AlgoFX is a trend-following indicator for MetaTrader 5 focused on identifying pullback zones within an established trend. It was built with XAUUSD in mind, but can be applied to any symbol and timeframe. It does not output entries, stops, or targets; it only marks areas of interest and leaves execution to the user.

Trend state is derived from EMA 50 and EMA 200. Uptrend requires EMA 50 above EMA 200 with EMA 200 rising; downtrend requires the opposite with EMA 200 falling. Otherwise the panel reports no clear trend. Zones are ATR-depth pullbacks around EMA 50 with candle-close confirmation, optionally filtered by RSI and spaced via a cooldown.

Zones are calculated on closed candles only, so historical marks match live behavior. An on-chart risk panel shows trend, balance or equity, risk per trade, ATR-based lot sizing with tick value and broker const...

👉 Read | AppStore | @mql5dev

Session indicators that require broker server time tend to break on DST changes and when switching brokers. This session tool defines Asia, London, and New York in their local market times, then converts to broker server time automatically, including the mismatched UK vs US DST transition weeks. An optional overlap marks when London and New York are both open.

Sessions are drawn as high/low boxes or full-height shading, with the overlap as a dashed outline. A top-right panel reports the current state (“NOW”), highlights active sessions in green, and shows countdowns to the next open or close. Box hover reveals exact server-time start and end.

Configuration includes server time mode (auto, NY-close model, or manual UTC offset), display controls (history, styles, labels, colors, max timeframe), and per-session toggles, times, and colors. Strategy Teste...

👉 Read | Forum | @mql5dev

Pending Panel is a chart-based execution EA for MT5 focused on fast placement of pending orders: Buy Limit, Sell Limit, Buy Stop, and Sell Stop. Order volume and entry distance are adjusted from on-chart controls, avoiding parameter edits and recompiles. Optional SL/TP can be attached at placement.

The EA supports OCO pairing, cancelling the opposing order when one triggers, plus bulk removal of all pending orders created by the tool. A live on-panel list shows current pending orders with type, volume, price, and SL/TP. Implementation is dependency-free, using only the standard library.

Broker constraints are handled via automatic detection of STOPS_LEVEL and filling mode, but behaviour should be validated on a demo due to broker-specific FREEZE_LEVEL rules and execution differences. The tool does not generate signals and manages only orders with its own m...

👉 Read | AlgoBook | @mql5dev

Garch.mqh implements maximum-likelihood estimation for GARCH-family volatility models on return series and produces multi-step variance forecasts. Output includes parameter estimates with classic and Bollerslev-Wooldridge robust standard errors, log-likelihood with AIC/BIC, per-period conditional variance, persistence, and shock half-life. No DLL is required; covariances use the MQL5 matrix type.

Supported specifications cover zero or constant mean, and variance models GARCH(1,1), GJR-GARCH(1,1,1), and EGARCH(1,1,1). Innovations can be Normal, standardized Student t, or GED with estimated shape. Initialization uses an EW variance from the first 75 residuals and variance bounds aligned to EWMA, matching common reference behavior for identical parameters.

Optimization is staged: unconstrained BFGS on a free parametrization, bounded Nelder-Mead, then bound...

👉 Read | Freelance | @mql5dev

A chart indicator quantifies two recurring outcomes for each new bar: whether price trades above the prior high and whether it trades below the prior low. It scans the visible history, groups cases by the prior candle direction (bullish vs bearish), and computes how far beyond the previous high/low price typically extends.

On the active bar it renders up to five levels above and five below, starting at the prior high/low. Each level shows a 0–100% track plus a filled segment and printed percentage, based on the share of comparable historical bars that reached that distance. Level spacing defaults to 0.5x ATR(14) from closed bars, or can be set as percent-of-price; levels remain stable while the current candle forms.

Probabilities are recomputed on every bar so older, unreached levels decay naturally. A panel reports favored-side hit rate over all bar...

👉 Read | Calendar | @mql5dev

VpsToolkit (VpsToolkit.mqh) is a lightweight include for EAs running 24/7 on an MQL5 VPS or a local PC. It adds no trading logic and is used by calling only the needed functions. A demo EA shows integration and focuses on production issues: concurrent runs on VPS and PC, duplicate orders after timeouts, restarts resetting state, trades closed while the EA was offline, and VPS-only logs.

Core functions include run-location gating (VT_ActiveHere), trading permission diagnostics (VT_CanTrade), and safer market execution (VT_OpenMarket returning OK/FAIL/UNKNOWN and verifying results after timeouts). It also provides restart-safe initialization (VT_Init/VT_Ready), history-based daily stats (VT_TradesToday), detection of positions closed while offline (VT_ClosedWhileOff), restart counters and announcement throttling, and append-only UTF-8 CSV logging with daily counter...

👉 Read | AppStore | @mql5dev

An ICT-style dealing range indicator calculates the current leg from confirmed swing points and plots premium/discount structure with non-repainting logic. The range starts at the older of the last confirmed swing high/low, then expands as new highs or lows print until a new confirmed swing resets it. Swings require N candles on both sides (default 10), confirmed only after right-side closes.

