Wear behavior of self-propagating high-temperature synthesized Cu-TiO2 nanocomposites
By: Hossein Aghajani🇮🇷, Mohammad Roostaei🇮🇷, Shaya Sharif Javaherian🇮🇷, Arvin Taghizadeh Tabrizi🇮🇷, Ali Abdoli Silabi🇮🇷, Navid Farzam Mehr🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 127-134
#Wear_behavior
#Synthesis
#Thermodynamic
#Cu_TiO2
Check it out at https://doi.org/10.53063/synsint.2021.1332

The Journal of "Synthesis and Sintering", which is about six months old, is proud to announce that to date it has published articles by authors from fifteen countries (Turkey, Iran, Canada, South Korea, USA, India, Australia, Thailand, the United Kingdom, Vietnam, Belgium, Pakistan, Italy, Iraq and Germany). We sincerely thank all the researchers who trusted us and chose this journal to publish their valuable work.

Ab-initio study of paramagnetic defects in Mn and Cr doped transparent polycrystalline Al2O3 ceramics
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Zuhal Er🇹🇷, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 135–142
#DFT
#Transparent_ceramics
#Sintering
#Alumina
#Paramagnetic_ceramics
Check it out at https://doi.org/10.53063/synsint.2021.1340

Experimental investigation and parameter optimization of Cr2O3 atmospheric plasma spray nanocoatings
By: Seyedmahdi Hashemi🇺🇲, Nader Parvin🇮🇷, Zia Valefi🇮🇷, Soroush Parvizi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 143–150
#Cr2O3
#Ball_milling
#Nano
#Atmospheric_plasma_spray
#APS_parameter_optimization
#Ceramic_coating
Check it out at https://doi.org/10.53063/synsint.2021.1339

Advances in metal-based vanadate compound photocatalysts: synthesis, properties and applications
By: Asieh Akhoondi🇮🇷, Usisipho Feleni🇿🇦, Bhaskar Bethi🇮🇳, Azeez Olayiwola Idris🇿🇦, Akbar Hojjati-Najafabadi🇨🇳
SYNTHESIS AND SINTERING 1 (2021) 151–168
#Photocatalyst
#Synthesis
#Solar_energy
#Structure
#Visible_light
#Vanadium
Check it out at https://doi.org/10.53063/synsint.2021.1344

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part I: sintering and densification
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 169–175
#In_situ_TiAl
#Ti3AlC2_MAX_phase
#Spark_plasma_sintering
#DTT_graphs
#Densification
Check it out at https://doi.org/10.53063/synsint.2021.1347

Tribological behavior and mechanical properties of friction stir processed HDPE/Fe-Fe3O4 composites
By: Saeed Karimi🇮🇷, Seyed Mohammad Arab🇮🇷, Seyyed Reza Hosseini Zeidabadi🇮🇷, Sirus Javadpour🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 176–182
#Friction_stir_processing
#High_density_polyethylene
#Composite
#Tribological_behavior
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2021.1350

Sintered transparent polycrystalline ceramics: the next generation of fillers for clarity enhancement in corundum
By: Mubashir Mansoor🇹🇷, Mehya Mansoor🇹🇷, Maryam Mansoor🇹🇷, Ted Themelis🇹🇭, Filiz Çinar Şahin🇹🇷
SYNTHESIS AND SINTERING 1 (2021) 183–188
#Transparent_ceramics
#Heat_treatment
#Sapphire
#Transient_liquid_phase_sintering
#High_temperature_pressure
#High_pressure_high_temperature
Check it out at https://doi.org/10.53063/synsint.2021.1342

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Issue 4” of the journal.

https://www.synsint.com

Thermodynamically study of phase formation of Ni-Ti-Si nanocomposites produced by self-propagating high-temperature synthesis method
By: Hossein Aghajani🇮🇷, Arvin Taghizadeh Tabrizi🇹🇷, Salva Arabpour Javadi🇮🇷, Mohammad Ehsan Taghizadeh Tabrizi🇮🇷, Aytak Homayouni🇮🇷, Sahand Behrangi🇨🇿
SYNTHESIS AND SINTERING 1 (2021) 189–196
#Thermodynamic
#Adiabatic_temperature
#Self_propagating_high_temperature_synthesis
#Phase_formation
Check it out at https://doi.org/10.53063/synsint.2021.1443

Sintering behavior and microwave dielectric properties of CaTi1-x(Nb1/2Al1/2)xO3
By: Akbar Khan🇵🇰, Asif Ali🇵🇰, Izaz Khan🇵🇰
SYNTHESIS AND SINTERING 1 (2021) 197–201
#Perovskite
#CaTiO3
#Microwave_dielectric_properties
Check it out at https://doi.org/10.53063/synsint.2021.1467

