#kalitools #adapter #usb #wifiadapter wifiadapter
alfa adapter AWUS036NHA
Chipset = AR9271
¶¶ Compatible with IEEE 802.11n, 802.11b/g/n wireless standards
¶¶ Supports both monitor mode & packet injection
2.4Ghz / 150-300mbps
¶¶ no need to install drivers

¶¶ ebay link : http://tinsy.me/jb6RBM
👆👆
¶¶ windows and linux
https://docs.alfa.com.tw/Product/AWUS036NHA/

¶¶ tube - una

https://docs.alfa.com.tw/Product/Tube-UNA/

Chipset = rtl8188eus  (802.11N )
Compatible with 802.11/b/n ( 2.4Ghz / 150Mbps )
Usb: 2.0
Antenna 5Dbi
kali : 5.18.0
#wifiadapter wifiadapter
#VIF not supported

¶¶ AliExpress : https://a.aliexpress.com/_m0Ujufe

¶¶ Drivers :https://github.com/aircrack-ng/rtl8188eus

#wifiadapter #kalitools #adapter
supports #monitormode #packetinjection wifiadapter

plug in
📍lsusb ( to check if its connected
📍sudo apt update && sudo apt upgrade
📍sudo reboot

¶¶ Now Install Kali Linux headers for your kali Linux

📍sudo apt install linux-headers-$(uname -r)
📍sudo apt install bc
📍sudo rmmod r8188eu.ko
📍cd Dekstop

📍git clone https://github.com/aircrack-ng/rtl8188eus
📍cd rtl8188eus

(----- if your using another adapter with EU plx dont blacklist it .cox EU chipset adapter might not work . tested ------------)

📍echo "blacklist r8188eu" > "/etc/modprobe.d/realtek.conf"

exit
reboot

📍cd Desktop
📍cd rtl8188eus
📍make
📍sudo make install
📍sudo modprobe 8188eu


¶¶ Enabled Monitor Mode
Every time when you want to enabled monitor mode. run the following commands.

📍sudo ifconfig wlan0 down
📍sudo airmon-ng check kill
📍sudo iwconfig wlan0 mode monitor
📍sudo ifconfig wlan0 up
📍sudo iwconfig

¶¶blackbird
An OSINT tool to search fast for accounts by username across 574 sites.
#osint #socialmedia #kalitools


📍git clone https://github.com/p1ngul1n0/blackbird
📍cd blackbird
📍pip install -r requirements.txt

usage:
to check all sites supported :
📍python3 blackbird.py --list-sites
📍python blackbird.py -u username

Run WebServer
📍python blackbird.py --web
Access http://127.0.0.1:9797 on the browser
📍python blackbird.py -f username.json

if you want to use proxy :
📍python blackbird.py -u crash --proxy http://127.0.0.1:8080

to see all found accounts :
📍python blackbird.py -u crash --show-all

MT7601 Mini USB WiFi Adapter
2.4Ghz ( compatible with 802.11b/g/n devices)
150Mbp
Support both monitor mode & packet injection
No need to install drivers
Nethunter User's
#kalitools #wifite2 #wifiadapters #nethunter #wifiadapter #wifiadapter
#VIF not supported

¶¶chipset : MT7601U

¶¶ ebay
http://tinsy.me/sa8rFZ


¶¶ Aliexpress (mt7601 )
http://tinsy.me/Xjsgyx

¶¶ All about Airgeddon


we get VIF Not supported on most of the adapters for airgeddon


📍Alfa AWUS036ACM
📍Panda PAU07 / Panda PAU09be

u can buy on ebay and amazone


https://github.com/v1s1t0r1sh3r3/airgeddon/wiki/Cards%20and%20Chipsets

https://github.com/v1s1t0r1sh3r3/airgeddon/wiki/FAQ%20&%20Troubleshooting#my-fake-ap-is-not-working-on-any-evil-twin-attack-why

https://github.com/v1s1t0r1sh3r3/airgeddon/wiki/Plugins%20Hall%20of%20Fame

¶¶ Pass_Make-R
Generate short password list with victims information NickName/fullname/date-of-birth/ for termux
#pass #password .txt #brute

📍apt update
📍apt upgrade
📍pkg install python
📍pkg install git
📍git clone https://github.com/Rihan444/Pass_Make-R
📍cd Pass_Make-R
📍python passmaker.py

i-Haklab is a hacking laboratory for Termux that contains open source tools for osint, pentesting, scan/find vulnerabilities, explotation and post-explotation recommended for me Ivam3 with automation commands, a many guides, books and tutorials to learn how to use tools.

This,changes everything in termux . So please read before installing this tool . u can check youtube videos also . everything is run with i-Haklab and command .

