Physwizz Collection

1. Debloater
physwizz debloat module

With physwizz-2 app
Magisk module to debloat any Samsung phone.
To debloat install the module from Magisk and reboot.
To rebloat delete the module in Magisk...

10.9K viewsedited 22:50

Physwizz Collection

physwizz-debloater-module-v2.zip

4 MB

physwizz debloat module v2
(Added a70 changes)
With physwizz-2 app

Magisk module to debloat any Samsung phone to remove all the apps that slow down the phone

To debloat:
Install the module from Magisk and reboot.
To rebloat:
delete the module in Magisk and reboot

Debloat list https://t.me/physwizz2/200

@physwizz

10.4K viewsedited 05:50

Physwizz Collection

recovery.tar

78.9 MB

Root for A205
Android 11

Flash into ap slot from Odin
For root, reboot into TWRP and install Magisk zip file

❤1

8.77K viewsedited 05:37

Physwizz Collection

physwizz_kernel_a20{3.03}.zip

13.6 MB

physwizz A20 (SM-a205xx)
V3.03
For OneUI Q (android 10)
or GSI (Q or R)

@physwizz

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-GPU: 343 - 1300
-GPU thermal & voltage control
-Extended battery life
-Works with Magisk 19.3 - 21.4
-Spectrum support enabled
- 4gb Zram

Flash magisk for root

For Zram
Go to HKtweaks- virtual memory
increase swappiness
choose lz4
increase size
turn on Zram

https://github.com/physwizz?tab=repositories

11K viewsedited 02:08

Physwizz Collection

Physwizz Collection

Installing physwizz custom kernels

INSTALL AT YOUR OWN RISK
I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES
But I will help any well-mannered person to recover.
Kernels will often work over 3 or 4 binaries

Note: physwizz kernels work best with debloated…

❤6

14.5K viewsedited 03:33

Physwizz Collection

INDEX: Kernel Building Guides from physwizz

Kernel Building for Beginners
https://t.me/physwizz2/997

About Me
https://t.me/physwizz2/2

Underclocking and Overclocking

I developed the underclocking code by modifying the existing overclocking code from Carlos Burero on
October 20 2020

https://github.com/physwizz/kernel_a20/commit/261a80eb4ac14dc01c82af204d90420e220f386f

https://github.com/physwizz/kernel_a20/commit/6ff437e452d14d2bff2fd01bebd4af2e26f713d0

I Developed Overclocking and Underclocking for Prime CPUs
March25 2022

https://github.com/physwizz/f62-R/commit/460f841cb12a7b9199a91e7c6a798797a0db0064

Overclocking and undeclocking values can be determined by using experimental values in all cases except oc of exynos 9611 Big cores.

@physwizz

Building with GCC
https://t.me/physwizz2/182

GITHUB for Beginners
https://t.me/physwizz2/10

Building with Clang
https://t.me/physwizz2/43

AOSP
https://t.me/physwizz2/645

Using Anykernel3
https://t.me/physwizz2/117

AIK Magisk Module
https://t.me/physwizz2/82
Update
https://t.me/physwizz2/622

Python2
https://t.me/physwizz2/424

My Build Scripts
https://t.me/physwizz2/483
https://t.me/physwizz2/590 (snapdragon)

My GitHub
https://github.com/physwizz?tab=repositories

Boot Partition Locations
https://t.me/physwizz2/610

Generic Kernel Images
https://t.me/physwizz3/9289

To support Apatch

You need modify kernel source and build to enable
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y

CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=n
Initial support

Building kernelSU
https://t.me/physwizz2/898

Ksu next & susf
https://github.com/KernelSU-Next/KernelSU-Next

Using github actions
https://github.com/lemniskett/android-kernel-actions

Building a permissive kernel
https://t.me/physwizz2/1221

Wifi fix
https://t.me/physwizz2/1291

Kernel logs
Look at
/proc/first_kmsg
/proc/kmsg
/proc/last_kmsg

Copy logs to pc
With
adb pull /proc/last_kmsg lastkmsg.txt

Upstreaming
https://t.me/physwizz2/1572

Rksu & sufs
https://github.com/rsuntk/KernelSU?tab=readme-ov-file

@physwizz

13.8K viewsedited 07:05

Physwizz Collection

Physwizz Collection

physwizz
From Sydney, Australia

BSc in Physics and Mathematics (1973 - 1975)
Wrote my first program in FORTRAN on mainframe terminal in 1975
My first computer TRS-80 MC-10 (1983)
TRS-80 MC-10 https://g.co/kgs/bzRYoh

❤4

14.7K viewsedited 01:55

Physwizz Collection

Physwizz Collection

❤3

12K viewsedited 04:33

Physwizz Collection

Spectrum_by_Minhka98_v8v2.zip

2.4 MB

SPECTRUM for A20

Install, reboot.
Access the pull down menu
Tap 3 dots
Tap button order
drag the spectrum icon into the pull down menu.
Reboot

It gives you 4 kernel profiles on Hktweaks which can also be accessed from the pull down menu.
1. Balanced : Big 520-1768, Little 546-1586
2. Performance: Big 1144-2184, Little 902-1690
3. Battery: Big 312-1560, Little: 208-1352
4. Gaming: Big 1352-2184, Little 1352-1690

@physwizz

7.28K viewsedited 06:17

Physwizz Collection

Forwarded from Thank You Members

This media is not supported in your browser

VIEW IN TELEGRAM

5.12K views23:13

Physwizz Collection

physwizz_kernel_a205-v1.6{R}.zip

13.3 MB

physwizz A20 (SM-a205xx) v1.6
For OneUI 3.1 for GSI (Q or R)

@physwizz

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-GPU: 343 - 1300 without custom dtbo
-Extended battery life
-Spectrum support enabled
-Zram

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.me/physwizz2/250
Choose dtbo.img from
https://t.me/physwizz2/248
https://t.me/physwizz2/249
https://t.me/physwizz2/250

Flash magisk for root

https://github.com/physwizz?tab=repositories

❤1

8.32K viewsedited 02:51

Physwizz Collection

dtbo-a20-stockR-u7.zip

250.8 KB

Only for a205 with R baseband and U7 binary

7.99K viewsedited 03:25

Physwizz Collection

dtbo-a20-stockQ-s7.zip

250.2 KB

Only for a205 with Q baseband and s7 binary

7.81K viewsedited 03:25

Physwizz Collection

dtbo-installer.zip

178 KB

Dtbo installer

Extract stock dtbo.img from your firmware.
Add to the zip using zarchiver.

