And unfortunately, I have now received reports that specifically for A13 and A14 QPR1 it does not boot
I guess I'll have to drop the 5.4 ebpf backports and on-hold A15 QPR1 support until further notice 😓

One last poll before stable STRIX-Revived release
It's regarding 90hz, I have now made a hacky fix to it where fixes the brightness twitching as well as sudden brightness increases (especially when switching from 120 to 90)

However, it doesn't fix the green tint and weird gray colouring, but rather, makes it worse! As you lower the brightness with this fix in 90hz, it'll not lower, but actually be very greenish and washed colours. You can workaround that by disabling automatic brightness, set brightness to 50% or more and then lower the brightness only via extra dim feature.

So I'll give you guys 3 choices to vote for
1. Merge this fix and have you all work around it with extra dim
2. Do not merge this fix aka do nothing
3. Drop 90hz altogether

P.s: this applies for both STRIX-Revived and vbantom.
Poll will end in 24 hours..

Alrighty then!
You peeps have decided! 90Hz will be dropped!

STRIX-Revived STAGING update 20250106

* More changes to get A15 QPR1 supported while attempting to keep A13-A14 QPR1 support intact

All those whom previously reported to me that it doesn't boot for them would be very appreciated if they try this now ❤️

!! Rebased now on latest STRIX stable release to make sure that the cause of booting failure is not by any other changes

This will be the final attempt to get A15 QPR1 support without compromising support for <= A14
If it fails, then again I'll drop all changes and add "No A15 QPR1 support" as a known issue and prepare for stable release then

I have updated the build now, I rebased on the lastest STRIX stable release so that I can sanely make sure that the reason it doesn't boot is truly because of the A15 QPR1 changes
Please clear telegram cache and download again

Thanks for everyone who tested, but now I'm very certain that the A15 QPR1 changes are causing boot failure for A13 and A14 QPR1.

As such, I will now add "No A15 QPR1 support" as a known issue now

There now 👋
I'll still keep the staging builds up if any Pixelage 2.3 or Lineage 22.1 users or GSI users want it 👍

If everyone is not happy now then I will go sleep for a month

For those asking "Where is STRIX-Revived update sarrr???"
Read below ⬇️

Hey there!
Thanks for using my kernel! I appreciate it but unfortunately, the version that you have built inline with has an outdated KSU-Next that due to the recent repo deletion and recreation of the KernelSU-next repo, it's manager apk is now fully lost.

I can understand why you used, because I have picked the ebpf commits that are needed for A15 QPR1, but STRIX-Revived sources are currently going through heavy changes and is not ready at all for it to be considered stable. As such, I recommend you to switch to vantom kernel source, since aryan has now picked the bpf commits needed for A15 QPR1, while I take my time stabilizing stuff over at STRIX-Revived

https://github.com/PixelOS-Devices/kernel_xiaomi_sm6150

Thank you once again and I'm sorry about this, I want STRIX-Revived to be a perfect form which it isn't at this current time

This is my reply to https://t.me/donjohanliebert/31
The second paragraph is the most important for you all

STRIX Kernel Revived 20250112

"...is it too late to say Happy New Years?"

Changelog:
(From 20241225-Staging)
- Upstreamed exfat
- Switch default zram compressor to lz4 with optimizations from vantom
- Add sdfat for ROMs that may need it
(From 20241231-Staging)
- Fix Pulkit tree issue by offering it as a 3rd option after you choose OSS/AOSP dimensions during flashing (more info)
- Merged @xfirstnamelastname's 4.14.355+3 brickport Linux upstream (openela is eol sarr 😭)
Set kernel timer frequency to 312Hz
Imported many memory and zram optimizations
Added CASS for more battery consveration
Made kernel aggressively try to deep sleep quicker
140Mhz is now available as the lowest minimum GPU frequency
Dropped unused is_legacy_ebpf cmdline check (there's literally no ROMs that use this 💀)
Dropped 90Hz refresh rate as per poll
Switched to AOSP clang
....other stuff I may have forgotten
————————————————————
@ksunext - Next v1.0.3 (12272) (direct manager dl link) + SUSFS 1.5.3+ (direct module dl link)
Now you can freely set whether Magic Mount or OverlayFS (modules.img) module system to be used freely without bugging me for any issues you may occur with Magic Mount 😙
After finding out that the lineage maphide brings no tradeoffs or issues on MIUI, I have now merged the KSU-NEXT into KSU variant, now KSU variant has lineage maphide
Kernel Source (and a15-ksu for ksu changes)
❗️Known Issues
⚠️ Disclaimer
Credits:
lets be honest, the kernel is a pickfest dawg 😭

@itsshashanksp, @aryannn999, @unmoved21, @xfirstnamelastname and Jan for the fixes, tweaks and features from their kernels
@fiqri_ardyansyah for the kernel everyone loves ❤️

@rifsxd for KernelSU-Next
@real5ec1cff for bringing magic mount to KSU
@xfirstnamelastname for the lineage maphide and ksu hooks commits
@sidex15 for their SUSFS module
@simonpunk for SUSFS ❤️