABSTRACT
Satellite dishes and antennas are mounted in very precarious locations, in an attempt to steer clear from any obstructions such as buildings and trees. This imposes risk when it comes to installing and servicing those installed dishes for proper alignment.
We therefore propose to design and implement a dish control system to assist in positioning and general installation of satellite dishes. This system will seek to use IR remote and receiver, Arduino and two Stepper motor to adjust the dish position.It consists of two motors that will enable the dish to move both in horizontal and vertical direction. An Arduino will be used as the controller to interface between the signals from the IR remote, to adjusting the motors. In the end, this project seeks to solve the problem of manually adjusting the dish and providing a safe solution for mounting satellite dishes.
Share share shaređđ
@thesisprojects
@niko12
đđđđđ
protues file and arduino code
đ1
dish_position_control.ino
2.6 KB
arduino code for implimentetion
dish_position_control_simulation.ino
2.5 KB
arduino code for simulation (use virtual terminal to send command)
áááá á¨áĽáľááá áĽáááľ á°á¨áłáŽá˝ á áá áĽááłá á1442áá á¨ááľ á áááĽá á áá á á°áá á á°á¨áłá˝á!
á áá á¨á°áá á¨áá á á¨á°áľáł ááá áááľ áááŤá áááłá˝áá áĽááááťáá!
#ááľ_ááŁá¨á
âŞâŞâŞâŞâŞâŞâŞâŞ
á áá á¨á°áá á¨áá á á¨á°áľáł ááá áááľ áááŤá áááłá˝áá áĽááááťáá!
#ááľ_ááŁá¨á
âŞâŞâŞâŞâŞâŞâŞâŞ
Project title: PID based dish position control with manual and auto mode.
(Auto correct wind disturbance)
Share share shaređđ
@thesisprojects
@niko12
đđđđđđ
Protues file..
(Auto correct wind disturbance)
Share share shaređđ
@thesisprojects
@niko12
đđđđđđ
Protues file..
Project title : Under and over voltage protection with status monitoring
Share share shaređđ
@thesisprojects
@niko12
đđđđđđ
Protues file..
Share share shaređđ
@thesisprojects
@niko12
đđđđđđ
Protues file..