📃CALL FOR PAPERS📊
"Synthesis and Sintering" invites you to submit high-quality research and review papers in English for possible publication in Issue 2 of the journal.
#submission
#synthesis
#sintering
https://www.synsint.com/index.php/synsint/about/submissions

Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites
By: Saber Haghgooye Shafagh🇨🇦, Shapour Jafargholinejad🇨🇦, Siyamak Javadian🇨🇦
SYNTHESIS AND SINTERING 1 (2021) 69–75
#Ultrahigh_temperature_ceramics
#Hot_pressing
#Microstructure
#Mechanical_properties
Check it out at https://www.synsint.com/synsint/article/view/24

Numerical investigation of solar collectors as a potential source for sintering of ZrB2
By: Mohammad Vajdi🇮🇷, Saeed Mohammad Bagheri🇮🇷, Farhad Sadegh Moghanlou🇮🇷, Amin Shams Khorrami🇨🇦
SYNTHESIS AND SINTERING 1 (2021) 76–84
#Sintering
#Solar_energy
#ZrB2
#Numerical_method
#Solar_receiver
Check it out at https://www.synsint.com/synsint/article/view/8

We are pleased to inform you that "ISSN Canada" has assigned the following ISSN (International Standard Serial Number) to the journal of “Synthesis and Sintering”:
🇨🇦 ISSN (Print): 2564-0186
🇨🇦 ISSN (Online): 2564-0194

We are pleased to inform you that “Synthesis and Sintering” provides all the essentials for a professional and modern journal such as DOI, Crossmark, Hyperlink to the website, Copyright statement, ISSN, and Open access license for the papers published in this journal.

Electrochemical evaluation of the hydroxyapatite coating synthesized on the AZ91 by electrophoretic deposition route
By: Arezoo Jangjoo Tazeh Kand🇮🇷, Fereshteh Afaghi🇮🇷, Arvin Taghizadeh Tabrizi🇮🇷, Hossein Aghajani🇮🇷, Hilal Demir Kivrak🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 85–91
#Hydroxyapatite_layer
#Magnesium_alloy
#Electrophoretic_deposition
#Electrochemical_impedance_spectroscopy
#Synthesis
Check it out at https://doi.org/10.53063/synsint.2021.1226

The effect of synthesized Cu2O on the microbial corrosion inhibition of urban sewer systems
By: Zahra Khademmodaresi🇮🇷, Fereshteh Bakhtiari🇮🇷, Mohammadmehdi Azizi🇺🇲
SYNTHESIS AND SINTERING 1 (2021) 92–98
#Microbial_corrosion
#Acidithiobacillus_thiooxidans
#Concrete_sewers
#Synthesized_cuprous_oxide
#Nanoparticles
Check it out at https://doi.org/10.53063/synsint.2021.1233

Pressureless sinterability study of ZrB2–SiC composites containing hexagonal BN and phenolic resin additives
By: Iman FarahBakhsh🇺🇸, Riccarda Antiochia🇮🇹, Ho Won Jang🇰🇷
SYNTHESIS AND SINTERING 1 (2021) 99–104
#Ultrahigh_temperature_ceramics
#Fractography
#Pressureless_sintering
#Densification
#BN_additive
Check it out at https://doi.org/10.53063/synsint.2021.1231

Direct catalytic production of dimethyl ether from CO and CO2: A review
By: Asieh Akhoondi🇮🇷, Ahmed I. Osman🇬🇧, Ali Alizadeh Eslami🇧🇪
SYNTHESIS AND SINTERING 1 (2021) 105–120
#Dimethyl_ether
#Direct_synthesis
#Catalyst
#Syngas
#CO2
#Methanol
Check it out at https://doi.org/10.53063/synsint.2021.1229

Corrosion and mechanical behavior evaluation of in-situ synthesized Cu-TiB2 nanocomposite
By: Hossein Aghajani🇮🇷, Seyed Ali Naziri Mehrabani🇹🇷, Arvin Taghizadeh Tabrizi🇮🇷, Falih Hussein Saddam🇮🇶
SYNTHESIS AND SINTERING 1 (2021) 121–126
#Nanocomposite
#Corrosion_behavior
#Cu_TiB2
#Surface_roughness
Check it out at https://doi.org/10.53063/synsint.2021.1228

