Draculad by MangoIV
QMK-powered 34-36 key split keyboard
Features
* 36 keys, two of them can be replaced by rotary encoders making it support 34-36 keys and 2-4 encoders.
* Bright RGB Underglow with WS2812b LEDs
* One SSD1306 OLED per side
* Support for the pimoroni trackball
powered by QMK-firmware (Firmware has been merged and can be found on the QMK master)
* Aggressive pinky stagger similar to the Kyria but with a slightly alternative thumb cluster to raise comfort for large hands
* Support for MX and Kailh choc v1 switches
* Files for fr4 plate and acrylic bottom plate as well as OLED window
#choc • #mx • #promicro • #qmk • #trackbal • #display • #oled • #encoder • #rgb • #34key • #36key
QMK-powered 34-36 key split keyboard
Features
* 36 keys, two of them can be replaced by rotary encoders making it support 34-36 keys and 2-4 encoders.
* Bright RGB Underglow with WS2812b LEDs
* One SSD1306 OLED per side
* Support for the pimoroni trackball
powered by QMK-firmware (Firmware has been merged and can be found on the QMK master)
* Aggressive pinky stagger similar to the Kyria but with a slightly alternative thumb cluster to raise comfort for large hands
* Support for MX and Kailh choc v1 switches
* Files for fr4 plate and acrylic bottom plate as well as OLED window
#choc • #mx • #promicro • #qmk • #trackbal • #display • #oled • #encoder • #rgb • #34key • #36key
Nijuni by krikun98
The Nijuni (formerly known as the RT-22) is a 44-key split keyboard inspired by the Jian (stagger, pinky and controller footprint) and the Jorne (thumb cluster and wiring).
It was originally conceived by DwarZ, however, V0.1 had a screw placement issue that restricted it to Kailh BOX-style switches. V0.2 is trouble-free, and prototypes have already been tested.
Features
* Wireless focus - battery footprint, power switches and no LEDs in sight
* Uses Jorne firmware - so QMK and ZMK support
* MX or Alps soldered or MX hotswap support in a single reversible PCB
* 6 column version also available for 100x150 PCB promos.
#mx • #alps • #promicro • #nrfmicro • #qmk • #zmk • #ble • #36key • #42key • #44key
The Nijuni (formerly known as the RT-22) is a 44-key split keyboard inspired by the Jian (stagger, pinky and controller footprint) and the Jorne (thumb cluster and wiring).
It was originally conceived by DwarZ, however, V0.1 had a screw placement issue that restricted it to Kailh BOX-style switches. V0.2 is trouble-free, and prototypes have already been tested.
Features
* Wireless focus - battery footprint, power switches and no LEDs in sight
* Uses Jorne firmware - so QMK and ZMK support
* MX or Alps soldered or MX hotswap support in a single reversible PCB
* 6 column version also available for 100x150 PCB promos.
#mx • #alps • #promicro • #nrfmicro • #qmk • #zmk • #ble • #36key • #42key • #44key
giraffe36 by sboysel
A 36 key split keyboard with "long-necked" thumb clusters. Wired, powered by Raspberry Pi Picos, diodeless. Inspirations include Ferris Sweep / sweep36, draculad, samoklava, piantor.
Goals
* Simplicity
* Declarative design (ergogen and specifically, my fork)
* 5x3+3 wired split
* Soldered MX to build plateless
* Diodeless
* Lowered thumb cluster comfortable to my hands
* To learn PCB design!
#mx • #rp2040 • #kmk • #diodeless • #36key
A 36 key split keyboard with "long-necked" thumb clusters. Wired, powered by Raspberry Pi Picos, diodeless. Inspirations include Ferris Sweep / sweep36, draculad, samoklava, piantor.
Goals
* Simplicity
* Declarative design (ergogen and specifically, my fork)
* 5x3+3 wired split
* Soldered MX to build plateless
* Diodeless
* Lowered thumb cluster comfortable to my hands
* To learn PCB design!
#mx • #rp2040 • #kmk • #diodeless • #36key
KLOR by GEIST
KLOR is a 36-42 key column-staggered split keyboard. It supports a per key RGB matrix, encoders, OLED displays, haptic feedback, speakers, a Pixart Paw3204 trackball, the SplitKB tenting puck and four different layouts, through break off parts.
