#Mac #Beta
Version 5.9.0-3018
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3018
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
#Mac #Beta
Version 5.9.0-3019
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3019
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
#Mac #Beta
Version 5.9.0-3020
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3020
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
#Mac #Beta
Version 5.9.0-3021
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3021
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
#Mac #Beta
Version 5.9.0-3022
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3022
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
#Mac #Beta
Version 5.9.0-3023
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3023
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
#iOS #TestFlight
Surge 5 5.100.0 (3364) is ready to test on iOS.
What to Test:
5.14.0 RC1
- 细节修正与文案补全
Official Channel: @SurgeTestFlightFeed
Surge 5 5.100.0 (3364) is ready to test on iOS.
What to Test:
5.14.0 RC1
- 细节修正与文案补全
Official Channel: @SurgeTestFlightFeed
Forwarded from Surge TestFlight Feed
Surge Mac 5.9.0 与 iOS 5.14.0 已进入 RC 阶段，iOS 版本由于审核的一些离谱原因，默认图标更换为了 5.0 图标，如果想使用经典图标请手动修改。
#tvOS #TestFlight
Surge 5 5.100.0 (3365) is ready to test on tvOS.
What to Test:
5.14.0 RC1
Official Channel: @SurgeTestFlightFeed
Surge 5 5.100.0 (3365) is ready to test on tvOS.
What to Test:
5.14.0 RC1
Official Channel: @SurgeTestFlightFeed
#Mac #Beta
Version 5.9.0-3024
- Added
- The URL-REGEX rule now supports
- The shadowsocks protocol adds support for the
- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3024
- Added
pre-matching feature for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html- The URL-REGEX rule now supports
extended-matching tags.- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Allow the use of Ponte policy as an underlying proxy.
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
Official Channel: @SurgeTestFlightFeed
❤1
#Mac #Beta
Version 5.9.0-3025
### New Features
- Added pre-matching rules for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html
- Body Rewrite supports using JQ expressions to manipulate JSON.
- The shadowsocks protocol adds support for the
### Improvements
- The URL-REGEX rule now supports
- Allow the use of Ponte policy as an underlying proxy.
- Modify the termination logic of HTTP scripts. If a request needs to be interrupted, use $done({abort: true}). Other failures will not modify or terminate the request.
- Overall optimization and improvement of UDP forwarding.
### Bug Fixes
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
- Fix the issue of not being able to obtain system routes on macOS 12.
- Fix the issue where determining the existence of IPv6 might be incorrect in some cases.
- Fix the issue where an incorrect message might sometimes indicate that the proxy settings have been modified by another program.
- Other bug fixes.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3025
### New Features
- Added pre-matching rules for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html
- Body Rewrite supports using JQ expressions to manipulate JSON.
- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes### Improvements
- The URL-REGEX rule now supports
extended-matching tags.- Allow the use of Ponte policy as an underlying proxy.
- Modify the termination logic of HTTP scripts. If a request needs to be interrupted, use $done({abort: true}). Other failures will not modify or terminate the request.
- Overall optimization and improvement of UDP forwarding.
### Bug Fixes
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
- Fix the issue of not being able to obtain system routes on macOS 12.
- Fix the issue where determining the existence of IPv6 might be incorrect in some cases.
- Fix the issue where an incorrect message might sometimes indicate that the proxy settings have been modified by another program.
- Other bug fixes.
Official Channel: @SurgeTestFlightFeed
#iOS #TestFlight
Surge 5 5.100.0 (3366) is ready to test on iOS.
What to Test:
5.14.0 RC2
- 细节问题修正
Official Channel: @SurgeTestFlightFeed
Surge 5 5.100.0 (3366) is ready to test on iOS.
What to Test:
5.14.0 RC2
- 细节问题修正
Official Channel: @SurgeTestFlightFeed
#Mac #Release
Version 5.9.0-3025
### New Features
- Added pre-matching rules for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html
- Body Rewrite supports using JQ expressions to manipulate JSON.
- The shadowsocks protocol adds support for the
### Improvements
- The URL-REGEX rule now supports
- Allow the use of Ponte policy as an underlying proxy.
- Modify the termination logic of HTTP scripts. If a request needs to be interrupted, use $done({abort: true}). Other failures will not modify or terminate the request.
- Overall optimization and improvement of UDP forwarding.
### Bug Fixes
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
- Fix the issue of not being able to obtain system routes on macOS 12.
- Fix the issue where determining the existence of IPv6 might be incorrect in some cases.
- Fix the issue where an incorrect message might sometimes indicate that the proxy settings have been modified by another program.
- Other bug fixes.
Official Channel: @SurgeTestFlightFeed
Version 5.9.0-3025
### New Features
- Added pre-matching rules for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html
- Body Rewrite supports using JQ expressions to manipulate JSON.
- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes### Improvements
- The URL-REGEX rule now supports
extended-matching tags.- Allow the use of Ponte policy as an underlying proxy.
- Modify the termination logic of HTTP scripts. If a request needs to be interrupted, use $done({abort: true}). Other failures will not modify or terminate the request.
- Overall optimization and improvement of UDP forwarding.
### Bug Fixes
- Fix the issue where DNS requests cannot select the correct interface according to the routing table in enhanced mode.
- Fix the issue of not being able to obtain system routes on macOS 12.
- Fix the issue where determining the existence of IPv6 might be incorrect in some cases.
- Fix the issue where an incorrect message might sometimes indicate that the proxy settings have been modified by another program.
- Other bug fixes.
