Android 13 Beta 3.2: The vibration icon is now also displayed on the lock screen statusbar.

Previously, Google added a separate switch to the Sound & Vibration settings, but this icon was only displayed in the status bar of the unlocked device. Now this problem has been fixed.

Google News | En

Android 13 Beta 3.2: work on the Easter egg has begun.

Now it is the same as in Android 12, but with the number 3 instead of 12. The 1, apparently, will be added in the next build. ¯\_(ツ)_/¯

Google News | En

pixel闻曲识音功能在非pixel设备上也能玩了

2.0.2更新日志：
添加了替代编码选项，在启用时修复了某些设备上的失真/噼啪声。通过设置 > 高级 > 使用替代编码启用。
重要提示：您还必须将 Now Playing 更新到 1.0.1 才能使替代编码选项起作用。使用应用程序中的“更新”页面更新“正在播放”。
将最大增益增加到 3.0 以应对在某些设备上需要更高增益的新编码
减少录音错误的机会
删除了“超时”通知，因为它比有用更无用
修复了识别成功页面上不可点击的筹码（例如，询问 Google）

今天实测我的小米可以正常离线自动识别了 离线录音识别没有噼啪噪声了 不用再点锁屏底部那个放大镜联网识别了 厉害厉害 有了这个项目以后第三方ROM也可以和真pixel媲美了！

离线识别的就有专辑图片 ，这点比pixel官方的都做得好 pixel官方再一次垃圾

A user with a bricked Pixel 7 Pro contacted us, and here's what we were able to find out. [Part 1]

Recently, a user with a prototype Pixel 7 Pro came to our Google News group. Unfortunately, his device was bricked by Google, so we were unable to get much information. However, we did determine the following based on early boot logs:

• The Pixel 7 Pro likely uses the Samsung S6E3HC4 display panel. For comparison, the Pixel 6 Pro uses the S6E3HC3. 9to5Google earlier said there was "no indication" that this display will appear on the Pixel 7 Pro, but boot logs show this panel is being used. Also that it will have a 3120x1440 resolution.

[Part 2]

Google News | En

A user with a bricked Pixel 7 Pro contacted us, and here's what we were able to find out. [Part 2]

• The second-generation Tensor chip may still be using Arm Cortex-A55 cores for its little cores. This is according to a line in the BL31 log, which is the final EL3 bootloader stage. According to this line, a CPU workaround is being applied for the cortex_a55 cores. It would be very odd for a Cortex A55 workaround to be used if the Tensor 2 didn't have A55 cores.

• Speaking of CPU, the Tensor 2 will still have a 4+2+2 CPU cluster

• Other components mentioned in the boot logs include the CS40l26 haptic driver IC from Cirrus Logic, the ST21NFC NFC chip from STMicroelectronics.

• We can also confirm the codenames for the Pixel 7 (panther) and Pixel 7 Pro (cheetah). Codenames for other boards/products are also revealed in ABL, including "cloudripper" (dev board), "ravenclaw" (possibly Pixel 6 Pro outfitted with GS201 for testing), and "felix" (likely Pixel 7a). Interestingly, the previously leaked "lynx" codename isn't mentioned here.

[Part 1]

Google News | En