NR200P Max - Sanity Check

Hey! I've been preparing and gathering components for my very first PC build, exclusively for gaming purposes. I wanted to check if there are any compatibility concerns with the parts I've selected. I'm also open to any suggestions you may have regarding the components.

Any help/advice would be appreciated!

PCPartPicker Part List

​

|Type|Item|
|:-|:-|
|CPU|AMD Ryzen 7 7800X3D 4.2 GHz 8-Core Processor|
|CPU Cooler|Stock 280mm AIO|
|Motherboard|Asus ROG STRIX B650E-I GAMING WIFI Mini ITX AM5 Motherboard|
|Memory|G.Skill Trident Z5 Neo RGB 32 GB (2 x 16 GB) DDR5-6000 CL30|
|Storage|Samsung 980 Pro 1 TB M.2-2280 PCIe 4.0 X4 NVME X2|
|Video Card|NVIDIA Founders Edition GeForce RTX 4090 24 GB|
|Power Supply|V850 SFX GOLD 850 W 80+ Gold Certified Fully Modular SFX Power Supply|
|Top Fan|Lian Li Uni Fan SL 70.5 CFM 140 mm Fans 2-Pack|
|Bottom Fan|Noctua A12x15 PWM chromax.black.swap 55.44 CFM 120 mm|
|Bottom Fan|Noctua A12x15 PWM chromax.black.swap 55.44 CFM 120 mm|

https://redd.it/13yrt2y
@sffpc

Not convinced by the Ncase FF01. If it were slightly larger it would open up a ton of good air cooling options, but instead they are making the same mistake that SSUPD did.

It will only have a width of 9.8inches, meaning if you want to put an mATX board (with a width of 9.5 inches) then that only leaves like 7mm of space at the front! If they increased that by 10mm, you could at least fit slim fans at the front! The other configurations are similarly unconvincing for air cooling. They are making the same mistake SSUPD made here. Nobody cares that it's exactly that small. Mkae it a bit bigger and open up everyone's options. Kinda disappointing because I like air cooling a lot more, and I'm sure more people will switch back to air cooling in the future.

https://redd.it/13yty1f
@sffpc

Lian Li A4-H2O with air cooling?

I'm midway through ordering components for my new PC. My plan was to use the A4-H2O case with an AIO, but I'm having trouble finding a good cooler. I've ordered a Ryzen 7 7800X3D and a Gigabyte B650I Aorus Ultra with a pair of G.Skill Flare X5 dimms. The Arctic Liquid Freezer II is too thick and I just realized the EK Nucleus CR240 Dark isn't available here in the U.S. and shipping+tax from Europe is very expensive. It looks like all the other AIOs have RGB, which I don't want. I'm looking for a blackout aesthetic. I could just fork over the extra money for the Nucleus but I'm also seeing more and more issues with the X3D chips having issues. To add to that, I've been second guessing my decision to even spend that much on the CPU in the first place. I am now considering seeing if I can return the unopened 7800X3D and get a 7700 instead and maybe cool it with a low profile air cooler like the black Noctua NH-L9a or something similar. My questions are:

1) Can the NH-L9a effectively cool the 7700 under load (mostly gaming) without excessive throttling?

2) Can the NH-L9a fit in the B650I Aorus Ultra and A4-H2O with Flare X5 memory?

3) If not, is there another air cooler that can?

4) If still no, anybody know of a decent all black AIO that will fit in the A4?

5) In case anybody happens to know, will Newegg let me return the 7800X3D if it's unopened?

https://redd.it/13yv6vl
@sffpc

Any comments/advice on these parts for a new sff build?

Hi, i build my first pc 8 years ago (970gtx, i5-4960k), and I have decided its time to upgrade to new sffpc. After spending (way too many) hours researching, i have chosen the following parts:
https://pcpartpicker.com/list/3L7twc
And two of this screen in a dual setup:
Philips 27" gamingskærm Momentum 27M1N5500ZA/00 - Gamingskærme - Komplett.dk
I cant find the monitors on pcpartpicker which kinda worries me. But i am pretty sure they are compatible with the build.

Anyone have any comments/advice on the chosen parts and their compatibility that i should be aware of?

https://redd.it/13yujr7
@sffpc

SFF Case for safe bi-weekly transportation

Hello everyone!
I've recently been looking at potential safe builds for bi-weekly 30 mile car rides.
I've been mainly looking at mATX cases, as they have enough space to allow for the installation of anti-sag GPU brackets, which I'm not sure is exactly safer than installing the GPU vertically or in any other non-conventional way. So, if you have some experience with that, I'd appreciate it if you could help.
My current pick is the ASUS Prime AP201, which looks like it could comfortably fit a 6950XT. I'd be willing to switch to ITX if it actually provides any extra safety for the GPU, which is my main concern with this whole thing. Keeping that in mind, if anyone has any recommendations for a safer case or any tips that might help with minimizing the risk of component failure, I'd greatly appreciate the help.

https://redd.it/13yt8ql
@sffpc

AsRock shows DeskMeet and DeskSlim for AM5 65W, pricing TBD
https://www.tomshardware.com/news/asrock-shows-2023-deskmeet-and-deskslim-pcs

https://redd.it/13ysydj
@sffpc

Building a smaller setup, would love advice
https://redd.it/13yur4m
@sffpc

Air Cooled Hyte Revolt 3

https://redd.it/13z15eu
@sffpc

SFF water cooling

Hello people of this forum I have many questions after looking on and off for months about pump and res that would fit my case.

I have a dan a4 H2o with a 12400f and an rx 6900 xt with this combo I keep running into the same issue I don’t know where to fit my pump and res. I don’t mind putting them with my cpu if I have too. Thanks so much to any replies!

https://redd.it/13z2eus
@sffpc

Hopefully the last build for a while

https://redd.it/13z3fuj
@sffpc