On the synthesis and sintering behavior of a novel Mg-Ca alloy, Part I: Mechanical alloying
By: Parisa Golmohammadi๐ฎ๐ท, Fatemeh Saljooghi๐ฎ๐ท, Ahmad Bahmani๐ฎ๐ท, Nader Parvin๐ฎ๐ท, Behzad Nayebi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 131โ137
#Mechanical_alloying
#Magnesium
#Crystallite_size
#Morphology
#Phase_analysis
Check it out at https://doi.org/10.53063/synsint.2022.23118
By: Parisa Golmohammadi๐ฎ๐ท, Fatemeh Saljooghi๐ฎ๐ท, Ahmad Bahmani๐ฎ๐ท, Nader Parvin๐ฎ๐ท, Behzad Nayebi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 131โ137
#Mechanical_alloying
#Magnesium
#Crystallite_size
#Morphology
#Phase_analysis
Check it out at https://doi.org/10.53063/synsint.2022.23118
Role of SPS temperature and holding time on the properties of Ti3AlC2-doped TiAl composites
By: Maryam Akhlaghi๐ฎ๐ท, Esmaeil Salahi๐ฎ๐ท, Seyed Ali Tayebifard๐ฎ๐ท, Gert Schmidt๐ฉ๐ช
SYNTHESIS AND SINTERING 2 (2022) 138โ145
#TiAl_Ti3AlC2_composites
#Relative_density
#Flexural_strength
#Hardness
#Fracture_toughness
Check it out at https://doi.org/10.53063/synsint.2022.2383
By: Maryam Akhlaghi๐ฎ๐ท, Esmaeil Salahi๐ฎ๐ท, Seyed Ali Tayebifard๐ฎ๐ท, Gert Schmidt๐ฉ๐ช
SYNTHESIS AND SINTERING 2 (2022) 138โ145
#TiAl_Ti3AlC2_composites
#Relative_density
#Flexural_strength
#Hardness
#Fracture_toughness
Check it out at https://doi.org/10.53063/synsint.2022.2383
Optimum temperature, time and atmosphere of precursor pyrolysis for synthesis of B4C ceramics
By: Seyed Faridaddin Feiz๐ฎ๐ท, Leila Nikzad๐ฎ๐ท, Hudsa Majidian๐ฎ๐ท, Esmaeil Salahi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 146โ150
#Ceramics
#B4C_synthesis
#Process_optimization
#Pyrolysis
#Atmosphere
Check it out at https://doi.org/10.53063/synsint.2022.23119
By: Seyed Faridaddin Feiz๐ฎ๐ท, Leila Nikzad๐ฎ๐ท, Hudsa Majidian๐ฎ๐ท, Esmaeil Salahi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 146โ150
#Ceramics
#B4C_synthesis
#Process_optimization
#Pyrolysis
#Atmosphere
Check it out at https://doi.org/10.53063/synsint.2022.23119
Important news: publishing the best articles in "Synthesis and Sintering"
Posted on:2022-11-28
Synsint Research Group, the publisher of Synthesis and Sintering, is proud to publish the best papers of the "11th International Conference on Materials Engineering and Metallurgy" in the fields of synthesis and sintering after quick reviewing. Also, to support young researchers and encourage them to improve the quality of their articles, scholarships will be awarded to three selected articles as follows:
1. First article: 30 million Rials
2. Second article: 20 million Rials
3. Third article: 10 million Rials
To know about the conditions and standards of writing an article for final publication in the journal, refer to the website at www.synsint.com.
Department of Advanced Materials and Renewable Energy, IROST
#iMat #conference2022
Posted on:2022-11-28
Synsint Research Group, the publisher of Synthesis and Sintering, is proud to publish the best papers of the "11th International Conference on Materials Engineering and Metallurgy" in the fields of synthesis and sintering after quick reviewing. Also, to support young researchers and encourage them to improve the quality of their articles, scholarships will be awarded to three selected articles as follows:
1. First article: 30 million Rials
2. Second article: 20 million Rials
3. Third article: 10 million Rials
To know about the conditions and standards of writing an article for final publication in the journal, refer to the website at www.synsint.com.
