Modified K39 v2 - My entry for SFFPC meets build.gg contest
https://www.reddit.com/gallery/m6uom1
https://redd.it/m6uom1
@sffpc
https://www.reddit.com/gallery/m6uom1
https://redd.it/m6uom1
@sffpc
90% complete build feedback wanted. 5900x + 3808 custom loop in Ncase M1
https://www.reddit.com/gallery/m6z0rs
https://redd.it/m6z0rs
@sffpc
https://www.reddit.com/gallery/m6z0rs
https://redd.it/m6z0rs
@sffpc
Magnolia pc, SFFPC meets builds.gg entry
https://www.reddit.com/gallery/m70nxp
https://redd.it/m70nxp
@sffpc
https://www.reddit.com/gallery/m70nxp
https://redd.it/m70nxp
@sffpc
Fan Configurations for NH-U12A in a S620?
Heya. Recently built a 5800X/2080 Super into a Sliger S620 with an NH-U12A and was curious to see what other folks have been doing fan config wise. I tried rear exhaust with top intake and had okay temps (40C idle/72C on load). Switched to rear intake and top exhaust and idle temps were higher (43C / 74C load). I was thinking of adding a side exhaust, but that'd mean I can't use the windowed panel.
I suppose I could use the alternate setup for the PSU so I can fit a front fan, but then I couldn't use the cables. (they juuuust fit in this config.)
Anyways, I know the more popular cooler to use is the NH-D15S but wanted to keep things a bit less crowded aesthetically.
https://preview.redd.it/rf7pfupegln61.jpg?width=1711&format=pjpg&auto=webp&s=1a58a81801bbbd9a34e6ec4fae62e5d185306f01
https://redd.it/m713qh
@sffpc
Heya. Recently built a 5800X/2080 Super into a Sliger S620 with an NH-U12A and was curious to see what other folks have been doing fan config wise. I tried rear exhaust with top intake and had okay temps (40C idle/72C on load). Switched to rear intake and top exhaust and idle temps were higher (43C / 74C load). I was thinking of adding a side exhaust, but that'd mean I can't use the windowed panel.
I suppose I could use the alternate setup for the PSU so I can fit a front fan, but then I couldn't use the cables. (they juuuust fit in this config.)
Anyways, I know the more popular cooler to use is the NH-D15S but wanted to keep things a bit less crowded aesthetically.
https://preview.redd.it/rf7pfupegln61.jpg?width=1711&format=pjpg&auto=webp&s=1a58a81801bbbd9a34e6ec4fae62e5d185306f01
https://redd.it/m713qh
@sffpc
NCASE M1 Build and fan configuration testing
Hi,
not the best time to upgrade your system, but I couldn't resist.I already made a preview post about my ASUS Strix 3090 deshroud, but I wanted to show a bit more of my now finished build. I also uploaded a video of the deshrouding process, just a mostly raw uncut version though.
Specs:
|Mainboard|ASUS ROG CROSSHAIR VIII IMPACT|
|:-|:-|
|CPU|AMD Ryzen 9 5900X|
|GPU|ASUS GeForce RTX 3090 ROG STRIX OC WHITE|
|RAM|2x 16GB G.Skill Trident Z Neo 3800MHz, 14-16-16-36, (F4-3800C14D-32GTZN)|
|Power supply|Corsair SF750 Platinum 750W|
|CPU AiO|Alphacool Eisbaer LT 240|
|AiO Radiator Fan|2x Noctua A12x25|
|GPU Fan|2x Noctua A12x25|
|Storage|1x Samsung 960 EVO 1TB, 1x Samsung 970 EVO Plus 500GB|
|Case|NCASE M1 v6.1|
​
Inside
Top
Backside
Bottom, Fans slightly off center to better match the heat sink of the GPU
Side
Yes, the STRIX 3090 does not fit the NCASE M1. At least not without the use of a rotary tool.
But then it fits, no slim pci-e power connectors are necessary with a little cable managing.
even the front connectors are in place
​
I tested thermals with Fire Strike Ultra Graphics test 1 in a loop for at least 30 minutes with a period of roughly 5 minutes cool down afterwards. Logging was done with HWiNFO64. I set pump and CPU Radiator fans to a fixed RPM while changing the GPU fans in different fan configurations to match an 40db(A) noise level for comparison. Sadly the STRIX does not report RPM for the external fans, so for those only the % were logged.
