The latest OWRX+ release contains options to make user interface semi-transparent and draw a white frame around the receiver panel. Look for these options in "General | Display".
The newest OpenWebRX+ adds following improvements to the APRS traffic display:
1) You can disable colored squares obscuring APRS markers on the map.
2) Paths traversed by APRS packets are now shown in the callouts.
3) There is a setting for ignoring reports that came via longer paths than some previously received report.
1) You can disable colored squares obscuring APRS markers on the map.
2) Paths traversed by APRS packets are now shown in the callouts.
3) There is a setting for ignoring reports that came via longer paths than some previously received report.
The band plan in the latest OWRX+ includes the 145.825MHz frequency for the APRS repeater at the International Space Station. A few times a day, when the ISS is passing above and the weather is good, you can expect to see APRS reports from really, really far away. Each pass only lasts for about several minutes though.
The OpenWebRX+ 1.2.11 disk image for Raspberry Pi 4 is now available. Also known to work on RPI400 and RPI3. Thanks go to Jochen (DC9DD).
https://github.com/luarvique/openwebrx/releases/tag/image-rpi4-1.2.11
https://github.com/luarvique/openwebrx/releases/tag/image-rpi4-1.2.11
GitHub
Release image-rpi4-1.2.11 · luarvique/openwebrx
Update README.md
The new OpenWebRX+ 1.2.12 packages are now available from the repository, with the following changes:
* Added FAX decoder, tested on weather fax transmissions.
* Added FAX background decoding service.
* Added option to ignore indirect APRS reports.
* Fixed a minor JavaScript error on startup.
* Optimized SSTV decoder code.
* Added FAX decoder, tested on weather fax transmissions.
* Added FAX background decoding service.
* Added option to ignore indirect APRS reports.
* Fixed a minor JavaScript error on startup.
* Optimized SSTV decoder code.
The OpenWebRX+ 1.2.12 disk image for Raspberry Pi 4 is now available. Also known to work on RPI400, RPI3, and RPIZero2. Thanks go to Jochen (DC9DD).
https://github.com/luarvique/openwebrx/releases/tag/image-rpi4-1.2.12
https://github.com/luarvique/openwebrx/releases/tag/image-rpi4-1.2.12
GitHub
Release image-rpi4-1.2.12 · luarvique/openwebrx
Restricting image tiles in file browser to 32% width.
The new OpenWebRX+ 1.2.13 packages are now available from the repository, with the following changes:
* Added synchronous AM demodulator (SAM).
* Added 12.5kHz and 25kHz tuning steps.
* Extended default FAX page length to 1400 lines.
* Fixed bandpass bounds resetting after any frequency change.
* Fixed bandpass indicator labels cutting off.
* Fixed file browser, restricting all shots to 32% width.
* Fixed several bugs in the background FAX decoder.
* Made OWRX package depend on the latest PyCSDR package.
* Added synchronous AM demodulator (SAM).
* Added 12.5kHz and 25kHz tuning steps.
* Extended default FAX page length to 1400 lines.
* Fixed bandpass bounds resetting after any frequency change.
* Fixed bandpass indicator labels cutting off.
* Fixed file browser, restricting all shots to 32% width.
* Fixed several bugs in the background FAX decoder.
* Made OWRX package depend on the latest PyCSDR package.
The new OpenWebRX+ 1.2.14 packages are now available from the repository, with the following changes:
* Added image conversion to PNG (requires ImageMagick).
* Ported MSK144 decoder from Jakob's OWRX branch.
* Improved FAX parser, fixing several issues.
* Fixed color order issue with SSTV and FAX displays.
* Fixed several issues in the SSTV parser.
* Moved 4m band edges to fit most country-specific allocations.
* Added image conversion to PNG (requires ImageMagick).
* Ported MSK144 decoder from Jakob's OWRX branch.
* Improved FAX parser, fixing several issues.
* Fixed color order issue with SSTV and FAX displays.
* Fixed several issues in the SSTV parser.
* Moved 4m band edges to fit most country-specific allocations.
The OpenWebRX+ 1.2.14 disk image for Raspberry Pi 4 is now available. Also known to work on RPI400, RPI3, and RPIZero2. Thanks go to Jochen (DC9DD).
https://github.com/luarvique/openwebrx/releases/tag/image-rpi4-1.2.14
https://github.com/luarvique/openwebrx/releases/tag/image-rpi4-1.2.14
GitHub
Release image-rpi4-1.2.14 · luarvique/openwebrx
Updated CSDR version requirement.
How would you like to receive CW?
Anonymous Poll
57%
In USB mode, 800Hz below the carrier (current implementation)
30%
In LSB mode, 800Hz above the carrier (supposed standard)
13%
Something else (please, add a comment)
The new OpenWebRX+ 1.2.16 packages are now available from the repository, with the following changes:
* Added ability to change center frequency by right-clicking arrow buttons.
* Added an option to allow audio recording (on by default).
* Added an option to allow center frequency changes (off by default).
* Added an option to require magic key for center frequency changes.
* Added 10Hz, 20Hz, and 50Hz steps for CW listeners.
* Added ability to change center frequency by right-clicking arrow buttons.
* Added an option to allow audio recording (on by default).
* Added an option to allow center frequency changes (off by default).
* Added an option to require magic key for center frequency changes.
* Added 10Hz, 20Hz, and 50Hz steps for CW listeners.
For US and Canada residents, HRO is currently selling geniune RSPdx for $180 and RSP1A for $100:
https://www.hamradio.com/detail.cfm?pid=H0-017027
https://www.hamradio.com/detail.cfm?pid=H0-015965
(no, not a paid advertising, just letting interested parties know)
https://www.hamradio.com/detail.cfm?pid=H0-017027
https://www.hamradio.com/detail.cfm?pid=H0-015965
(no, not a paid advertising, just letting interested parties know)
Ham Radio Outlet
SDRplay SDRplay RSPdx
RSPdx Single-tuner 14-bit SDR 1 kHz to 2 GHz 2-SMA 1-BNC
The new OpenWebRX+ 1.2.17 packages are now available from the repository, with the following changes:
* Integrated multimon-ng digital mode decoding suite.
* Added FLEX paging protocol decoder, provided by multimon-ng.
* Added SELCALL decoders for EEA, EIA, CCIR, DTMF standards.
* Fixed center frequency modifications surviving profile change.
* Fixed waterfall colors resetting when changing center frequency.
* Fixed background decoding cases using resampler.
* Integrated multimon-ng digital mode decoding suite.
* Added FLEX paging protocol decoder, provided by multimon-ng.
* Added SELCALL decoders for EEA, EIA, CCIR, DTMF standards.
* Fixed center frequency modifications surviving profile change.
* Fixed waterfall colors resetting when changing center frequency.
* Fixed background decoding cases using resampler.
Looking for people familiar with ISM and rtl_433 and willing to test ISM support in OWRX+. Please, apply in comments, but only if you know what ISM is.