Department of Advanced Materials and Renewable Energy, IROST
#iMat #conference2022
New strategies in the preparation of binary g-C3N4/MXene composites for visible-light-driven photocatalytic applications
By: Asieh Akhoondi๐ฎ๐ท, Mehrdad Mirzaei๐ฎ๐ท, Mostafa Y. Nassar๐ช๐ฌ, Zahra Sabaghian๐ฎ๐ท, Farshid Hatami๐ฎ๐ท, Mohammad Yusuf๐ฒ๐พ
SYNTHESIS AND SINTERING 2 (2022) 151โ169
#Photocatalyst
#g_C3N4
#MXene
#Synthesis
#Nanocomposite
Check it out at https://doi.org/10.53063/synsint.2022.24121
By: Asieh Akhoondi๐ฎ๐ท, Mehrdad Mirzaei๐ฎ๐ท, Mostafa Y. Nassar๐ช๐ฌ, Zahra Sabaghian๐ฎ๐ท, Farshid Hatami๐ฎ๐ท, Mohammad Yusuf๐ฒ๐พ
SYNTHESIS AND SINTERING 2 (2022) 151โ169
#Photocatalyst
#g_C3N4
#MXene
#Synthesis
#Nanocomposite
Check it out at https://doi.org/10.53063/synsint.2022.24121
Happy New Year
Synthesis and Sintering, which was launched in 2021, ended its mission in the second year with the regular publication of 56 peer-reviewed papers in 8 issues. We truly thank all the authors, readers, reviewers, and editorial board members who contributed to the journal's goals.
We are waiting to receive your valuable submissions in 2023.
https://www.synsint.com/
Synthesis and Sintering, which was launched in 2021, ended its mission in the second year with the regular publication of 56 peer-reviewed papers in 8 issues. We truly thank all the authors, readers, reviewers, and editorial board members who contributed to the journal's goals.
We are waiting to receive your valuable submissions in 2023.
https://www.synsint.com/
Synthesis and characterization of aluminum-yttrium perovskite powder using a co-precipitation technique
By: Sara Ahmadi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 170โ175
#YAP
#Perovskite
#Chemical_synthesis
#Co_precipitation
#Aluminum_yttrium
Check it out at https://doi.org/10.53063/synsint.2022.24135
By: Sara Ahmadi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 170โ175
#YAP
#Perovskite
#Chemical_synthesis
#Co_precipitation
#Aluminum_yttrium
Check it out at https://doi.org/10.53063/synsint.2022.24135
Non-catalytic applications of g-C3N4: A brief review
By: Milad Sakkaki๐ฎ๐ท, Seyed Mohammad Arab๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 176โ180
#Graphitic_carbon_nitride_g_C3N4
#Cutting_tools
#Composite
#Non_catalytic_applications
Check it out at https://doi.org/10.53063/synsint.2022.24126
By: Milad Sakkaki๐ฎ๐ท, Seyed Mohammad Arab๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 176โ180
#Graphitic_carbon_nitride_g_C3N4
#Cutting_tools
#Composite
#Non_catalytic_applications
Check it out at https://doi.org/10.53063/synsint.2022.24126
Synthesizability improvement of B4C ceramics by optimizing the process temperature and atmosphere
By: Seyed Faridaddin Feiz๐ฎ๐ท, Leila Nikzad๐ฎ๐ท, Hudsa Majidian๐ฎ๐ท, Esmaeil Salahi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 181โ185
#Boron_carbide
#Synthesis
#Optimization
#Atmosphere
#XRD_analysis
Check it out at https://doi.org/10.53063/synsint.2022.24131
By: Seyed Faridaddin Feiz๐ฎ๐ท, Leila Nikzad๐ฎ๐ท, Hudsa Majidian๐ฎ๐ท, Esmaeil Salahi๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 181โ185
#Boron_carbide
#Synthesis
#Optimization
#Atmosphere
#XRD_analysis
Check it out at https://doi.org/10.53063/synsint.2022.24131
We are delighted to inform you that โSynthesis and Sinteringโ is now indexed in โSIDโ, the Scientific Information Database, established in 2013, with the goal of advancing and disseminating scientific knowledge, expanding and enhancing information services, accelerating scientific explorations, simplifying access of researchers to the latest information sources published in journals and research accomplishments, and ultimately enhancing the effectiveness of research in Iran.