📍git clone https://github.com/ivam3/i-Haklab
📍cd i-Haklab
📍chmod +x setup
📍bash setup (It could take a while) ...


default password =Ivam3byCinderella
i-Haklab passwd set
i-Haklab passwd new
i-Haklab show alltools
apt install <tool>
i-Haklab setuser
i-Haklab instatools
i-Haklab books
i-Haklab tutorials
i-Haklab QG
i-Haklab speedtest
apt remove i-haklab

¶¶ NetHunter Rootless
Install Kali NetHunter on any unrooted Android device without & fix sdcard problem

#nethunterrootless #TermuxToolx #termuxpackage #termuxtoolx

¶¶ NetHunter Rootless
Install Kali NetHunter on any unrooted Android device without & fix sdcard problem

#nethunterrootless #TermuxToolx #termuxpackage #termuxtoolx

📍termux-setup-storage
📍pkg install python
📍pkg install python2
📍pkg install git
📍git clone https://github.com/RJ-Shuvo/SETUP
📍cd SETUP
📍bash RJ-SETUP.sh
exit open termux again

📍pkg install wget
📍wget -O install-nethunter-termux https://offs.ec/2MceZWr
📍chmod +x install-nethunter-termux
./install-nethunter-termux
-------------------
📍nethunter kex passwd ( configure pass)
📍nethunter kex & (start Kali NetHunter Desktop)
📍nethunter kex stop ( stop Kali NetHunter Desktop)
📍nethunter -r (start Kali NetHunter cli as root)
📍nethunter -r kex (passwd configure the KeX password for root )
📍nethunter -r kex stop ( stop Kali NetHunter Desktop Experience root sessions )
📍sudo apt update && sudo apt full-upgrade -y

¶¶ Full link: https://www.kali.org/docs/nethunter/nethunter-rootless/

¶¶ Fix memory not showing (sdcard)

¶¶ Nethunter
sdcard not showing
¶¶ Open termux

If user is in termux home
📍nano ../usr/bin/nh
or
cd
cd usr
cd bin
📍nano nh

¶¶ Scroll down until you see

cmdline="proot \
--link2symlink \
-0 \
-r kali-arm64 \
-b /dev \
-b /proc \
-------------------------
¶¶ After -b /proc \
copy past -b storage/shared/:/sdcard \
-b /proc \
-b storage/shared/:/sdcard \

Ctrl o enter ctrl x to & save it
cd
cd ../..
cd sdcard
ls

#adapter #wifiadapter #monitormode #vif #kali #rooteddevice #nethunter #termux
⭕️⭕️ this is not AR9271 its fake but works
Wireless USB WiFi Adapter for Linux Kali Linux
150Mbps / 2.4ghz - b/g/n/
Antenna: 3 dBi
Model = ❌❌
Supports : Monitor mode & packet injection
plug & play for #linux #kali #nethunter

¶¶ Ebay : http://tinsy.me/RWBPbH

¶¶ Create A Fake Wifi Network /fake access points
#fakenetwork #fakeaccesspoints #wifi #mdk3
📍sudo su
📍airmon-ng check kill
📍airmon-ng start wlan1
📍mdk3 wlan1 b -s 1000
(this will create fake acess points )

📍mdk3 wlan1 b -n "kali linux " (single fake acess point

¶¶ To add from your own list

📍sudo apt-get install mdk3
📍sudo apt-get install aircrack-ng
📍sudo airmon-ng
📍sudo airmon-ng start wlan1
📍create a file kali.txt
kali1
kali2
kali3
kali4

¶¶ names you want to show up as wifi networks, and save it
📍sudo mdk3 wlan1 b -c 1 -f fake.txt

¶¶ WhSms
WhSms Tool is Useful for send Anonymously SMS with personalized text via termux.


apt update && apt upgrade
pkg install git -y
git clone https://github.com/WhBeatZ/WhSms
cd WhSms
chmod +x whsms.sh
bash whsms.sh
"Only one test text message is allowed per day.",

¶¶ cloudflair
CloudFlair is a tool to find origin servers of websites protected by CloudFlare

git clone https://github.com/christophetd/cloudflair.git
cd cloudflair
pip install -r requirements.txt
python cloudflair.py --help
python cloudflair.py myvulnerable.site

CloudFront

$ python cloudflair.py myvulnerable.site

¶¶ sparrow-wifi
sparrow-wifi - Graphical WiFi Analyzer for Linux

📍sudo pip3 install --upgrade pip
¶¶ On Ubuntu 20.04+ OR Kali 2020.3+
rather, use sudo apt-get install python3-pyqt5.qtchart

📍sudo apt-get install python3-pip gpsd gpsd-clients python3-tk python3-setuptools

📍sudo pip3 install QScintilla PyQtChart gps3 dronekit manuf python-dateutil numpy matplotlib

📍pip3 install --upgrade requests
📍sudo mv /usr/sbin/wpapcap2john /usr/local/bin
📍git clone https://github.com/ghostop14/sparrow-wifi
📍cd sparrow-wifi
📍sudo ./sparrow-wifi.py