Development of cordierite-based glass-ceramics by slip casting through selecting the appropriate sintering conditions
By: Mohammad Javad Maleki🇮🇷, Hudsa Majidian🇮🇷, Sara Banijamali🇮🇷, Mohammed Zakeri🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 84–91
#Cordierite
#Glass_ceramic
#Slip_casting
#Sintering
Check it out at https://doi.org/10.53063/synsint.2022.22116

Effects of clay and fireclay addition on the properties of magnesia–forsterite–spinel refractories synthesized at different firing temperatures
By: E. Salahi🇮🇷, M. Ghaffari🇮🇷, A. Faeghinia🇮🇷, A. Rajabi🇲🇾
SYNTHESIS AND SINTERING 2 (2022) 92–98
#Magnesia
#Firing
#Clay
#Fireclay
#Refractories
#Synthesis
Check it out at https://doi.org/10.53063/synsint.2022.2280

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part IV: mechanical properties
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 2 (2022) 99–104
#SPS
#TiAl_Ti3AlC2
#Flexural_strength
#Hardness
#Fracture_toughness
Check it out at https://doi.org/10.53063/synsint.2022.22103

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in the 7th issue of the journal.

https://www.synsint.com

#research #highquality #paper #publication #submission

Influence of Al content on microstructure and optical transmittance of sol-gel dip-coated ZnO films
By: Mehdi Tonka🇹🇷, Feyza Guzelcimen🇹🇷, Nilgun Baydogan🇹🇷
SYNTHESIS AND SINTERING 2 (2022) 105–109
#Crystallinity
#Sol_gel
#Transparency
#Optical_properties
#ZnO
Check it out at https://doi.org/10.53063/synsint.2022.2396

Investigation of flame retardancy properties of polypropylene-colemanite and intumescent flame retardant additive blends
By: Merve Zakut🇹🇷, Nilgün Kızılcan🇹🇷
SYNTHESIS AND SINTERING 2 (2022) 110–119
#Flame
#Flame_retardancy
#Polypropylene
#Intumescent
#Colemanite
Check it out at https://doi.org/10.53063/synsint.2022.2397

Banana-peel derived activated carbon for microwave absorption at X-band frequency
By: Hojjatollah Soleimani🇮🇷, Jemilat Yetunde Yusuf🇲🇾, Hassan Soleimani🇲🇾, Lee Kean Chuan🇲🇾, Maziyar Sabet🇧🇳
SYNTHESIS AND SINTERING 2 (2022) 120–124
#Microwave_absorbing_materials
#Banana_Peel_activated_carbon
#Reflection_loss
#Porous_material
#Microwave_absorption_mechanism
Check it out at https://doi.org/10.53063/synsint.2022.2389

Effect of glass waste as a cement replacement on the mechanical properties of concrete
By: Sara Ahmadi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 125–130
#C_S_H_gel_synthesis
#Green_concrete
#Glass_waste
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2022.23120

On the synthesis and sintering behavior of a novel Mg-Ca alloy, Part I: Mechanical alloying
By: Parisa Golmohammadi🇮🇷, Fatemeh Saljooghi🇮🇷, Ahmad Bahmani🇮🇷, Nader Parvin🇮🇷, Behzad Nayebi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 131–137
#Mechanical_alloying
#Magnesium
#Crystallite_size
#Morphology
#Phase_analysis
Check it out at https://doi.org/10.53063/synsint.2022.23118

Role of SPS temperature and holding time on the properties of Ti3AlC2-doped TiAl composites
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 2 (2022) 138–145
#TiAl_Ti3AlC2_composites
#Relative_density
#Flexural_strength
#Hardness
#Fracture_toughness
Check it out at https://doi.org/10.53063/synsint.2022.2383

Optimum temperature, time and atmosphere of precursor pyrolysis for synthesis of B4C ceramics
By: Seyed Faridaddin Feiz🇮🇷, Leila Nikzad🇮🇷, Hudsa Majidian🇮🇷, Esmaeil Salahi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 146–150
#Ceramics
#B4C_synthesis
#Process_optimization
#Pyrolysis
#Atmosphere
Check it out at https://doi.org/10.53063/synsint.2022.23119