Check it out at https://www.sid.ir/journal/36200/en
#indexing #journals
Check it out at https://www.sid.ir/journal/36200/en
#indexing #journals
Recent advances in synthesis of ultra-high temperature ceramic matrix composites
By: Farrokhfar Valizadeh Harzand๐ฎ๐ท, Sahar Anzani๐ฎ๐ท, Aziz Babapoor๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 186โ190
#Advanced_ceramics
#UHTCs
#Synthesis
#Sintering
#Coating
#Infiltration
Check it out at https://doi.org/10.53063/synsint.2022.2475
By: Farrokhfar Valizadeh Harzand๐ฎ๐ท, Sahar Anzani๐ฎ๐ท, Aziz Babapoor๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 186โ190
#Advanced_ceramics
#UHTCs
#Synthesis
#Sintering
#Coating
#Infiltration
Check it out at https://doi.org/10.53063/synsint.2022.2475
Oxidation response of ZrB2โSiCโZrC composites prepared by spark plasma sintering
By: Mohsen Ghasilzadeh Jarvand๐ฎ๐ท, Zohre Balak๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 191โ197
#Ultrahigh_temperature_ceramics
#Oxidation_behavior
#Spark_plasma_sintering
#Processing_parameters
#Additive_content
Check it out at https://doi.org/10.53063/synsint.2022.24134
By: Mohsen Ghasilzadeh Jarvand๐ฎ๐ท, Zohre Balak๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 191โ197
#Ultrahigh_temperature_ceramics
#Oxidation_behavior
#Spark_plasma_sintering
#Processing_parameters
#Additive_content
Check it out at https://doi.org/10.53063/synsint.2022.24134
Crystallization behavior and structural evaluation of cordierite base glass-ceramic in the presence of CaO and B2O3 additives
By: Zahra Shamohammadi Ghahsareh๐ฎ๐ท, Mohammad Rezvani๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 198โ205
#Glass_ceramic
#Cordierite
#Crystallization
#Heat_treatment
Check it out at https://doi.org/10.53063/synsint.2022.24136
By: Zahra Shamohammadi Ghahsareh๐ฎ๐ท, Mohammad Rezvani๐ฎ๐ท
SYNTHESIS AND SINTERING 2 (2022) 198โ205
#Glass_ceramic
#Cordierite
#Crystallization
#Heat_treatment
Check it out at https://doi.org/10.53063/synsint.2022.24136
CALL FOR PAPERS
Dear respected researchers,
Synthesis and Sintering invites you to submit high-quality research and review manuscripts for possible publication in the 3rd VOLUME of the journal.
The editorial team is planning a fast publication process for this volume and trying to consider a first decision within 3 days and a final decision within 30 days.
Yours sincerely,
Synthesis and Sintering
#research_paper #review_paper #fast_publication
Dear respected researchers,
Synthesis and Sintering invites you to submit high-quality research and review manuscripts for possible publication in the 3rd VOLUME of the journal.
The editorial team is planning a fast publication process for this volume and trying to consider a first decision within 3 days and a final decision within 30 days.
Yours sincerely,
Synthesis and Sintering
#research_paper #review_paper #fast_publication
Happy International Women's Day
Synthesis and Sintering hereby thanks the extraordinary efforts of all the women who have contributed to the growth of the journal.
Especially, from the female editorial board members of the journal, including Prof. Nilgun Baydogan, Prof. Zohre Ahmadi, Prof. Sahar Zinatloo-Ajabshir, Dr. Gunel Imanova, Dr. Tatiana Safronova, Dr. Fatemeh Sadat Torknik, Dr. Mariam Ameen, Prof. Lidija ฤurkoviฤ, and Dr. Donatella Giuranno who kindly helped us in achieving the goals and ideals of the journal.
Exclusively, from Mrs. Asieh Akhoondi, who played a key role in editing, copy-editing, and paginations of the papers with her precision, elegance, and art.
We also thank the female reviewers who helped improve the quality of the journals by providing constructive comments and the female authors who chose this journal to publish their scientific works.
https://www.synsint.com/
Synthesis and Sintering hereby thanks the extraordinary efforts of all the women who have contributed to the growth of the journal.
Especially, from the female editorial board members of the journal, including Prof. Nilgun Baydogan, Prof. Zohre Ahmadi, Prof. Sahar Zinatloo-Ajabshir, Dr. Gunel Imanova, Dr. Tatiana Safronova, Dr. Fatemeh Sadat Torknik, Dr. Mariam Ameen, Prof. Lidija ฤurkoviฤ, and Dr. Donatella Giuranno who kindly helped us in achieving the goals and ideals of the journal.
Exclusively, from Mrs. Asieh Akhoondi, who played a key role in editing, copy-editing, and paginations of the papers with her precision, elegance, and art.
We also thank the female reviewers who helped improve the quality of the journals by providing constructive comments and the female authors who chose this journal to publish their scientific works.
