Overlord-Kernel-V7-B1.zip
10.5 MB
Overlord-Kernel V7-B1 OLDCAM HMP
-Upstreamed to last caf version
-Upstreamit to linux 4.4.228
-Rebase to new sources
-Deleted zzmoove (sorry guys but the the dev does not want to update this module to support more current technologies and this was one of the causes of greater weight so it took so long so I decided to remove it use yankactive or interactivex)
-Add power suspend feature
-Reworked voltages
-Reworked boost
-Update wireguard
-Remove more tracing
-Removed unused drivers
-Introduce drive droid feature (thanks to Predator team for the commints so much)
-New CPU sets config by default
-Disable ESD check (Thanks to Tyler Nijmeh)
-Implemented ULPS (ultra low power save) for tianma again
-Updated a lot of I/O schedulers
-Disable more debuggers
-Relax CPU latency requirements to save power and implement kgsl
-Update LZ4 Module
-Update f2fs
-Fixes on DTS Eagle (this is a crazy driver 10 day to find a stupid ; i looked like an stupid)
-Thanks to @predatorx91 and thanks to all beta tester
-Upstreamed to last caf version
-Upstreamit to linux 4.4.228
-Rebase to new sources
-Deleted zzmoove (sorry guys but the the dev does not want to update this module to support more current technologies and this was one of the causes of greater weight so it took so long so I decided to remove it use yankactive or interactivex)
-Add power suspend feature
-Reworked voltages
-Reworked boost
-Update wireguard
-Remove more tracing
-Removed unused drivers
-Introduce drive droid feature (thanks to Predator team for the commints so much)
-New CPU sets config by default
-Disable ESD check (Thanks to Tyler Nijmeh)
-Implemented ULPS (ultra low power save) for tianma again
-Updated a lot of I/O schedulers
-Disable more debuggers
-Relax CPU latency requirements to save power and implement kgsl
-Update LZ4 Module
-Update f2fs
-Fixes on DTS Eagle (this is a crazy driver 10 day to find a stupid ; i looked like an stupid)
-Thanks to @predatorx91 and thanks to all beta tester
Forwarded from Crash-overlord [SM-8450]
Overlord-Kernel-V7-B2.zip
10 MB
Overlord-Kernel V7-B2 Oldcam HMP
-Reduced to 10 MB
-Re added zzmoove and fixed
-Overclock (idk why u want this)
-Updated zzmoove to 1.0 ver
-Updated zzmoove profiles
-This version maybe has a battery drain issue please let me know for fix
-I hope better battery backup
-Reduced to 10 MB
-Re added zzmoove and fixed
-Overclock (idk why u want this)
-Updated zzmoove to 1.0 ver
-Updated zzmoove profiles
-This version maybe has a battery drain issue please let me know for fix
-I hope better battery backup
Forwarded from Crash-overlord [SM-8450]
Overlord-Kernel-V7-B3-Oldcam.zip
10 MB
Overlord-Kernel V7-B3 Oldcam HMP
-Disable CPU overclock
-Enable screen oc 65hz for tianma only
-Fix screen flickering after enable 65hz mdss-dsi-pan-fps-update prop
-Nuke more logs from source and modules
-Introduce adreno boost
-Fix adreno idler implementation (on last version is implemented but no active)
-Kgsl improvements
-Temp sensor fix and increase sensor precision
-Fixes on PM
-Fixes on interactive gov
-Add chill and relaxed governor
-Applied 5 patch combo for log spam mitigation
-Upstream AES crypto module
-Remove URLs in the google clang version from kernel version
-Overclock I2C and SPI (500mhz --> 700mhz) (Tons of things go through the I2C and SPI protocol, including the
touchscreen. By allowing for a faster data transfer rate, we can improve
our latency and performance in numerous aspects of the hardware.)
-Moar tracing disabled
-Add LP,AGILESD,CHINA,SOCIOPATH,CDG congestion controller
-Remove POPP deprecated feature
-Allow enforcing deepest idle state selection more idling
-And more inside.
-Disable CPU overclock
-Enable screen oc 65hz for tianma only
-Fix screen flickering after enable 65hz mdss-dsi-pan-fps-update prop
-Nuke more logs from source and modules
-Introduce adreno boost
-Fix adreno idler implementation (on last version is implemented but no active)
-Kgsl improvements
-Temp sensor fix and increase sensor precision
-Fixes on PM
-Fixes on interactive gov
-Add chill and relaxed governor
-Applied 5 patch combo for log spam mitigation
-Upstream AES crypto module
-Remove URLs in the google clang version from kernel version
-Overclock I2C and SPI (500mhz --> 700mhz) (Tons of things go through the I2C and SPI protocol, including the
touchscreen. By allowing for a faster data transfer rate, we can improve
our latency and performance in numerous aspects of the hardware.)