Important news: publishing the best articles in "Synthesis and Sintering"
Posted on:2022-11-28
Synsint Research Group, the publisher of Synthesis and Sintering, is proud to publish the best papers of the "11th International Conference on Materials Engineering and Metallurgy" in the fields of synthesis and sintering after quick reviewing. Also, to support young researchers and encourage them to improve the quality of their articles, scholarships will be awarded to three selected articles as follows:

1. First article: 30 million Rials
2. Second article: 20 million Rials
3. Third article: 10 million Rials

To know about the conditions and standards of writing an article for final publication in the journal, refer to the website at www.synsint.com.

Department of Advanced Materials and Renewable Energy, IROST

#iMat #conference2022

New strategies in the preparation of binary g-C3N4/MXene composites for visible-light-driven photocatalytic applications
By: Asieh Akhoondi🇮🇷, Mehrdad Mirzaei🇮🇷, Mostafa Y. Nassar🇪🇬, Zahra Sabaghian🇮🇷, Farshid Hatami🇮🇷, Mohammad Yusuf🇲🇾
SYNTHESIS AND SINTERING 2 (2022) 151–169
#Photocatalyst
#g_C3N4
#MXene
#Synthesis
#Nanocomposite
Check it out at https://doi.org/10.53063/synsint.2022.24121

Happy New Year
Synthesis and Sintering, which was launched in 2021, ended its mission in the second year with the regular publication of 56 peer-reviewed papers in 8 issues. We truly thank all the authors, readers, reviewers, and editorial board members who contributed to the journal's goals.
We are waiting to receive your valuable submissions in 2023.
https://www.synsint.com/

Synthesis and characterization of aluminum-yttrium perovskite powder using a co-precipitation technique
By: Sara Ahmadi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 170–175
#YAP
#Perovskite
#Chemical_synthesis
#Co_precipitation
#Aluminum_yttrium
Check it out at https://doi.org/10.53063/synsint.2022.24135

Non-catalytic applications of g-C3N4: A brief review
By: Milad Sakkaki🇮🇷, Seyed Mohammad Arab🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 176–180
#Graphitic_carbon_nitride_g_C3N4
#Cutting_tools
#Composite
#Non_catalytic_applications
Check it out at https://doi.org/10.53063/synsint.2022.24126

Synthesizability improvement of B4C ceramics by optimizing the process temperature and atmosphere
By: Seyed Faridaddin Feiz🇮🇷, Leila Nikzad🇮🇷, Hudsa Majidian🇮🇷, Esmaeil Salahi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 181–185
#Boron_carbide
#Synthesis
#Optimization
#Atmosphere
#XRD_analysis
Check it out at https://doi.org/10.53063/synsint.2022.24131

We are delighted to inform you that “Synthesis and Sintering” is now indexed in “SID”, the Scientific Information Database, established in 2013, with the goal of advancing and disseminating scientific knowledge, expanding and enhancing information services, accelerating scientific explorations, simplifying access of researchers to the latest information sources published in journals and research accomplishments, and ultimately enhancing the effectiveness of research in Iran.
Check it out at https://www.sid.ir/journal/36200/en
#indexing #journals

Recent advances in synthesis of ultra-high temperature ceramic matrix composites
By: Farrokhfar Valizadeh Harzand🇮🇷, Sahar Anzani🇮🇷, Aziz Babapoor🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 186–190
#Advanced_ceramics
#UHTCs
#Synthesis
#Sintering
#Coating
#Infiltration
Check it out at https://doi.org/10.53063/synsint.2022.2475

Oxidation response of ZrB2–SiC–ZrC composites prepared by spark plasma sintering
By: Mohsen Ghasilzadeh Jarvand🇮🇷, Zohre Balak🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 191–197
#Ultrahigh_temperature_ceramics
#Oxidation_behavior
#Spark_plasma_sintering
#Processing_parameters
#Additive_content
Check it out at https://doi.org/10.53063/synsint.2022.24134