https://www.synsint.com/
The paper titled "Sintered transparent polycrystalline ceramics: the next generation of fillers for clarity enhancement in corundum" written by Mubashir Mansoor๐น๐ท, Mehya Mansoor๐น๐ท, Maryam Mansoor๐น๐ท, Ted Themelis๐น๐ญ, Filiz รinar ลahin๐น๐ท is featured by Japan Gem Society๐ฏ๐ต
Synthesis and Sintering sincerely congratulates the respected authors๐
Check the paper out at https://doi.org/10.53063/synsint.2021.1342
Synthesis and Sintering sincerely congratulates the respected authors๐
Check the paper out at https://doi.org/10.53063/synsint.2021.1342
Synthesis and sintering of SrTiO3โZnO ceramics: Role of ZnO content on microstructure and dielectric properties
By: Muhammad Kashif๐ต๐ฐ, Muhammad Salman Habib๐ต๐ฐ, Muhammad Asif Rafiq๐ต๐ฐ, Moaz Waqar๐ต๐ฐ๐ธ๐ฌ, Muhammad Asif Hussain๐ต๐ฐ, Ayesha Iqbal๐ต๐ฐ, Mehboob Ahmed Abbasi๐ต๐ฐ, Shahid Saeed๐ต๐ฐ
SYNTHESIS AND SINTERING 3 (2023) 1โ13
#Semiconductor
#Complex_impedance_spectroscopy
#Relaxation_time
#Hopping_conduction
#Sensors
Check it out at https://doi.org/10.53063/synsint.2023.31138
By: Muhammad Kashif๐ต๐ฐ, Muhammad Salman Habib๐ต๐ฐ, Muhammad Asif Rafiq๐ต๐ฐ, Moaz Waqar๐ต๐ฐ๐ธ๐ฌ, Muhammad Asif Hussain๐ต๐ฐ, Ayesha Iqbal๐ต๐ฐ, Mehboob Ahmed Abbasi๐ต๐ฐ, Shahid Saeed๐ต๐ฐ
SYNTHESIS AND SINTERING 3 (2023) 1โ13
#Semiconductor
#Complex_impedance_spectroscopy
#Relaxation_time
#Hopping_conduction
#Sensors
Check it out at https://doi.org/10.53063/synsint.2023.31138
Crystallization behavior and ionic conductivity of NASICON type glass-ceramics containing different amounts of B2O3
By: Banafsheh Zarabian๐ฎ๐ท, Bijan Eftekhari Yekta๐ฎ๐ท, Sara Banijamali๐ฎ๐ท
SYNTHESIS AND SINTERING 3 (2023) 14โ19
#Lithium_batteries
#NASICON_glass_ceramics
#Crystallization
#Ionic_conductivity
#Boron_oxide
Check it out at https://doi.org/10.53063/synsint.2023.31141
By: Banafsheh Zarabian๐ฎ๐ท, Bijan Eftekhari Yekta๐ฎ๐ท, Sara Banijamali๐ฎ๐ท
SYNTHESIS AND SINTERING 3 (2023) 14โ19
#Lithium_batteries
#NASICON_glass_ceramics
#Crystallization
#Ionic_conductivity
#Boron_oxide
Check it out at https://doi.org/10.53063/synsint.2023.31141
Recent advances in machine learning algorithms for sintering processes
By: Shahla Azizi๐น๐ท
SYNTHESIS AND SINTERING 3 (2023) 20โ27
#Machine_learning
#Neural_networks
#Sintering
#Classification
#Materials
Check it out at https://doi.org/10.53063/synsint.2023.31139
By: Shahla Azizi๐น๐ท
SYNTHESIS AND SINTERING 3 (2023) 20โ27
#Machine_learning
#Neural_networks
#Sintering
#Classification
#Materials
Check it out at https://doi.org/10.53063/synsint.2023.31139
New updates on vanadate compounds synthesis and visible-light-driven photocatalytic applications
By: Mehrdad Mirzaei๐ฎ๐ท, Asieh Akhoondi๐ฎ๐ท, Wael Hamd๐ฑ๐ง, Jorge Noรฉ Dรญaz de Leรณn๐ฒ๐ฝ, Rengaraj Selvaraj๐ด๐ฒ
SYNTHESIS AND SINTERING 3 (2023) 28โ45
#Photocatalyst
#Synthesis
#Solar_energy
#Vanadate_compound
#Nanocomposite
Check it out at https://doi.org/10.53063/synsint.2023.31132
By: Mehrdad Mirzaei๐ฎ๐ท, Asieh Akhoondi๐ฎ๐ท, Wael Hamd๐ฑ๐ง, Jorge Noรฉ Dรญaz de Leรณn๐ฒ๐ฝ, Rengaraj Selvaraj๐ด๐ฒ
SYNTHESIS AND SINTERING 3 (2023) 28โ45
#Photocatalyst
#Synthesis
#Solar_energy
#Vanadate_compound
#Nanocomposite
Check it out at https://doi.org/10.53063/synsint.2023.31132
Influence of TiN addition on densification behavior and mechanical properties of ZrB2 ceramics
By: Alain Shima๐จ๐พ, Masoud Kazemi๐ฎ๐ท
SYNTHESIS AND SINTERING 3 (2023) 46โ53
#ZrB2
#TiN
#Densification
#Sinterability
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2023.31133
By: Alain Shima๐จ๐พ, Masoud Kazemi๐ฎ๐ท
SYNTHESIS AND SINTERING 3 (2023) 46โ53
#ZrB2
#TiN
#Densification
#Sinterability
#Mechanical_properties
Check it out at https://doi.org/10.53063/synsint.2023.31133