Ab-initio study of paramagnetic defects in Mn and Cr doped transparent polycrystalline Al2O3 ceramics
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Zuhal Er🇹🇷, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 135–142
#DFT
#Transparent_ceramics
#Sintering
#Alumina
#Paramagnetic_ceramics
Check it out at https://doi.org/10.53063/synsint.2021.1340

Experimental investigation and parameter optimization of Cr2O3 atmospheric plasma spray nanocoatings
By: Seyedmahdi Hashemi🇺🇲, Nader Parvin🇮🇷, Zia Valefi🇮🇷, Soroush Parvizi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 143–150
#Cr2O3
#Ball_milling
#Nano
#Atmospheric_plasma_spray
#APS_parameter_optimization
#Ceramic_coating
Check it out at https://doi.org/10.53063/synsint.2021.1339

Advances in metal-based vanadate compound photocatalysts: synthesis, properties and applications
By: Asieh Akhoondi🇮🇷, Usisipho Feleni🇿🇦, Bhaskar Bethi🇮🇳, Azeez Olayiwola Idris🇿🇦, Akbar Hojjati-Najafabadi🇨🇳
SYNTHESIS AND SINTERING 1 (2021) 151–168
#Photocatalyst
#Synthesis
#Solar_energy
#Structure
#Visible_light
#Vanadium
Check it out at https://doi.org/10.53063/synsint.2021.1344

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part I: sintering and densification
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 169–175
#In_situ_TiAl
#Ti3AlC2_MAX_phase
#Spark_plasma_sintering
#DTT_graphs
#Densification
Check it out at https://doi.org/10.53063/synsint.2021.1347

Tribological behavior and mechanical properties of friction stir processed HDPE/Fe-Fe3O4 composites
By: Saeed Karimi🇮🇷, Seyed Mohammad Arab🇮🇷, Seyyed Reza Hosseini Zeidabadi🇮🇷, Sirus Javadpour🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 176–182
#Friction_stir_processing
#High_density_polyethylene
#Composite
#Tribological_behavior
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2021.1350

Sintered transparent polycrystalline ceramics: the next generation of fillers for clarity enhancement in corundum
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Ted Themelis🇹🇭, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 183–188
#Transparent_ceramics
#Heat_treatment
#Sapphire
#Transient_liquid_phase_sintering
#High_temperature_pressure
#High_pressure_high_temperature
Check it out at https://doi.org/10.53063/synsint.2021.1342

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Issue 4” of the journal.

https://www.synsint.com

Thermodynamically study of phase formation of Ni-Ti-Si nanocomposites produced by self-propagating high-temperature synthesis method
By: Hossein Aghajani🇮🇷, Arvin Taghizadeh Tabrizi🇹🇷, Salva Arabpour Javadi🇮🇷, Mohammad Ehsan Taghizadeh Tabrizi🇮🇷, Aytak Homayouni🇮🇷, Sahand Behrangi🇨🇿
SYNTHESIS AND SINTERING 1 (2021) 189–196
#Thermodynamic
#Adiabatic_temperature
#Self_propagating_high_temperature_synthesis
#Phase_formation
Check it out at https://doi.org/10.53063/synsint.2021.1443

Sintering behavior and microwave dielectric properties of CaTi1-x(Nb1/2Al1/2)xO3
By: Akbar Khan🇵🇰, Asif Ali🇵🇰, Izaz Khan🇵🇰
SYNTHESIS AND SINTERING 1 (2021) 197–201
#Perovskite
#CaTiO3
#Microwave_dielectric_properties
Check it out at https://doi.org/10.53063/synsint.2021.1467

Challenges toward applying UHTC-based composite coating on graphite substrate by spark plasma sintering
By: Mehran Jaberi Zamharir🇮🇷, Mohammad Zakeri🇮🇷, Mansour Razavi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 202–210
#Carbon_materials
#Spark_plasma_sintering
#Ultrahigh_temperature_ceramics
#Protective_layer
#Thermal_expansion_coefficient
Check it out at https://doi.org/10.53063/synsint.2021.1452