-Moar tracing disabled
-Add LP,AGILESD,CHINA,SOCIOPATH,CDG congestion controller
-Remove POPP deprecated feature
-Allow enforcing deepest idle state selection more idling
-And more inside.
Forwarded from Crash-overlord [SM-8450]
Overlord-Kernel-V7-B4-Newcam.zip
10 MB
Overlord-Kernel V7-B4 HMP minor bug fixes (but impotant) (Newcam)
-Posible fix for idle drain
-A little hard Under Volt
-Please test now entering to RC
Keep-Overloaded
-Posible fix for idle drain
-A little hard Under Volt
-Please test now entering to RC
Keep-Overloaded
Forwarded from Crash-overlord [SM-8450]
Overlord-Kernel-V7-B4-Oldcam.zip
10 MB
Overlord-Kernel V7-B4 HMP minor bug fixes (but impotant)
-Posible fix for idle drain
-A little hard Under Volt
-Please test and give me feedback
-Entering to RC version
Keep-Overloaded
-Posible fix for idle drain
-A little hard Under Volt
-Please test and give me feedback
-Entering to RC version
Keep-Overloaded
Overlord-Kernel-V7-Stable-Oldcam.zip
10 MB
Overlord-Kernel V7-Stable Oldcam HMP
Changelog: https://telegra.ph/Overlord-Kernel-V7-Stable-Oldcam-HMP-07-01
Changelog: https://telegra.ph/Overlord-Kernel-V7-Stable-Oldcam-HMP-07-01
Overlord-Kernel-V7-Stable-Newcam.zip
10 MB
Overlord-Kernel V7-Stable Newcam HMP
Changelog: https://telegra.ph/Overlord-Kernel-V7-Stable-Newcam-HMP-07-01
Changelog: https://telegra.ph/Overlord-Kernel-V7-Stable-Newcam-HMP-07-01
I'm really need an Co-maintainer if you're available go to discussion group and text me first of all, Thanks
O-L-K¦ Stable-Releases🔹 pinned «I'm really need an Co-maintainer if you're available go to discussion group and text me first of all, Thanks»
I've tried to get rid of the overclocked version but apparently these guys like overclocking so I've decided to create an overclocked version with cross-weekly updates every 2 versions of Linux the overclocked version of Overlord-Kernel will be updated
O-L-K¦ Stable-Releases🔹 pinned «I've tried to get rid of the overclocked version but apparently these guys like overclocking so I've decided to create an overclocked version with cross-weekly updates every 2 versions of Linux the overclocked version of Overlord-Kernel will be updated»
Overlord-Kernel-V7.1-Stable.zip
10 MB
Overlord-Kernel V7.1-Stable Newcam
Chagelog:
https://telegra.ph/Overlord-Kernel-V71-Stable-Release-Newcam-07-16
Keep Overloaded
Chagelog:
https://telegra.ph/Overlord-Kernel-V71-Stable-Release-Newcam-07-16
Keep Overloaded
Overlord-Kernel-V7.1-Stable.zip
10 MB
Overlord-Kernel V7.1-Stable Oldcam
Changelog:
https://telegra.ph/Overlord-Kernel-V71-Stable-Release-Oldcam-07-16
Keep Overloaded
Changelog:
https://telegra.ph/Overlord-Kernel-V71-Stable-Release-Oldcam-07-16
Keep Overloaded
Overlord-Kernel-V7.2-RC1.zip
10 MB
Overlord-Kernel V7.2-RC1 Oldcam HMP
-Upstreamed to linux 4.4.231
-Update Wireguard to 1.0.20200712
-Disable more debug for performance
-Add Speaker and Earpiece gain (again)
-Correct limits on sound mod
-Compiled using Proton Clang 12
-Keep Overloaded
-Thanks to all Overlord team
-Thanks to Predator team
-Thanks to all beta testers
-Upstreamed to linux 4.4.231
-Update Wireguard to 1.0.20200712
-Disable more debug for performance
-Add Speaker and Earpiece gain (again)
-Correct limits on sound mod
-Compiled using Proton Clang 12
-Keep Overloaded
-Thanks to all Overlord team
-Thanks to Predator team
-Thanks to all beta testers
Overlord-Kernel-V7.2-RC1.zip
10 MB
Overlord-Kernel V7.2-RC1 Newcam HMP
-Upstreamed to linux 4.4.231
-Update Wireguard to 1.0.20200712
-Disable more debug for performance
-Add Speaker and Earpiece gain (again)
-Correct limits on sound mod
-Compiled using Proton Clang 12
-Keep Overloaded
-Thanks to all Overlord team
-Thanks to Predator team
-Thanks to all beta testers
-Upstreamed to linux 4.4.231
-Update Wireguard to 1.0.20200712
-Disable more debug for performance
-Add Speaker and Earpiece gain (again)
-Correct limits on sound mod
-Compiled using Proton Clang 12
-Keep Overloaded
-Thanks to all Overlord team
-Thanks to Predator team
-Thanks to all beta testers
