My new ZZAW B3 Case compared to Corsair 680X.
https://www.reddit.com/gallery/m44gyh
https://redd.it/m44gyh
@sffpc
https://www.reddit.com/gallery/m44gyh
https://redd.it/m44gyh
@sffpc
CURV3D - Scratchbuild submission for BuildsGG SFFPC
https://www.reddit.com/gallery/m4e6c9
https://redd.it/m4e6c9
@sffpc
https://www.reddit.com/gallery/m4e6c9
https://redd.it/m4e6c9
@sffpc
Anyone have experience with a dual-fan to single-fan itx gpu cooler swap?
Hi all,
I'm looking to build an ultra-sff pc here in the near future (was thinking the size of a metalfish s3 or similar). Instead of trying to bother with the GPU market right now, I figured I would use my PNY 1660 that I have lying around as a back-up.
The good news is, my 1660 has an ITX PCB, but the bad news is, it's fitted with a dual fan cooler... I've done some digging into aftermarket, single-fan coolers - the Arctic Accelero models seem pretty promising, but they also add quite a bit of thickness to the card, enough to where it seems I may run into issues there as well.
Anyone run into similar issues and have any sort of solution?
https://redd.it/m4i5yz
@sffpc
Hi all,
I'm looking to build an ultra-sff pc here in the near future (was thinking the size of a metalfish s3 or similar). Instead of trying to bother with the GPU market right now, I figured I would use my PNY 1660 that I have lying around as a back-up.
The good news is, my 1660 has an ITX PCB, but the bad news is, it's fitted with a dual fan cooler... I've done some digging into aftermarket, single-fan coolers - the Arctic Accelero models seem pretty promising, but they also add quite a bit of thickness to the card, enough to where it seems I may run into issues there as well.
Anyone run into similar issues and have any sort of solution?
https://redd.it/m4i5yz
@sffpc
reddit
Anyone have experience with a dual-fan to single-fan itx gpu...
Hi all, I'm looking to build an ultra-sff pc here in the near future (was thinking the size of a metalfish s3 or similar). Instead of trying to...
How Do I Delete Alienware Off My M.2 NVME
Previously, I had an Alienware R11 that was slow as hell due to its SATA hard drive. So, I've purchased a "Sabrent Rocket 4 Plus M.2 NVME (1TB)" and used it over the other hard drive. However, now I've built my own FormD T1 PC and was wondering if anyone knows how to get rid of everything related to Dell/Alienware on my NVME ssd because their bloatwares carried over to my new PC regardless of having everything deleted (I believe I used Macrium Reflect).
https://redd.it/m4kof2
@sffpc
Previously, I had an Alienware R11 that was slow as hell due to its SATA hard drive. So, I've purchased a "Sabrent Rocket 4 Plus M.2 NVME (1TB)" and used it over the other hard drive. However, now I've built my own FormD T1 PC and was wondering if anyone knows how to get rid of everything related to Dell/Alienware on my NVME ssd because their bloatwares carried over to my new PC regardless of having everything deleted (I believe I used Macrium Reflect).
https://redd.it/m4kof2
@sffpc
reddit
How Do I Delete Alienware Off My M.2 NVME
Previously, I had an Alienware R11 that was slow as hell due to its SATA hard drive. So, I've purchased a "Sabrent Rocket 4 Plus M.2 NVME (1TB)"...
Cappuccino Cafe themed NCASE M1 build with PSlate custom cables - Future plan to Cerakote the side panels to match the color scheme.
https://redd.it/m4kxn5
@sffpc
https://redd.it/m4kxn5
@sffpc
id cooling se-224-xt, best budget cooler for NR200
https://www.reddit.com/gallery/m4m3tm
https://redd.it/m4m3tm
@sffpc
https://www.reddit.com/gallery/m4m3tm
https://redd.it/m4m3tm
@sffpc
Lian LI TU150 w/ 3090 ftw (yes it fits fine)
https://www.reddit.com/gallery/m4niee
https://redd.it/m4niee
@sffpc
https://www.reddit.com/gallery/m4niee
https://redd.it/m4niee
@sffpc
A Rare Sliger Cerberus Build (Carmine Red)
https://imgur.com/gallery/lm6trUw
https://redd.it/m4oa7k
@sffpc
https://imgur.com/gallery/lm6trUw
https://redd.it/m4oa7k
@sffpc
Imgur
Red Cerberus | Ryzen 5 3600 + RTX 3070 TUF OC
Post with 2 votes and 178 views. Tagged with pc builds, sffpc, pc master race, noctua, pcmr; Shared by iamerod. Red Cerberus | Ryzen 5 3600 + RTX 3070 TUF OC
iQUNIX ZX-1 based build for the Boss
SFF build for the Boss (*/spouse/*).
The case looks amazing and feels solid with no flex anywhere on the case. Slightly tinny when the magnets engage with the 3 removable covers. Lining up the upper panel with the USB/Audio ports is easy with a tool or two, but painful otherwise. The CPU cooler and fan choices based on suggestions from other users proved to be awesome.
I wish I was able to find more flexible PSU cables, cause the ones that came with this PSU was a pain to work with, and I had to remove the Scythe fan I'd initially installed at the bottom to make room for them.
Idiot Notes: installed the MB with the CPU/CPU-cooler on the case without connecting the CPU power cable, the front-panel audio header, or the PCI-E riser cable - guess I was too excited. Didn't figure I could just remove the bottom panel to work with the wires until too late. I also might've mounted and unmounted the PSU 5+ times to make the wires fit.