Fire Strike Ultra settings for testing
Noise normalization to about 40db\(A\) from roughly 20cm
I tried the following configurations:
GPU 2x Noctua A12x25 Intake + CPU 2x Noctua A12x25 Intake
GPU 2x Noctua A12x25 Intake + CPU 2x Noctua A12x25 Exhaust
GPU 2x Noctua A12x25 Exhaust + CPU 2x Noctua A12x25 Exhaust
GPU 2x Noctua A14x25 Exhaust+ CPU 2x Noctua A12x25 Exhaust
I for some reason forgot to test GPU Exhaust and CPU Intake in this run, though I have tested it before and it didn't performe better than a full exhaust configuration.
As the GPU 2x Noctua A12x25 Exhaust + CPU 2x Noctua A12x25 Exhaust performed the best and furthermore the GPU 2x Noctua A12x25 Intake + CPU 2x Noctua A12x25 Exhaust crashed my system when I just closed Fire Strike due to an overheating of the motherboard and CPU, I didn't tested other configurations for the GPU 2x Noctua A14x25 than as Exhaust with the CPU also as Exhaust.
The Noctua A14x25 do not fit without grinding the fan's frame down on the inside where the ncase's mounting hardware for the side panel sits or removing said mounting brackets.
My custom profiles are fan curves for both CPU and GPU as well as an undervolt to
Hi,
not the best time to upgrade your system, but I couldn't resist.I already made a preview post about my ASUS Strix 3090 deshroud, but I wanted to show a bit more of my now finished build. I also uploaded a video of the deshrouding process, just a mostly raw uncut version though.
Specs:
|Mainboard|ASUS ROG CROSSHAIR VIII IMPACT|
|:-|:-|
|CPU|AMD Ryzen 9 5900X|
|GPU|ASUS GeForce RTX 3090 ROG STRIX OC WHITE|
|RAM|2x 16GB G.Skill Trident Z Neo 3800MHz, 14-16-16-36, (F4-3800C14D-32GTZN)|
|Power supply|Corsair SF750 Platinum 750W|
|CPU AiO|Alphacool Eisbaer LT 240|
|AiO Radiator Fan|2x Noctua A12x25|
|GPU Fan|2x Noctua A12x25|
|Storage|1x Samsung 960 EVO 1TB, 1x Samsung 970 EVO Plus 500GB|
|Case|NCASE M1 v6.1|
​
Inside
Top
Backside
Bottom, Fans slightly off center to better match the heat sink of the GPU
Side
Yes, the STRIX 3090 does not fit the NCASE M1. At least not without the use of a rotary tool.
But then it fits, no slim pci-e power connectors are necessary with a little cable managing.
even the front connectors are in place
​
I tested thermals with Fire Strike Ultra Graphics test 1 in a loop for at least 30 minutes with a period of roughly 5 minutes cool down afterwards. Logging was done with HWiNFO64. I set pump and CPU Radiator fans to a fixed RPM while changing the GPU fans in different fan configurations to match an 40db(A) noise level for comparison. Sadly the STRIX does not report RPM for the external fans, so for those only the % were logged.
Fire Strike Ultra settings for testing
Noise normalization to about 40db\(A\) from roughly 20cm
I tried the following configurations:
GPU 2x Noctua A12x25 Intake + CPU 2x Noctua A12x25 Intake
GPU 2x Noctua A12x25 Intake + CPU 2x Noctua A12x25 Exhaust
GPU 2x Noctua A12x25 Exhaust + CPU 2x Noctua A12x25 Exhaust
GPU 2x Noctua A14x25 Exhaust+ CPU 2x Noctua A12x25 Exhaust
I for some reason forgot to test GPU Exhaust and CPU Intake in this run, though I have tested it before and it didn't performe better than a full exhaust configuration.