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Issue 3” of the journal.

https://www.synsint.com

We are delighted to notify you that after the completion of the validation procedure by the “ISSN Canada”🇨🇦, ISSN 2564-0186 = Synthesis and sintering (Print) and ISSN 2564-0194 = Synthesis and sintering (Online) have been finalized in the “ISSN International Centre”.
Check them out at:
https://portal.issn.org/resource/ISSN/2564-0194
https://portal.issn.org/resource/ISSN-L/2564-0186
#issn

Wear behavior of self-propagating high-temperature synthesized Cu-TiO2 nanocomposites
By: Hossein Aghajani🇮🇷, Mohammad Roostaei🇮🇷, Shaya Sharif Javaherian🇮🇷, Arvin Taghizadeh Tabrizi🇮🇷, Ali Abdoli Silabi🇮🇷, Navid Farzam Mehr🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 127-134
#Wear_behavior
#Synthesis
#Thermodynamic
#Cu_TiO2
Check it out at https://doi.org/10.53063/synsint.2021.1332

The Journal of "Synthesis and Sintering", which is about six months old, is proud to announce that to date it has published articles by authors from fifteen countries (Turkey, Iran, Canada, South Korea, USA, India, Australia, Thailand, the United Kingdom, Vietnam, Belgium, Pakistan, Italy, Iraq and Germany). We sincerely thank all the researchers who trusted us and chose this journal to publish their valuable work.

Ab-initio study of paramagnetic defects in Mn and Cr doped transparent polycrystalline Al2O3 ceramics
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Zuhal Er🇹🇷, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 135–142
#DFT
#Transparent_ceramics
#Sintering
#Alumina
#Paramagnetic_ceramics
Check it out at https://doi.org/10.53063/synsint.2021.1340

Experimental investigation and parameter optimization of Cr2O3 atmospheric plasma spray nanocoatings
By: Seyedmahdi Hashemi🇺🇲, Nader Parvin🇮🇷, Zia Valefi🇮🇷, Soroush Parvizi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 143–150
#Cr2O3
#Ball_milling
#Nano
#Atmospheric_plasma_spray
#APS_parameter_optimization
#Ceramic_coating
Check it out at https://doi.org/10.53063/synsint.2021.1339

Advances in metal-based vanadate compound photocatalysts: synthesis, properties and applications
By: Asieh Akhoondi🇮🇷, Usisipho Feleni🇿🇦, Bhaskar Bethi🇮🇳, Azeez Olayiwola Idris🇿🇦, Akbar Hojjati-Najafabadi🇨🇳
SYNTHESIS AND SINTERING 1 (2021) 151–168
#Photocatalyst
#Synthesis
#Solar_energy
#Structure
#Visible_light
#Vanadium
Check it out at https://doi.org/10.53063/synsint.2021.1344

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part I: sintering and densification
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 169–175
#In_situ_TiAl
#Ti3AlC2_MAX_phase
#Spark_plasma_sintering
#DTT_graphs
#Densification
Check it out at https://doi.org/10.53063/synsint.2021.1347

Tribological behavior and mechanical properties of friction stir processed HDPE/Fe-Fe3O4 composites
By: Saeed Karimi🇮🇷, Seyed Mohammad Arab🇮🇷, Seyyed Reza Hosseini Zeidabadi🇮🇷, Sirus Javadpour🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 176–182
#Friction_stir_processing
#High_density_polyethylene
#Composite
#Tribological_behavior
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2021.1350

Sintered transparent polycrystalline ceramics: the next generation of fillers for clarity enhancement in corundum
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Ted Themelis🇹🇭, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 183–188
#Transparent_ceramics
#Heat_treatment
#Sapphire
#Transient_liquid_phase_sintering
#High_temperature_pressure
#High_pressure_high_temperature
Check it out at https://doi.org/10.53063/synsint.2021.1342