PwizzROM-j7 NXT

TESTERS PLEASE

debloated OneUI
based on j701f

Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver


IInstallation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Reboot to system
6. Wait for welcome screen
7. Go all the way through the setup
8. never reboot from the welcome screen

Note:
First boot takes a long time (be patient)
@physwizz

ROM
https://drive.google.com/file/d/17vbDMBRQU2FQpTVxnVOE3W0DOqYfT0Wh/view?usp=sharing

Source
https://samfw.com/firmware/SM-J701F/INS/J701FDDUACUG2

RwizzROM-a50-v2

Debloated OneUI 3.1 ROM


Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver

Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen

Note:
First boot takes a long time (be patient)

@physwizz

ROM
https://drive.google.com/file/d/1sdjrIuiWeWBwOoInmuldo4zjk4XXAQuK/view?usp=sharing

RwizzROM-a20e-v3

Debloated OneUI 3.1 ROM


Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver

Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Reboot to system
6. Wait for welcome screen
7. Go all the way through the setup
8. never reboot from the welcome screen

physwizz Kernel
-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-GPU: 343 - 1300 without custom dtbo
-Extended battery life
-Spectrum support enabled
-Zram

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.me/physwizz2/250

Note:
First boot takes a long time (be patient)
@physwizz

ROM
https://drive.google.com/file/d/1tfTKyOLAOc6bGSHw8qnib7JDxJtA2AhQ/view?usp=sharing

Flash magisk for root

Kernel
https://github.com/physwizz?tab=repositories

RwizzROM-a10s
based on a107f

Note: if the zip file doesn't work, use the magisk module instead
https://t.me/physwizz2/428


Debloated OneUI 3.1 ROM


Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver

Installation

Unlock phone and only use swipe
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6.
7. Reboot to system
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen

Note:
First boot takes a long time (be patient)

@physwizz

ROM

https://drive.google.com/file/d/1kcx7o89-aPScgGsI1eWMKGGB_f_xIN8a/view?usp=drivesdk

Kernel
Stock
https://opensource.samsung.com/uploadSearch

Install TWRP
1. Download the recovery.tar for your device.
https://twrp.me/Devices/Samsung/
It should contain boot.img, recovery.img and vbmeta.
2. Unlock Bootloader
https://t.me/physwizz2/181
3. Use Odin to flash recovery.tar into the AP slot.

To boot into recovery
1. Turn device off
2. Hold down power and volume up (and also home key if it has one) until it boots.

To change TWRP
1. Download recovery.img
2. Use TWRP to install recovery.img into recovery slot.(install=> install image)
3. Reboot to recovery.

To change to Orange Fox
1. Download zip file
2. Install zip from TWRP.
3. Reboot to recovery.

@physwizz

RwizzROM-a02s
based on a025f

Debloated OneUI 3.1 ROM


Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver

Installation
1. Wipe caches and data
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen

Note:
First boot takes a long time (be patient)

@physwizz

ROM
https://drive.google.com/file/d/1acEoPXxajTRkhXEin24P9Gc_XolZbKOj/view?usp=drivesdk

RwizzROM-a30s

Debloated OneUI 3.1 ROM


Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver

Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Install a custom kernel
6. Install Magisk for root.
7. Reboot to system
If it doesn't boot, install custom kernel.
8. Wait for welcome screen
9. Go all the way through the setup
10. Never reboot from the welcome screen

Note:
First boot takes a long time (be patient)

@physwizz

ROM


Kernel
Stock boot.img

Root

Method 1
(Method 2 is easier)

A. Prepare boot image

1. Download magisk manager apk
2. Download the exact firmware (including upgrade date) for your device from https://samfrew.com or https://www.samfirmware.net/ or https://www.full-repair-firmware.com/search?q=A20 or
https://samfw.com/
3. Use zarchiver to copy AP_xxxxxxx.md5 to download directory. It will extract it from the zip.
4. Extract boot.img.lz4
5. Copy boot.img.Iz4 to download directory and extract (resulting in boot.img)
6. Use magisk manager to patch boot.img (use top install)
https://t.me/a127f_res/230?single
result magisk_patched.img
7. Rename magisk_patched.img to boot.img
9. Use zarchiver to compress boot.img to boot.tar.
10. Copy boot.tar to Windows pc or Windows Virtualbox.
11. On phone developer options in settings unlock OEM and enable usb debugging
12. Backup any important files from internal storage onto SD card.