As the GPU 2x Noctua A12x25 Exhaust + CPU 2x Noctua A12x25 Exhaust performed the best and furthermore the GPU 2x Noctua A12x25 Intake + CPU 2x Noctua A12x25 Exhaust crashed my system when I just closed Fire Strike due to an overheating of the motherboard and CPU, I didn't tested other configurations for the GPU 2x Noctua A14x25 than as Exhaust with the CPU also as Exhaust.
The Noctua A14x25 do not fit without grinding the fan's frame down on the inside where the ncase's mounting hardware for the side panel sits or removing said mounting brackets.
My custom profiles are fan curves for both CPU and GPU as well as an undervolt to
reddit
Asus Strix 3090 deshroud NCase M1 almost fits
Posted in r/sffpc by u/TaxTalis • 7 points and 5 comments
868mV at 1905Mhz Core Clock, +550Mhz RAM for the GPU.
Results, dT above ambient logged with a EVE Room
Thank you for reading, hope it helps, I'll try to answer any questions left unvoiced, but I won't take it apart for testing other configurations anymore, that whole process was a pain, thanks for your understanding!
https://redd.it/m734nc
@sffpc
Results, dT above ambient logged with a EVE Room
Thank you for reading, hope it helps, I'll try to answer any questions left unvoiced, but I won't take it apart for testing other configurations anymore, that whole process was a pain, thanks for your understanding!
https://redd.it/m734nc
@sffpc
NR200P + Fuma2 + MSI B550I + MSI RTX3080 Gaming X Trio
https://www.reddit.com/gallery/m74n7z
https://redd.it/m74n7z
@sffpc
https://www.reddit.com/gallery/m74n7z
https://redd.it/m74n7z
@sffpc
Are there any slim 140mm case fans with 140mm mounting holes?
Preferably 15mm or below. I did find the Thermaltake Luna 14 Slim LED, but it seems to be discontinued for years
https://redd.it/m74tb9
@sffpc
Preferably 15mm or below. I did find the Thermaltake Luna 14 Slim LED, but it seems to be discontinued for years
https://redd.it/m74tb9
@sffpc
reddit
Are there any slim 140mm case fans with 140mm mounting holes?
Preferably 15mm or below. I did find the Thermaltake Luna 14 Slim LED, but it seems to be discontinued for years
I’ve been playing a lot of Minecraft, and Valheim.
Thermals are pretty rad. Can’t complain for a first time pc build.
GPU: 30 - 56c
CPU: 50 - 78c
Built it before moving away for school in January. Here’s the parts list if anyone’s interested.
GPU: RTX 3090 FE
CPU: AMD 5800x
Case: Lian Ali TU-150 mini itx
CPU Cooler: Noctua NH-U12A
Mobo: Asus B550-I
Storage: Samsung 980 1TB M.2
Storage*: Seagate BarraCuda 1TB SSD
Memory: Crucial ballistics 32GB, 3200-DDR4
Power: Corsair SF 750w + plat
Case fans: 1xNoctua A12x25,
2xNoctua A12x15
[my pc pics](https://imgur.com/a/CnPgNoE/)
https://redd.it/m7aelp
@sffpc
Thermals are pretty rad. Can’t complain for a first time pc build.
GPU: 30 - 56c
CPU: 50 - 78c
Built it before moving away for school in January. Here’s the parts list if anyone’s interested.
GPU: RTX 3090 FE
CPU: AMD 5800x
Case: Lian Ali TU-150 mini itx
CPU Cooler: Noctua NH-U12A
Mobo: Asus B550-I
Storage: Samsung 980 1TB M.2
Storage*: Seagate BarraCuda 1TB SSD
Memory: Crucial ballistics 32GB, 3200-DDR4
Power: Corsair SF 750w + plat
Case fans: 1xNoctua A12x25,
2xNoctua A12x15
[my pc pics](https://imgur.com/a/CnPgNoE/)
https://redd.it/m7aelp
@sffpc
Imgur
Post with 1 views.
NR200P Custom Loop White Build Complete
https://www.reddit.com/gallery/m7c07g
https://redd.it/m7c07g
@sffpc
https://www.reddit.com/gallery/m7c07g
https://redd.it/m7c07g
@sffpc
Cooler Master NR200 3x240 radiators Water Cooling build.