Features
* Per key RGB matrix
* Encoders
* (kind of hidden) OLED displays
* Haptic feedback
* Speakers
* Pixart Paw3204 trackball
* Four different layouts, through brake off parts
* SplitKB tenting puck support.
KS-27 mod
#mx • #promicro • #kb2040 • #nrfmicro • #qmk • #zmk • #kmk • #ble • #encoder • #display • #oled • #haptic • #speaker • #trackball • #splay • #36key • #42key • #rgb
KLOR is a 36-42 key column-staggered split keyboard. It supports a per key RGB matrix, encoders, OLED displays, haptic feedback, speakers, a Pixart Paw3204 trackball, the SplitKB tenting puck and four different layouts, through break off parts.
Features
* Per key RGB matrix
* Encoders
* (kind of hidden) OLED displays
* Haptic feedback
* Speakers
* Pixart Paw3204 trackball
* Four different layouts, through brake off parts
* SplitKB tenting puck support.
KS-27 mod
#mx • #promicro • #kb2040 • #nrfmicro • #qmk • #zmk • #kmk • #ble • #encoder • #display • #oled • #haptic • #speaker • #trackball • #splay • #36key • #42key • #rgb
Musubi by wontaeyang
Musubi is a 38 key split keyboard using Kailh X switches and Seeeduino Xiao. This keyboard started with dust keyboard as a base and adjusted with customized layout and design elements from my favorite keyboards:
- dust by Hazel
- TOTEM by GEIST
- Dilemma by BastardKB
Features
* Reversible PCB
* Column stagger with splay
* 3x5 layout with 4 additional keys (three thumb, 1 pinky)
* Slim build (measured from keycap to bottom)
✓ without case 6.7 mm
✓ with case 9.7 mm
* Tenting puck support
#kailhx • #rp2040 • #xiao • #qmk • #splay • #38key
Musubi is a 38 key split keyboard using Kailh X switches and Seeeduino Xiao. This keyboard started with dust keyboard as a base and adjusted with customized layout and design elements from my favorite keyboards:
- dust by Hazel
- TOTEM by GEIST
- Dilemma by BastardKB
Features
* Reversible PCB
* Column stagger with splay
* 3x5 layout with 4 additional keys (three thumb, 1 pinky)
* Slim build (measured from keycap to bottom)
✓ without case 6.7 mm
✓ with case 9.7 mm
* Tenting puck support
#kailhx • #rp2040 • #xiao • #qmk • #splay • #38key
Ferricy by icyphox
Ferricy is a slightly modified version of the Ferris Sweep, sporting a more industrial look with sharper edges.
Features
* Ferricy MX based on the Sweep MX Bling.
* Ferricy Choc based on the Sweep Half-Swept.
* Tenting puck support has been removed (I have no use for it).
* Squared-off edges (plates modified accordingly).
* Larger holes in the PCB for M2 standoffs to pass through.
* The stupid Rust crab is gone.
#choc • #mx • #nrfmicro • #qmk • #zmk • #34key
Ferricy is a slightly modified version of the Ferris Sweep, sporting a more industrial look with sharper edges.
Features
* Ferricy MX based on the Sweep MX Bling.
* Ferricy Choc based on the Sweep Half-Swept.
* Tenting puck support has been removed (I have no use for it).
* Squared-off edges (plates modified accordingly).
* Larger holes in the PCB for M2 standoffs to pass through.
* The stupid Rust crab is gone.
#choc • #mx • #nrfmicro • #qmk • #zmk • #34key
Jorian840 by krikun98
44-key wireless split keyboard in a 100x100 mm PCB.
Two main versions are available with plenty of supported switches.
Plates and bottoms are to be cut from metal, acryllic or dual-layered plastic.
Features
* Wireless via Holyiot 18010 modules
* Fully-featured ZMK split
* Uses either 233350 310 mAh, LIR2032 40 mAh or CR2032 220 mAh (non-rechargeable) batteries
* Charger on/off switch (for non-rechargeable batteries)
* Proper case support
* Adjustable pinky stagger in the solder version
* Can be built with 7 or 8 mm. standoffs even with the rechargeable battery under the PCB
#mx • #alps • #omron • #ble •#zmk • #cr2032 • #44key
44-key wireless split keyboard in a 100x100 mm PCB.