Challenges toward applying UHTC-based composite coating on graphite substrate by spark plasma sintering
By: Mehran Jaberi Zamharir🇮🇷, Mohammad Zakeri🇮🇷, Mansour Razavi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 202–210
#Carbon_materials
#Spark_plasma_sintering
#Ultrahigh_temperature_ceramics
#Protective_layer
#Thermal_expansion_coefficient
Check it out at https://doi.org/10.53063/synsint.2021.1452

Role of Ti3AlC2 MAX phase on characteristics of in-situ synthesized TiAl intermetallics. Part II: phase evolution
By: Maryam Akhlaghi🇮🇷, Esmaeil Salahi🇮🇷, Seyed Ali Tayebifard🇮🇷, Gert Schmidt🇩🇪
SYNTHESIS AND SINTERING 1 (2021) 211–215
#Spark_plasma_sintering
#TiAl
#Ti3AlC2
#Phase_analysis
#Rietveld_refinement
#Crystallite
Check it out at https://doi.org/10.53063/synsint.2021.1453

Microstructure and mechanical properties of Ti3SiC2 MAX phases sintered by hot pressing
By: Sheida Haji Amiri🇮🇷, Nasser Pourmohammadie Vafa🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 216–222
#MAX_phase
#Ti3SiC2
#Hot_pressing
#Microstructure
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2021.1472

Hydrogen evolution via noble metals based photocatalysts: A review
By: Asieh Akhoondi🇮🇷, Ankush Sharma🇮🇳, Dinesh Pathak🇮🇳, Mohammad Yusuf🇲🇾, Taye B. Demissie🇧🇼, Rui-tang Guo🇨🇳, Adnan Ali🇳🇬
SYNTHESIS AND SINTERING 1 (2021) 223–241
#Photocatalyst
#H2_production
#Semiconductor
#Visible_light
#Bandgap
#Synthesis
Check it out at https://doi.org/10.53063/synsint.2021.1468

Sol-gel zinc oxide nanoparticles: advances in synthesis and applications
By: Parisa Shafiee🇮🇷, Mehdi Reisi Nafchi🇮🇷, Sara Eskandarinezhad🇮🇷, Shirin Mahmoudi🇮🇷, Elahe Ahmadi🇮🇷
SYNTHESIS AND SINTERING 1 (2021) 242–254
#Zinc_oxide_nanoparticles
#Sol_gel_synthesis
#Applications_of_sol_gel_zinc_oxide
Check it out at https://doi.org/10.53063/synsint.2021.1477

Happy New Year
Synthesis and Sintering, which was launched in 2021, ended its mission in the first year with the regular publication of 28 peer-reviewed papers in 4 issues. We truly thank all the authors, readers, reviewers, and editorial board members who contributed to the journal's goals.
We are waiting to receive your valuable submissions in 2022.
https://www.synsint.com/

CALL FOR PAPERS

"Synthesis and Sintering" invites you to submit high-quality research and review manuscripts for possible publication in “Vol. 2, No. 1” of the journal.

https://www.synsint.com

Synthesis and sintering of Fe-32Mn-6Si shape memory alloys prepared by mechanical alloying
By: Ali Shamsipoor🇮🇷, Babak Mousavi🇮🇷, Mohammad Sadegh Shakeri🇵🇱
SYNTHESIS AND SINTERING 2 (2021) 1–8
#Shape_memory_alloys
#Mechanical_alloying
#Sintering
#Phase_transformation
#Martensite
Check it out at https://doi.org/10.53063/synsint.2022.2185

Molecular hydrogen production by radiolysis of water on the surface of nano-ZrO2 under the influence of gamma rays
By: Gunel Imanova🇦🇿
SYNTHESIS AND SINTERING 2 (2021) 9–13
#Hydrogen_generation
#Nano_zirconium_oxide
#Enthalpy
#Water_splitting
#γ_radiation
Check it out at https://doi.org/10.53063/synsint.2022.21105

Impact of bridging oxygens formation on optical properties of Fe3+ doped Li2O–Al2O3–SiO2–TiO2 glasses
By: Aida Faeghinia🇮🇷
SYNTHESIS AND SINTERING 2 (2021) 14–19
#UV_Vis_absorption_spectra
#Glass
#Short_range_order
#Bridging_oxygens_formation
#Optical_parameters
#Structural_chemistry
Check it out at https://doi.org/10.53063/synsint.2022.2179