Sintered transparent polycrystalline ceramics: the next generation of fillers for clarity enhancement in corundum
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Ted Themelis🇹🇭, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 183–188
#Transparent_ceramics
#Heat_treatment
#Sapphire
#Transient_liquid_phase_sintering
#High_temperature_pressure
#High_pressure_high_temperature
Check it out at https://doi.org/10.53063/synsint.2021.1342

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Issue 4” of the journal.

https://www.synsint.com

Thermodynamically study of phase formation of Ni-Ti-Si nanocomposites produced by self-propagating high-temperature synthesis method
By: Hossein Aghajani🇮🇷, Arvin Taghizadeh Tabrizi🇹🇷, Salva Arabpour Javadi🇮🇷, Mohammad Ehsan Taghizadeh Tabrizi🇮🇷, Aytak Homayouni🇮🇷, Sahand Behrangi🇨🇿
SYNTHESIS AND SINTERING 1 (2021) 189–196
#Thermodynamic
#Adiabatic_temperature
#Self_propagating_high_temperature_synthesis
#Phase_formation
Check it out at https://doi.org/10.53063/synsint.2021.1443

Sintering behavior and microwave dielectric properties of CaTi1-x(Nb1/2Al1/2)xO3
By: Akbar Khan🇵🇰, Asif Ali🇵🇰, Izaz Khan🇵🇰
SYNTHESIS AND SINTERING 1 (2021) 197–201
#Perovskite
#CaTiO3
#Microwave_dielectric_properties
Check it out at https://doi.org/10.53063/synsint.2021.1467

Challenges toward applying UHTC-based composite coating on graphite substrate by spark plasma sintering
By: Mehran Jaberi Zamharir🇮🇷, Mohammad Zakeri🇮🇷, Mansour Razavi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 202–210
#Carbon_materials
#Spark_plasma_sintering
#Ultrahigh_temperature_ceramics
#Protective_layer
#Thermal_expansion_coefficient
Check it out at https://doi.org/10.53063/synsint.2021.1452

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part II: phase evolution
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 211–215
#Spark_plasma_sintering
#TiAl
#Ti3AlC2
#Phase_analysis
#Rietveld_refinement
#Crystallite
Check it out at https://doi.org/10.53063/synsint.2021.1453

Microstructure and mechanical properties of Ti3SiC2 MAX phases sintered by hot pressing
By: Sheida Haji Amiri🇮🇷, Nasser Pourmohammadie Vafa🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 216–222
#MAX_phase
#Ti3SiC2
#Hot_pressing
#Microstructure
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2021.1472

Hydrogen evolution via noble metals based photocatalysts: A review
By: Asieh Akhoondi🇮🇷, Ankush Sharma🇮🇳, Dinesh Pathak🇮🇳, Mohammad Yusuf🇲🇾, Taye B. Demissie🇧🇼, Rui-tang Guo🇨🇳, Adnan Ali🇳🇬
SYNTHESIS AND SINTERING 1 (2021) 223–241
#Photocatalyst
#H2_production
#Semiconductor
#Visible_light
#Bandgap
#Synthesis
Check it out at https://doi.org/10.53063/synsint.2021.1468

Sol-gel zinc oxide nanoparticles: advances in synthesis and applications
By: Parisa Shafiee🇮🇷, Mehdi Reisi Nafchi🇮🇷, Sara Eskandarinezhad🇮🇷, Shirin Mahmoudi🇮🇷, Elahe Ahmadi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 242–254
#Zinc_oxide_nanoparticles
#Sol_gel_synthesis
#Applications_of_sol_gel_zinc_oxide
Check it out at https://doi.org/10.53063/synsint.2021.1477

Happy New Year
Synthesis and Sintering, which was launched in 2021, ended its mission in the first year with the regular publication of 28 peer-reviewed papers in 4 issues. We truly thank all the authors, readers, reviewers, and editorial board members who contributed to the journal's goals.
We are waiting to receive your valuable submissions in 2022.
https://www.synsint.com/

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Vol. 2, No. 1” of the journal.