Two main versions are available with plenty of supported switches.
Plates and bottoms are to be cut from metal, acryllic or dual-layered plastic.
Features
* Wireless via Holyiot 18010 modules
* Fully-featured ZMK split
* Uses either 233350 310 mAh, LIR2032 40 mAh or CR2032 220 mAh (non-rechargeable) batteries
* Charger on/off switch (for non-rechargeable batteries)
* Proper case support
* Adjustable pinky stagger in the solder version
* Can be built with 7 or 8 mm. standoffs even with the rechargeable battery under the PCB
#mx • #alps • #omron • #ble •#zmk • #cr2032 • #44key
РИСАТЕНО (RISATENO) by aroum
РИСАТЕНО (RISATENO) - created as a rethinking of ARTSEY for the Russian language. 10 keys, two for each finger.
The name is made up of letters on the main layer. The letters on the base layer are selected according to the frequency.
Features
* 10 keys, Kailh Choc V1 switches
* Choc spacing
* Direct pins
* Wireless(optional)
* Per switch RGB(optional)
* Power switch for wireless controllers (optional)
#choc • #promicro • #nrfmicro • #qmk • #zmk • #kle • #diodeless • #rgb • #10key
РИСАТЕНО (RISATENO) - created as a rethinking of ARTSEY for the Russian language. 10 keys, two for each finger.
The name is made up of letters on the main layer. The letters on the base layer are selected according to the frequency.
Features
* 10 keys, Kailh Choc V1 switches
* Choc spacing
* Direct pins
* Wireless(optional)
* Per switch RGB(optional)
* Power switch for wireless controllers (optional)
#choc • #promicro • #nrfmicro • #qmk • #zmk • #kle • #diodeless • #rgb • #10key
Clog v2 by smores56
The Clog V2 is a 34-key split keyboard with Pinky Clusters
Features
* Choc V1 switches
* Wireless only with Seeeduino Xiao BLE controllers
* Pinky clusters (top pinky keys on the sides)
* Splay (4° between middle and ring, 8° between ring and pinky)
* SplitKB puck support for tenting
* EVQWGD001 roller support
#choc • #xiao • #ble • #zmk • #splay • #encoder • #34key
The Clog V2 is a 34-key split keyboard with Pinky Clusters
Features
* Choc V1 switches
* Wireless only with Seeeduino Xiao BLE controllers
* Pinky clusters (top pinky keys on the sides)
* Splay (4° between middle and ring, 8° between ring and pinky)
* SplitKB puck support for tenting
* EVQWGD001 roller support
#choc • #xiao • #ble • #zmk • #splay • #encoder • #34key
🔥1
Pierce v2 by durken1
pierce 2.0 is a split modular wireless / semi-wireless 36 key column staggered keyboard. The design is inspired by Corne with more pinky stagger as well as only using 1u keycaps. It is possible to build a wireless version or a semi wireless version. If building the wireless version an additional reciever dongle is required. In the semi wireless version the wired half is also acting as a reciever for the wireless half. Both versions have full QMK support.
The semi wireless version has a built in reset circuit for connecting a PS/2 pointing device.
There are 3 different PCBs: wireless (reversible), wired (right) and reciever.
#alps • #mx • #choc • #qmk • #ble • #trackpoint • #dongle • #cr2032 • #36key
pierce 2.0 is a split modular wireless / semi-wireless 36 key column staggered keyboard. The design is inspired by Corne with more pinky stagger as well as only using 1u keycaps. It is possible to build a wireless version or a semi wireless version. If building the wireless version an additional reciever dongle is required. In the semi wireless version the wired half is also acting as a reciever for the wireless half. Both versions have full QMK support.
The semi wireless version has a built in reset circuit for connecting a PS/2 pointing device.
There are 3 different PCBs: wireless (reversible), wired (right) and reciever.
#alps • #mx • #choc • #qmk • #ble • #trackpoint • #dongle • #cr2032 • #36key
Jiran BLE Lite by Ladniy
Wireless ergo-split keyboard, based on nRF52840 module.
Lite means using a less components as possible in order to make the keyboard cheaper.