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part II: phase evolution
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 211–215
#Spark_plasma_sintering
#TiAl
#Ti3AlC2
#Phase_analysis
#Rietveld_refinement
#Crystallite
Check it out at https://doi.org/10.53063/synsint.2021.1453

Microstructure and mechanical properties of Ti3SiC2 MAX phases sintered by hot pressing
By: Sheida Haji Amiri🇮🇷, Nasser Pourmohammadie Vafa🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 216–222
#MAX_phase
#Ti3SiC2
#Hot_pressing
#Microstructure
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2021.1472

Hydrogen evolution via noble metals based photocatalysts: A review
By: Asieh Akhoondi🇮🇷, Ankush Sharma🇮🇳, Dinesh Pathak🇮🇳, Mohammad Yusuf🇲🇾, Taye B. Demissie🇧🇼, Rui-tang Guo🇨🇳, Adnan Ali🇳🇬
SYNTHESIS AND SINTERING 1 (2021) 223–241
#Photocatalyst
#H2_production
#Semiconductor
#Visible_light
#Bandgap
#Synthesis
Check it out at https://doi.org/10.53063/synsint.2021.1468

Sol-gel zinc oxide nanoparticles: advances in synthesis and applications
By: Parisa Shafiee🇮🇷, Mehdi Reisi Nafchi🇮🇷, Sara Eskandarinezhad🇮🇷, Shirin Mahmoudi🇮🇷, Elahe Ahmadi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 242–254
#Zinc_oxide_nanoparticles
#Sol_gel_synthesis
#Applications_of_sol_gel_zinc_oxide
Check it out at https://doi.org/10.53063/synsint.2021.1477

Happy New Year
Synthesis and Sintering, which was launched in 2021, ended its mission in the first year with the regular publication of 28 peer-reviewed papers in 4 issues. We truly thank all the authors, readers, reviewers, and editorial board members who contributed to the journal's goals.
We are waiting to receive your valuable submissions in 2022.
https://www.synsint.com/

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Vol. 2, No. 1” of the journal.

https://www.synsint.com

Synthesis and sintering of Fe-32Mn-6Si shape memory alloys prepared by mechanical alloying
By: Ali Shamsipoor🇮🇷, Babak Mousavi🇮🇷, Mohammad Sadegh Shakeri🇵🇱
SYNTHESIS AND SINTERING 2 (2021) 1–8
#Shape_memory_alloys
#Mechanical_alloying
#Sintering
#Phase_transformation
#Martensite
Check it out at https://doi.org/10.53063/synsint.2022.2185

Molecular hydrogen production by radiolysis of water on the surface of nano-ZrO2 under the influence of gamma rays
By: Gunel Imanova🇦🇿
SYNTHESIS AND SINTERING 2 (2021) 9–13
#Hydrogen_generation
#Nano_zirconium_oxide
#Enthalpy
#Water_splitting
#γ_radiation
Check it out at https://doi.org/10.53063/synsint.2022.21105

Impact of bridging oxygens formation on optical properties of Fe3+ doped Li2O–Al2O3–SiO2–TiO2 glasses
By: Aida Faeghinia🇮🇷
SYNTHESIS AND SINTERING 2 (2021) 14–19
#UV_Vis_absorption_spectra
#Glass
#Short_range_order
#Bridging_oxygens_formation
#Optical_parameters
#Structural_chemistry
Check it out at https://doi.org/10.53063/synsint.2022.2179

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part III: microstructure
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 2 (2022) 20–25
#Microstructure
#SPS
#In_situ_synthesis
#TiAl_Ti3AlC2_composites
#SEM_EDS_analysis
Check it out at https://doi.org/10.53063/synsint.2022.2182

Performance of glucose, sucrose and cellulose as carbonaceous precursors for the synthesis of B4C powders
By: Seyed Faridaddin Feiz🇮🇷, Leila Nikzad🇮🇷, Hudsa Majidian🇮🇷, Esmaeil Salahi🇮🇷
SYNTHESIS AND SINTERING 2 (2022) 26–30
#Synthesis
#Boron_carbide
#Saccharide
#Boric_acid
#Glucose
#Precursor
Check it out at https://doi.org/10.53063/synsint.2022.21108