Official Channel: @SurgeTestFlightFeed
Nssurge
REJECT Policy · GitBook
#iOS #AppStore
Version 5.14.0
Release Date: 2024/11/1 10:25:09(UTC+08:00)
What’s New:
New Features
- Added pre-matching rules for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html
- Body Rewrite supports using JQ expressions to manipulate JSON.
- The shadowsocks protocol adds support for the
- Adapted icon mode for iOS 18.
- New Control Center control for HTTP capture.
- DNS now supports system search domain settings
- Added parameter proxy-restricted-to-lan to restrict the proxy to only accept devices from the same subnet
- When updating external resources, ETag will be recorded and sent; re-download will not be triggered if the resource has not changed
Improvements
- Overall optimization and improvement of UDP forwarding.
- The policy group list view supports configuring custom icons.
- Resolved issues with real-time display on iOS 18
- Optimized the display effect of policy group icons
- Improved HTTP engine compatibility with non-standard requests
- More explicit error prompts when Surge is activated without a network connection
- Enhanced error handling logic for encrypted DNS, retrying immediately upon encountering errors
- Added warning messages for excessive Host entries
- The URL-REGEX rule now supports
- Allow the use of Ponte policy as an underlying proxy.
Bug Fixes
- Fixed an issue where Control Center/home screen widgets would still show as active even when Surge was turned off
- Fixed a memory leak issue in encrypted DNS under certain errors
- Corrected subscription cycle constraint errors for new icons
- Other bug fixes
Official Channel: @SurgeTestFlightFeed
Version 5.14.0
Release Date: 2024/11/1 10:25:09(UTC+08:00)
What’s New:
New Features
- Added pre-matching rules for low-overhead request rejection. Please refer to the documentation for details. https://manual.nssurge.com/policy/reject.html
- Body Rewrite supports using JQ expressions to manipulate JSON.
- The shadowsocks protocol adds support for the
2022-blake3-aes-256-gcm and 2022-blake3-aes-128-gcm encryption modes- Adapted icon mode for iOS 18.
- New Control Center control for HTTP capture.
- DNS now supports system search domain settings
- Added parameter proxy-restricted-to-lan to restrict the proxy to only accept devices from the same subnet
- When updating external resources, ETag will be recorded and sent; re-download will not be triggered if the resource has not changed
Improvements
- Overall optimization and improvement of UDP forwarding.
- The policy group list view supports configuring custom icons.
- Resolved issues with real-time display on iOS 18
- Optimized the display effect of policy group icons
- Improved HTTP engine compatibility with non-standard requests
- More explicit error prompts when Surge is activated without a network connection
- Enhanced error handling logic for encrypted DNS, retrying immediately upon encountering errors
- Added warning messages for excessive Host entries
- The URL-REGEX rule now supports
extended-matching tags.- Allow the use of Ponte policy as an underlying proxy.
Bug Fixes
- Fixed an issue where Control Center/home screen widgets would still show as active even when Surge was turned off
- Fixed a memory leak issue in encrypted DNS under certain errors
- Corrected subscription cycle constraint errors for new icons
- Other bug fixes
Official Channel: @SurgeTestFlightFeed
Nssurge
REJECT Policy · GitBook
Forwarded from Surge TestFlight Feed
Surge Mac 5.9.0 版本已正式发布，iOS 与 tvOS 5.14.0 版本已在 App Store 正式发布。
Forwarded from Surge TestFlight Feed
Surge iOS Beta 更新日志
- 脚本编辑页面支持传入 $argument
- 在脚本列表页面执行脚本也会传入 $argument 的内容了
- 脚本的 $trigger 参数新增 "editor" 和 "http-api" 两个来源
- 修正 iOS 16 下 WireGuard 可能无法使用的问题
- 修正部分代理协议的流量统计中，未计算上传的 UDP 流量的问题
- 脚本编辑页面支持传入 $argument
- 在脚本列表页面执行脚本也会传入 $argument 的内容了
- 脚本的 $trigger 参数新增 "editor" 和 "http-api" 两个来源
- 修正 iOS 16 下 WireGuard 可能无法使用的问题
- 修正部分代理协议的流量统计中，未计算上传的 UDP 流量的问题
#iOS #TestFlight
Surge 5 5.100.0 (3370) is ready to test on iOS.
What to Test:
- 脚本编辑页面支持传入 $argument
- 在脚本列表页面执行脚本也会传入 $argument 的内容了
- 脚本的 $trigger 参数新增 "editor" 和 "http-api" 两个来源
- 修正 iOS 16 下 WireGuard 可能无法使用的问题
- 修正部分代理协议的流量统计中，未计算上传的 UDP 流量的问题
Official Channel: @SurgeTestFlightFeed
Surge 5 5.100.0 (3370) is ready to test on iOS.
What to Test:
- 脚本编辑页面支持传入 $argument
- 在脚本列表页面执行脚本也会传入 $argument 的内容了
- 脚本的 $trigger 参数新增 "editor" 和 "http-api" 两个来源
- 修正 iOS 16 下 WireGuard 可能无法使用的问题
- 修正部分代理协议的流量统计中，未计算上传的 UDP 流量的问题
Official Channel: @SurgeTestFlightFeed
Forwarded from Surge TestFlight Feed
补充
- HTTP API /scripting/evaluate 新增 argument 参数
- HTTP API /scripting/evaluate 新增 argument 参数
Forwarded from Surge TestFlight Feed
提示
我们的客服邮箱 support@nssurge.com 向 @icloud.com 域所回复的邮件，最近几日经常被拒绝，原因不明，如需联系请换用其他邮箱，请见谅。
我们的客服邮箱 support@nssurge.com 向 @icloud.com 域所回复的邮件，最近几日经常被拒绝，原因不明，如需联系请换用其他邮箱，请见谅。