Features
* Powered by ZMK Firmware
* Based on Holyiot-18010 module
* Hot swappable PCB
* Support 5 pins MX & Kailh Mid-Height switches
* Capacious 18650 batteries
* Hardware power switch
* USB Type-C
Photo source
#mx • #ble • #zmk • #18650bat • #56key
Wireless ergo-split keyboard, based on nRF52840 module.
Lite means using a less components as possible in order to make the keyboard cheaper.
Features
* Powered by ZMK Firmware
* Based on Holyiot-18010 module
* Hot swappable PCB
* Support 5 pins MX & Kailh Mid-Height switches
* Capacious 18650 batteries
* Hardware power switch
* USB Type-C
Photo source
#mx • #ble • #zmk • #18650bat • #56key
Porcupine by anarion80
Porcupine is an autogenerated, ergonomic, split, 36-42 key, wired/wireless, columnar-staggered keyboard. It is designed to fit my needs and my hand, but it can be easily updated thanks to declarative design. It uses a ProMicro-compatible MCU board and supports both QMK and ZMK firmwares.
Features
* Autogenerated - PCB layout is declared using YAML config files and generated into PCB files using Ergogen tool (migrated to V4). Use my fork of it for added footprints.
* 3 variants (5x3+3; 5x3+4; 6x3+4)
* Wired or wireless
* Low-profile (using Kailh Choc switches)
* Reversible PCB (save cost in production)
* Pro-micro/Elite C/Proton C/nice!nano support
* Hot-Swap support
* SplitKB Tenting puck support.
* Uses KiKit to render PCB previews (see below)
* Uses KiBot to run DRC, create Gerber and Drill files for production (and Interactive BOM and 3d renders just for fun)
#choc • #promicro • #nrfmicro • #qmk • #zmk • #ble • #splay • #36key • #38key • #42key
Porcupine is an autogenerated, ergonomic, split, 36-42 key, wired/wireless, columnar-staggered keyboard. It is designed to fit my needs and my hand, but it can be easily updated thanks to declarative design. It uses a ProMicro-compatible MCU board and supports both QMK and ZMK firmwares.
Features
* Autogenerated - PCB layout is declared using YAML config files and generated into PCB files using Ergogen tool (migrated to V4). Use my fork of it for added footprints.
* 3 variants (5x3+3; 5x3+4; 6x3+4)
* Wired or wireless
* Low-profile (using Kailh Choc switches)
* Reversible PCB (save cost in production)
* Pro-micro/Elite C/Proton C/nice!nano support
* Hot-Swap support
* SplitKB Tenting puck support.
* Uses KiKit to render PCB previews (see below)
* Uses KiBot to run DRC, create Gerber and Drill files for production (and Interactive BOM and 3d renders just for fun)
#choc • #promicro • #nrfmicro • #qmk • #zmk • #ble • #splay • #36key • #38key • #42key
Oddball by atulloh
The Oddball is a split mechanical keyboard with an integrated trackball. While drawing inspiration from things like the Jian and the Dactyl Manuform, it is instead designed with a switch plate and PCB to give it durability, replicability, and a more utilitarian look. It has a relatively minimal key layout, typically with 39 keys in total. The PCB is reversible so it can be built with 0, 1 or theoretically 2 trackballs. Due to the height and angle of the optical sensor, and as an ergonomic bonus, it requires a tented case.
Features
* Split design
* 39 keys
* Trackball
* Dynamic CPI (trackball cursor speed)
* 5° typing angle
* 8.5° tenting angle
* Angled thumb clusters
* QMK firmware
Gallery
#mx • #promicro • #qmk • #trackball • #3d • #39key
The Oddball is a split mechanical keyboard with an integrated trackball. While drawing inspiration from things like the Jian and the Dactyl Manuform, it is instead designed with a switch plate and PCB to give it durability, replicability, and a more utilitarian look. It has a relatively minimal key layout, typically with 39 keys in total. The PCB is reversible so it can be built with 0, 1 or theoretically 2 trackballs. Due to the height and angle of the optical sensor, and as an ergonomic bonus, it requires a tented case.
Features
* Split design
* 39 keys
* Trackball
* Dynamic CPI (trackball cursor speed)
* 5° typing angle
* 8.5° tenting angle
* Angled thumb clusters
* QMK firmware
Gallery
#mx • #promicro • #qmk • #trackball • #3d • #39key
❤1🔥1