First SFF build, came to NR200 from bq Dark Base 700.
What do You think guys?
Specs:
Motherboard: Asus X570 Crosshair VIII Impact [AM4\]
CPU: AMD Ryzen 9 5900X @ Curve Optimizer -30 [EK-Supremacy EVO RGB\]
RAM: 2x16GB 3200MHz CL14 G.Skill Trident Z RGB @ 3800 MHz CL16-16-16-32-48-319-1T, 1.39V
GPU: RTX 2080 Ti Founders Edition [EK WaterBlock\]
SSD1: Samsung 970 Evo Plus 1TB (Windows 10)
SSD2: 2x Crucial MX500 1TB [RAID 0\]
PSU: Cooler Master V850 SFX Gold [850 W\]
Case: Cooler Master MasterBox NR200 Black
Radiators : 2x XSPC 240x20mm, 1x Magicool G2 240x27mm
Fans: 4x Noctua NF-A12x15, 2x bq Silent Wings 3 120mm High-Speed
Pump: Laing DDC 3.25 DC - 1000 L/h
Tubing: EK ZMT 12/16
Had to cut one fan to fit RAM tabs.
PC without side radiator.
Different angle.
Clearance between GPU and bottom radiator is 1,5 cm. Had to take off audio cover to fit radiator.
PC with side radiator.
Shot from above.
Closed side panel.
Pump and reservoir \(IceMan NR200\). Had to cut 2 holes in case to get IN and OUT into PC.
I know this wall is garbage.
https://redd.it/m7bvd9
@sffpc
First SFF build, came to NR200 from bq Dark Base 700.
What do You think guys?
Specs:
Motherboard: Asus X570 Crosshair VIII Impact [AM4\]
CPU: AMD Ryzen 9 5900X @ Curve Optimizer -30 [EK-Supremacy EVO RGB\]
RAM: 2x16GB 3200MHz CL14 G.Skill Trident Z RGB @ 3800 MHz CL16-16-16-32-48-319-1T, 1.39V
GPU: RTX 2080 Ti Founders Edition [EK WaterBlock\]
SSD1: Samsung 970 Evo Plus 1TB (Windows 10)
SSD2: 2x Crucial MX500 1TB [RAID 0\]
PSU: Cooler Master V850 SFX Gold [850 W\]
Case: Cooler Master MasterBox NR200 Black
Radiators : 2x XSPC 240x20mm, 1x Magicool G2 240x27mm
Fans: 4x Noctua NF-A12x15, 2x bq Silent Wings 3 120mm High-Speed
Pump: Laing DDC 3.25 DC - 1000 L/h
Tubing: EK ZMT 12/16
Had to cut one fan to fit RAM tabs.
PC without side radiator.
Different angle.
Clearance between GPU and bottom radiator is 1,5 cm. Had to take off audio cover to fit radiator.
PC with side radiator.
Shot from above.
Closed side panel.
Pump and reservoir \(IceMan NR200\). Had to cut 2 holes in case to get IN and OUT into PC.
I know this wall is garbage.
https://redd.it/m7bvd9
@sffpc
Best small Antennas on Amazon?
Have tried 2 different sets and they’ve both been absolutely terrible. I’m about 2 rooms away from my router. Using my motherboard antenna is perfectly fine but I want something small and out of sight. Any recommendations? Don’t mind spending extra for really good ones.
https://redd.it/m7da5t
@sffpc
Have tried 2 different sets and they’ve both been absolutely terrible. I’m about 2 rooms away from my router. Using my motherboard antenna is perfectly fine but I want something small and out of sight. Any recommendations? Don’t mind spending extra for really good ones.
https://redd.it/m7da5t
@sffpc
reddit
Best small Antennas on Amazon?
Have tried 2 different sets and they’ve both been absolutely terrible. I’m about 2 rooms away from my router. Using my motherboard antenna is...
Which layout is most optimal for my custom mesh sandwich-style case? (the black rectangles are fans). And yes, I'm aware that air passed thru the radiator isn't fresh & cool.
https://redd.it/m7g3yy
@sffpc
https://redd.it/m7g3yy
@sffpc