Will I do it again? Hell yes... I want to do another SFF build with something like XTIA Xproto. It'll probably be a build and sell for cost though.
## Parts List
PCPartPicker Part List
Type|Item|Price|Notes
:----|:----|:----|:----
CPU | AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor | $320.00 | Bought on Craigslist
CPU Cooler | Scythe Big Shuriken 3 50.79 CFM CPU Cooler | $44.99 | Just perfect for the RAM/MB/Case!
Motherboard | Asus ROG STRIX B550-I GAMING Mini ITX AM4 Motherboard | $200.00 | Bought on /r/hardwareswap
Memory | Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory | $159.99 @ Best Buy |
Storage | Samsung 970 Evo 500 GB M.2-2280 NVME Solid State Drive | $74.99 @ Best Buy | OS Disk
Storage | Samsung 970 Evo 1 TB M.2-2280 NVME Solid State Drive | $144.99 @ Amazon |
Video Card | EVGA GeForce RTX 3070 8 GB XC3 BLACK GAMING Video Card | $650.00 | Bought on /r/hardwareswap - wish I'd NOT paid this amount
Power Supply | EVGA SuperNOVA GM 550 W 80+ Gold Certified Fully Modular SFX Power Supply | $108.00 |
Case Fan | 2 x Noctua P14r redux-1500 PWM 78.69 CFM 140 mm Fan | $14.95 @ Amazon |
Case Fan | Scythe Kaze Flex Slim 50.79 CFM 120 mm Fan | $15.95 @ Amazon | Unused in the end
Case| IQUNIX ZX-1 Mini-ITX Case (White Coral) | $212.00 |
Misc| WiFi Antenna cause I don't like the one that comes with the MB - First Choice; Second Choice | < $10.00 @ Amazon | First one is invisible if facing down - not up; If the second one has good signal with right-angled connectors, I'll keep that instead
https://redd.it/m4kkj1
@sffpc
SFF build for the Boss (*/spouse/*).
The case looks amazing and feels solid with no flex anywhere on the case. Slightly tinny when the magnets engage with the 3 removable covers. Lining up the upper panel with the USB/Audio ports is easy with a tool or two, but painful otherwise. The CPU cooler and fan choices based on suggestions from other users proved to be awesome.
I wish I was able to find more flexible PSU cables, cause the ones that came with this PSU was a pain to work with, and I had to remove the Scythe fan I'd initially installed at the bottom to make room for them.
Idiot Notes: installed the MB with the CPU/CPU-cooler on the case without connecting the CPU power cable, the front-panel audio header, or the PCI-E riser cable - guess I was too excited. Didn't figure I could just remove the bottom panel to work with the wires until too late. I also might've mounted and unmounted the PSU 5+ times to make the wires fit.
Will I do it again? Hell yes... I want to do another SFF build with something like XTIA Xproto. It'll probably be a build and sell for cost though.
## Parts List
PCPartPicker Part List
Type|Item|Price|Notes
:----|:----|:----|:----
CPU | AMD Ryzen 5 5600X 3.7 GHz 6-Core Processor | $320.00 | Bought on Craigslist
CPU Cooler | Scythe Big Shuriken 3 50.79 CFM CPU Cooler | $44.99 | Just perfect for the RAM/MB/Case!
Motherboard | Asus ROG STRIX B550-I GAMING Mini ITX AM4 Motherboard | $200.00 | Bought on /r/hardwareswap
Memory | Corsair Vengeance LPX 32 GB (2 x 16 GB) DDR4-3200 CL16 Memory | $159.99 @ Best Buy |
Storage | Samsung 970 Evo 500 GB M.2-2280 NVME Solid State Drive | $74.99 @ Best Buy | OS Disk
Storage | Samsung 970 Evo 1 TB M.2-2280 NVME Solid State Drive | $144.99 @ Amazon |
Video Card | EVGA GeForce RTX 3070 8 GB XC3 BLACK GAMING Video Card | $650.00 | Bought on /r/hardwareswap - wish I'd NOT paid this amount
Power Supply | EVGA SuperNOVA GM 550 W 80+ Gold Certified Fully Modular SFX Power Supply | $108.00 |
Case Fan | 2 x Noctua P14r redux-1500 PWM 78.69 CFM 140 mm Fan | $14.95 @ Amazon |
Case Fan | Scythe Kaze Flex Slim 50.79 CFM 120 mm Fan | $15.95 @ Amazon | Unused in the end
Case| IQUNIX ZX-1 Mini-ITX Case (White Coral) | $212.00 |
Misc| WiFi Antenna cause I don't like the one that comes with the MB - First Choice; Second Choice | < $10.00 @ Amazon | First one is invisible if facing down - not up; If the second one has good signal with right-angled connectors, I'll keep that instead
https://redd.it/m4kkj1
@sffpc
Imgur
SFF Build w/iQUNIX ZX-1
Post with 20 views. SFF Build w/iQUNIX ZX-1
I made a shelf PC, gave more space on the desk while you can put books or plants on the shelf itself.
https://www.reddit.com/gallery/m4q9nx
https://redd.it/m4q9nx
@sffpc
https://www.reddit.com/gallery/m4q9nx
https://redd.it/m4q9nx
@sffpc