B. Unlock bootloader

1. Turn phone off
2. Hold vol- and vol+ and plug in power cable attached to pc then release vol up to enter unlock screen.
3. Follow the instructions to unlock
(You might need to long press vol up to unlock bootloader)
vol + to select yes to confirm.
4. Press power key to unlock bootloader.

C. Flash boot image.

1. Use Odin in Windows to add boot.tar to phone. (Select AP). Some people recommend adding the other firmware parts to their slots at the same time.
2.Restart phone
3. select bootloader
4. Select factory reset (this will wipe data)
5. Restart phone and setup fully
6. install magisk manager
7. If green phone is rooted
8. If red select install/direct install
9. Advanced tick both.
10. Install root checker and verify root


Method 2

Use the above process but patch the ap......md5 file and flash that from Odin

CRB

https://t.me/CRBplus

https://forum.xda-developers.com/t/tool-windows-kitchen-crb-v2-2-1-update.3947779/

Some versions of Windows do not support case sensitive so you need to install Windows Subsystem for Linux(WSL). This can be done from CRB.

Setup
1. Install CRB onto the C: drive.
2. Go to Windows Settings and make the CRB folder an exception for virus protection.

3. Run CRB as Administrator.
4. Import Distro
5. Test Distro
6. Install WSL
7. Reboot Windows
8. Look at videos in help folder

Run CRB as Administrator.

Create new project
Extract ROM (auto)
or Extract ROM (selective)
extract apxxxxxxxxxmd5

Make any changes to the system folder found in the ROM folder
- edit build.prop to change ROM name
- add apps to system/priv-app

Build image
choose system
then choose vendor

The zip creator is not complete but you can still flash the ROM onto your phone

The 3 files you need are
build/system.img
build/vendor.img
source/boot.img

Take these files to your phone
and either flash them individually from TWRP
or
rename system.img to system_new.img
and rename vendor.img to vendor_new.img

insert them into my CRB-installer.zip
https://t.me/physwizz2/290

Version 2

physwizz kernel a022

11. On phone developer options in settings unlock OEM and enable usb debugging
12. Backup any important files from internal storage onto SD card.B. Unlock bootloader

1. Turn phone off
2. Hold vol- and vol+ and plug in power cable attached to pc then release vol up to enter unlock screen.
3. Follow the instructions to unlock
(You might need to long press vol up to unlock bootloader)
vol + to select yes to confirm.
4. Press power key to unlock bootloader.

C. Flash boot image.

1. Use Odin in Windows to add boot.tar to phone. (Select AP). Some people recommend adding the other firmware parts to their slots at the same time.
2.Restart phone
3. select bootloader
4. Select factory reset (this will wipe data)
5. Restart phone and setup fully
6. install magisk manager

physwizz a12 kernel version 1
Based on a125f

No bugs so far

Kernel
https://github.com/physwizz?tab=repositories

physwizz a12 kernel version 2
Based on a125f

For OneUI 3.1
(May be unstable for some GSIs)


Samsung securitrs disabled
More CPU governors
Optimised for performance


Kernel
https://github.com/physwizz?tab=repositories

To Install TWRP and Root A20 Android 11

1. Unlock Bootloader
https://t.me/physwizz2/181

2. Install TWRP
https://t.me/physwizz2/238

RwizzROM-a12

Debloated OneUI 3.1 ROM

Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver

Installation
1. Wipe caches, data, system and vendor
2. Install ROM
3. Install dmverity
https://t.me/physwizz2/273
4. Reboot to recovery
5. Install Magisk for root.
6. Reboot to system
7. Wait for welcome screen
8. Go all the way through the setup
9. Never reboot from the welcome screen

Note:
First boot takes a long time (be patient)


This ROM doesn't boot so use wizzROM creator instead
https://t.me/physwizz2/215

physwizz a12 kernel version 2
Based on a125f
For OneUI 3.1 and for GSI (Q or R)


Samsung securites disabled
More CPU governors
Optimised for performance


Kernel
https://github.com/physwizz?tab=repositories


@physwizz

ROM
Doesn't boot

Vbmeta a20
Flash into ap section using Odin

physwizz-2 app