Use stock dtbo.img from your baseband (not your kernel or your ROM)

8.27K viewsedited 06:25

Physwizz Collection

physwizz_kernel_a305-v5.0{R}.zip

13.6 MB

physwizz_kernel a30R-V5.0
Stable version
For OneUI or GSI
@physwizz

-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2080
-Little: 208 - 1690
-GPU: 343 - 1300
-Low battery drain
-lz4 compression on zram
-mtp for GSIs(from topser99)
-works with stock dtbo.img

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.me/physwizz2/250

Installation
1. Upgrade or install Android R
2. Install kernel from TWRP
3. Install Magisk for root
4. Reboot

GitHub
https://github.com/physwizz?tab=repositories

7.62K viewsedited 09:26

Physwizz Collection

physwizz_kernel_a202v2{R}.zip

13.1 MB

physwizz A20e (SM-a202xx)
+Zram
For OneUI R or GSI (Q or R)

@physwizz

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-GPU: 343 - 1300 without custom dtbo
-Extended battery life
-Spectrum support enabled
-Zram
-works with stock dtbo.img

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.me/physwizz2/250

Flash magisk for root

https://github.com/physwizz?tab=repositories

6.41K viewsedited 00:05

Physwizz Collection

physwizz_kernel_a305-v5.3{R }.zip

13.5 MB

physwizz_kernel a30R-V5.3
Stable version
For OneUI or GSI
@physwizz

-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2080
-Little: 208 - 1690
-GPU: 343 - 1300 without custom dtbo
-Low battery drain
-lz4 compression default on zram
-mtp for GSIs(from topser99)
-works with stock dtbo.img

Important note:
If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.me/physwizz2/250

Installation
1. Upgrade or install Android R
2. Install kernel from TWRP
3. Install Magisk for root
4. Reboot

GitHub
https://github.com/physwizz?tab=repositories

❤1

6.29K viewsedited 06:22

Physwizz Collection

physwizz_kernel_a405-v3.0{R }.zip

13.8 MB

physwizz_kernel a40_R_v3.0
Stable version
For OneUI or GSI
@physwizz

-Most securities disabled
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 312 - 2080
-Little: 208 - 1690
-GPU: 343 - 1300 without custom dtbo
-Low battery drain
-lz4 compression default on zram
-mtp for GSIs(from topser99)
-works with stock dtbo.img

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
https://t.me/physwizz2/250

Installation
1. Upgrade or install Android R
2. Install kernel from TWRP
3. Install Magisk for root
4. Reboot

GitHub
https://github.com/physwizz?tab=repositories

5.33K viewsedited 11:13

Physwizz Collection

QwizzROMs

Cost nothing to produce and distribute.
They are very simple ROMs based on OneUI 2.0
Please use them as a learning tool and let me know how you have modified it to suit your needs.

Note: if the zip file doesn't work, use the magisk module instead
https://t.me/physwizz2/428

A20
https://t.me/physwizz2/210

A10s
https://t.me/physwizz2/216

A10
https://t.me/physwizz2/211

A30
https://t.me/physwizz2/141

a20e
https://t.me/physwizz2/124

wizzROM Creator
https://t.me/physwizz2/214

wizzROM Creator a10s
https://t.me/physwizz2/215

@physwizz

Physwizz Collection

wizzROM Creator magisk module v4.2

DO NOT INSTALL FROM TWRP
Install from magisk or kernelSU

for all Samsung phones

Debloated ROM with Extras
Fixed apps in system/product
Extras:

HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2

Thermal throttling…

4.44K viewsedited 02:37

Physwizz Collection

physwizz-extras-module-v2.zip

55.6 MB

physwizz extras module V2
(module.prop corrected)

Installing
https://t.me/physwizz2/489?single

Magisk module to add extra system apps

Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2 app

You can remove any app that you don't want by using zarchiver.
You can also add any apps that you want to systemize.

@physwizz

4.07K viewsedited 04:56

Physwizz Collection

physwizz_a205_kernel-v2.1.zip

13.8 MB

physwizz A20 (SM-a205xx) v2.0
For OneUI 3.1 for GSI (Q or R)

@physwizz

-Samsung securities disabled.
-CPU Governors: conservative, ondemand, userspace, powersave, interactive, performance.
-Interactive is default governor
-SE linux enforcing
-CPU overclocked and underclocked
-Big: 208 - 2184
-Little: 208 - 1690
-GPU: 343 - 1300 without custom dtbo
-GPU thermal and voltage control
-Extended battery life
-Spectrum support enabled
-Zram

If you have recently installed a kernel containing a custom dtbo.img you need to go back stock dtbo.img from your baseband (not your kernel or your ROM)
Instructions are here
Choose dtbo.img from
https://t.me/physwizz2/248
https://t.me/physwizz2/249
https://t.me/physwizz2/250

Flash magisk for root before installation

https://github.com/physwizz?tab=repositories

3.9K viewsedited 11:11

About

Blog

Apps

Platform