DAN A4 w/ 5600X & GTX 980

Hello dear SFF-Community!

[https://imgur.com/a/uVD5egU](https://imgur.com/a/uVD5egU)

​

[Front](https://preview.redd.it/ysgvfytgqzn61.jpg?width=4032&format=pjpg&auto=webp&s=08ee115324de61383290f342bd1495c3de723bd4)

I want to present to you my first ITX build which i chose to be in a DAN A4 v4.1 for portability!I had to wait about 2 months for everything to arrive and i am still waiting for my GPU (either RTX 3070 or RX 6700 XT).

Specs:

* CPU： AMD Ryzen 5 5600X
* Motherboard：Gigabyte B550i AORUS Pro
* RAM： Corsair Venegance 32 GB 3200 MHz
* Sata M.2：Samsung Evo 2TB M.2 Sata
* NVME M.2：Crucial P1 1TB
* Cooler：Noctua NH-9La chromaxxBlack
* FAN：Noctua NF-A9x14 HS-PWM (exhaut)
* POWER：Corsair SF600 Platinum
* GPU：Gigabyte Windforce GTX 980 (for now)

It was a lot of fun to build this machine and also quite complex with CM and MB installation :)

You can see i tried as best as i could to avoid a cable jam above the exhaust fan and the sleeved cables definetly helped! GPU cables are run trough the front where the 2.5 Inch drive would be to save some more space. Since my Gigabyte B550i doesn't feature a native Type-A header i had to buy a USB 3.0 to Type A adapter which works just fine and still fits perfectly (some bending included)

Still i have a problem with my Ryzen 5 5600X, which runs very hot in idle and IMO in games aswell.While using Discord and browsing sometimes my temps peak to 80°C and the fans kick in which is really annoying. Idling is usually around 60-65° C - gaming gets up to 80-84°C. You can see on the pictures i have installed a cardboard fan duct which seems to lowered the temps by almost 5°C - still a bit too high for my taste.

I re-applied the thermal paste 3 times already to lower the temps (Noctua paste used).Also i tried PBO with a negative offset of 20 but it still doesn't do much + it randomly crashes to a BSOD. Locking the cores to 4.5Ghz and 1.2V is stable but still the temps are high.**On similar builds i read temps of about 40-45°C idle and 60-70°C during gaming so please help me achieve those** **📷**Bios is up to date!

​

Still i am very satisfied with the small footprint and i do not regret anything \^\^

https://redd.it/m8hnku
@sffpc

NH-L12 Ghost S1 Edition left top corner scratched the case, any ideas?
https://redd.it/m8iuxf
@sffpc

K39 Riser Cable Build

Hi there currently having an issue with my new build. I was looking to get a riser cable for my k39 as i didnt get one with it. Any chance anyone know where i can get one that both the 360 dreege or maybe someone knows the size of a straight 180 dreege one that would fit if bent arround?

Thanks in advance

https://redd.it/m8ihxu
@sffpc

I never really liked the power adaptor cable on the streacom Da2, has anyone else experienced a short due....
https://redd.it/m8jnq4
@sffpc

Minimalist PC case Micro ATX

Looking for a minimalist PC case... I have an ATX Board but looking to switch it up to something smaller I love the Motif Monument case but I have a pcie 750 SSD and don’t think mini itx boards have 2 PCIE slots.... so if there’s a micro ATX case like the motif monument that would be great!

https://redd.it/m8kbfh
@sffpc

Finished my first ITX with the K77, loved this case!
https://www.reddit.com/gallery/m8mx8i

https://redd.it/m8mx8i
@sffpc

First PC build in the Velka 5
https://www.reddit.com/gallery/m8ogci

https://redd.it/m8ogci
@sffpc

Asus X570-i Strix work without heatsink over m.2?

I've been posting a decent bit the past few days about prepping for a velka 7 build. I currently have an MSI B550-i board, but with the velka 7 not having front i/o, it might be nice to get a board that has more of it. The Asus Strix looks great, but I'm also trying to see if putting a black ridge cooler with a 120mm underneath will work (I have vlp memory). I don't know a whole ton about motherboards, so I was hoping to get your opinion as somebody here has probably done something similar. Thanks again for all of this community's help, you're all amazing.

https://redd.it/m8ln5i
@sffpc

Did a fanswap. I think it goes well with the theme
https://redd.it/m8ri9l
@sffpc

My first build in 8 years, Custom loop inside a Lian Li TU150
https://redd.it/m8rvrp
@sffpc

Look! Cables set, part II
https://www.reddit.com/gallery/m8q17t

https://redd.it/m8q17t
@sffpc

Velka 7 Rev 2.0 + Team Red
https://www.reddit.com/gallery/m8v2h5

https://redd.it/m8v2h5
@sffpc

Few progress snaps of my first SFF build (don't worry full cinematic build video coming soon!)
https://www.reddit.com/gallery/m8uk7t

https://redd.it/m8uk7t
@sffpc

S4M w/ RTX 3070
https://redd.it/m8w27d
@sffpc

And suddenly, temps got even worse
https://redd.it/m8yv1f
@sffpc

Thoughts on why my video card fans aren't spinning while using this GPU adapter cable? I have a Nvidia 3060 ti
https://www.reddit.com/gallery/m8upsv

https://redd.it/m8upsv
@sffpc

Sold XTIA Xproto, got Streacom BC1 Mini instead!
https://redd.it/m8zkvo
@sffpc

Best AM4 Cooler That Fits in Dancase A4

So im running into a bit of trouble with my current build. I just picked up a DanCase A4 and just finished moving it from a Thermaltake Lanbox vf1000bws. Now, it seems that the cooler cant keep up in such a small space and I thought Id ask for peoples opinions on cooler options on here. Im running a Ryzen 5 3600 @ 3.9 GHz with a Noctua NH-L9a.

Im currently undervolted so I know its a cooler issue as well.

https://redd.it/m8yp4q
@sffpc

Need suggestions on building an HP Compaq 5750 rig

I recently inherited a bunch of HP Compaq 5750s and I would like to turn them into something usable for even at least light gaming.
These things are ancient: they come pre-installed with Windows XP and used the AMD Athlon 64 X2.

I don't mind replacing the motherboard and all, as long as it's something more modern and it won't involve modifying the case. Any suggestions?

https://redd.it/m910cf
@sffpc

Toaster Pics (My not so first SFF, Ncase M1, 5600X, 3060ti.)
https://www.reddit.com/gallery/m932ff

https://redd.it/m932ff
@sffpc

Experiences with Casekraken

I had bought a Casekraken case last year through unconventional means, I contacted them through Instagram and paid with PayPal as the other payment options were not available to me. Now they took forever to ship it, sure, that's fine, I didn't have many expectations of overnight shipping or anything.

However, I changed my mind and went with a Nr200P. So I contacted them again to see if I could cancel my order as it wasn't shipped yet, since then I got little reply, a short answer every couple weeks at best. Now it's march and I still have not received my money, or my case (which would be less favourable). I have contacted them on multiple occasions trying to get my money or at least a reply, I'm not heartless, if there's something real life holding you up that's absolutely fine, but I would like to know if you need more time.

They seemed like a reputable vendor and they are active in this subreddit and I can hear all of you thinking: "Just make a PayPal dispute" and ultimately I will, but I would much rather know what's holding you up and if anyone else has had any experiences with them.

https://redd.it/m93jr8
@sffpc