https://www.synsint.com

Synthesis and sintering of Fe-32Mn-6Si shape memory alloys prepared by mechanical alloying
By: Ali Shamsipoor🇮🇷, Babak Mousavi🇮🇷, Mohammad Sadegh Shakeri🇵🇱
SYNTHESIS AND SINTERING 2 (2021) 1–8
#Shape_memory_alloys
#Mechanical_alloying
#Sintering
#Phase_transformation
#Martensite
Check it out at https://doi.org/10.53063/synsint.2022.2185

Molecular hydrogen production by radiolysis of water on the surface of nano-ZrO2 under the influence of gamma rays
By: Gunel Imanova🇦🇿
SYNTHESIS AND SINTERING 2 (2021) 9–13
#Hydrogen_generation
#Nano_zirconium_oxide
#Enthalpy
#Water_splitting
#γ_radiation
Check it out at https://doi.org/10.53063/synsint.2022.21105

Impact of bridging oxygens formation on optical properties of Fe3+ doped Li2O–Al2O3–SiO2–TiO2 glasses
By: Aida Faeghinia🇮🇷
SYNTHESIS AND SINTERING 2 (2021) 14–19
#UV_Vis_absorption_spectra
#Glass
#Short_range_order
#Bridging_oxygens_formation
#Optical_parameters
#Structural_chemistry
Check it out at https://doi.org/10.53063/synsint.2022.2179

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part III: microstructure
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 2 (2022) 20–25
#Microstructure
#SPS
#In_situ_synthesis
#TiAl_Ti3AlC2_composites
#SEM_EDS_analysis
Check it out at https://doi.org/10.53063/synsint.2022.2182

Performance of glucose, sucrose and cellulose as carbonaceous precursors for the synthesis of B4C powders
By: Seyed Faridaddin Feiz🇮🇷, Leila Nikzad🇮🇷, Hudsa Majidian🇮🇷, Esmaeil Salahi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 26–30
#Synthesis
#Boron_carbide
#Saccharide
#Boric_acid
#Glucose
#Precursor
Check it out at https://doi.org/10.53063/synsint.2022.21108

Oxidation-affected zone in the sintered ZrB2–SiC–HfB2 composites
By: Ebrahim Dodi🇮🇷, Zohre Balak🇮🇷, Hosein Kafashan🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 31–36
#UHTCs
#ZrB2_SiC_HfB2
#Oxidation_resistance
#SPS
#Oxide_layers
#SiC_depleted_area
Check it out at https://doi.org/10.53063/synsint.2022.21111

Recent advances in hydrogen production using MXenes-based metal sulfide photocatalysts
By: Asieh Akhoondi🇮🇷, Hadi Ghaebi🇮🇷, Lakshmanan Karuppasamy🇹🇼, Mohammed M. Rahman🇸🇦, Panneerselvam Sathishkumar🇮🇳
SYNTHESIS AND SINTERING 2 (2022) 37–54
#MXenes_based_metal_sulfide
#Photocatalyst
#H2_production
#Semiconductor
#Synthesis
Check it out at https://doi.org/10.53063/synsint.2022.21106

Examination of water uptake performance and mechanical properties of PLA/flax fiber biocomposites with the coupling agent
By: Ali Avci🇹🇷, Aysegul Akdogan Eker🇹🇷, Mustafa Bakkal🇹🇷, Mehmet Safa Bodur🇹🇷
SYNTHESIS AND SINTERING 2 (2022) 55–61
#Biocomposites
#Water_Uptake
#Flexural_Performance
Check it out at https://doi.org/10.53063/synsint.2022.22102

Ultrasonic properties of Ni–Fe–B4C cermets produced by tube furnace sintering
By: Vildan Özkan Bilici🇹🇷
SYNTHESIS AND SINTERING 2 (2022) 62–66
#Ultrasonic_properties
#Powder_metallurgy
#Cermets
Check it out at https://doi.org/10.53063/synsint.2022.2287

Reactive spark plasma sintering of ZrB2-TiC composites: Role of nano-sized carbon black additive
By: Hamid Istgaldi🇮🇷, Mehdi Mehrabian🇮🇷, Faramarz Kazemi🇮🇷, Behzad Nayebi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 67–77
#Spark_plasma_sintering
#Zirconium_diboride
#Titanium_carbide
#In_situ_synthesis
#Toughening_mechanism
Check it out at https://doi.org/10.53063/synsint.2022.22107