Rendered levels include equilibrium (50%), premium and discount zones, plus OTE as the 62%–79% band with a 70.5% line. Direction is classified as up leg when the low precedes the high, otherwise down leg, placing OTE in the expected zone per ICT conventions. Optional retracements and standard deviation projections are supported.

IPDA reference ranges (20/40/60 completed trading days) are plotted with merged labels for equal levels. Alerts fire on candle close fo...

👉 Read | Quotes | @mql5dev

CMECalendar.mqh provides rule-based session halts for CME Globex equity index futures in New York time, aimed at EAs that must exit before the daily stop or avoid trading on short sessions. It covers regular 17:00 halts, full closures (New Year’s Day, Good Friday, Christmas), 13:00 early halts on major US holidays, 13:15 halts on 3 July, the day after Thanksgiving, and 24 December, plus the 09:15 Good Friday halt when it coincides with the US jobs report. Holiday observance shifts are handled, and Good Friday is computed via the Gregorian Easter algorithm.

Unpredictable one-offs are handled through a small CME_SPECIAL_DAYS string. All functions use New York dates/times; server time must be converted using the broker offset.

CMECalendarScan.mq5 validates the rules against M1 history by finding the last real trade per day, accounting for stray weekend/after-h...

👉 Read | Forum | @mql5dev

An ICT Power of Three workflow relies on tracking higher-timeframe candle structure while executing on lower timeframes. This indicator renders one or two higher-timeframe candles at their real price levels beside the active chart, allowing an H4 or D1 candle to be monitored while trading M5 or M15.

It shows the last completed candles plus the live candle, with auto timeframe pairing (for example M5 -> H1 + H4, M15/M30 -> H4 + D1, H1 -> D1 + W1). Each set includes timeframe, time remaining to close, and whether price is above or below the open. Live candles project dashed open/high/low references back to where they formed. Labels avoid overlap, and hover displays OHLC. Optional prior candle high/low can be plotted.

Candles are synthesized from current-chart bars (first open, last close, max high, min low) with no external timeframe data loading, matc...

👉 Read | NeuroBook | @mql5dev

RegimeHMM.mqh implements market regime detection using a Hidden Markov Model. Returns or custom feature vectors are modeled as emissions from a small set of Gaussian states, with state transitions governed by a Markov chain. The implementation supports multiple features, full covariance, and runs without DLL dependencies.

Model fitting uses Baum-Welch with scaled forward-backward to avoid underflow on long series. Initialization is based on k-means++ with multiple restarts, keeping the best likelihood. Covariance stability is enforced with a small variance floor, and states are sorted by the variance of the first feature so regime 0 is consistently the lowest-volatility state.

Outputs include filtered probabilities per bar for non-look-ahead use, smoothed posteriors for charting, the Viterbi path, expected state durations, transition-matrix forecasts, and l...

👉 Read | AlgoBook | @mql5dev

Margin Call Radar is a read-only risk panel for MetaTrader 5 focused on margin call and stop out proximity, plus projected margin level under adverse moves. It does not open, modify, or close orders, so it can run alongside EAs or manual trading.

It reports margin level (%) with status colors, and distance to margin call/stop out in account currency, % of equity, and points for the netted book. Hedge handling is net exposure per symbol; fully hedged books return points as n/a. Brokers with stop out in money or percent are supported.

Shock scenarios include adverse price moves of 1% and 3% across positions and a 5% equity drop, each returning the resulting margin level. A positions table shows symbol, side, volume, and P/L including swap.

Calculations use margin level = equity/margin*100, refreshed by timer. A separate core library ships with a test ...

👉 Read | Signals | @mql5dev

Kalman.mqh provides a Kalman filter and smoother for linear Gaussian state space models with one observation per bar. It uses exact diffuse initialization (Durbin–Koopman), accepts missing values, and avoids ad-hoc “starting variance” tuning. No DLL is required.

Three models can be fitted by maximum likelihood: local level, local linear trend, and time-varying regression (e.g., drifting hedge ratio). Custom models can be set via SetModel(Z,T,Q,H), then run with Filter(y) and Smooth(). SetDynamicRegression() runs with user-chosen variances.

Outputs include filtered and smoothed states with standard deviations, one-step forecast errors and variances, forecasts of y, exact diffuse log-likelihood, AIC/BIC, and diffuse-bar count. Variances are optimized on log scale using a multi-start grid plus BFGS and Nelder–Mead. Numerical stability is handled via rank-...

👉 Read | VPS | @mql5dev

News Lines 1.30 for MetaTrader 5 adds an on-chart economic calendar with a movable event panel. Scheduled releases are rendered as vertical lines at exact timestamps, color-coded by impact, with tooltips showing time, currency, event name, forecast, previous, and actual values. Events sharing the same minute are consolidated into a single line and tooltip.

The panel lists upcoming and recent releases with countdowns, supports drag, resize, collapse, and scrolling, and includes quick filters for labels, impact level, instrument groups, source selection, and font size. Clicking an event focuses the chart to that event across occurrences, with a Reset control to restore defaults.

Data can be sourced from the terminal’s built-in calendar or a weekly JSON feed via WebRequest. Refresh is periodic, settings persist across restarts, no DLL imports are used, and no...

👉 Read | NeuroBook | @mql5dev

Cointegration.mqh provides cointegration diagnostics for multi-series price data, targeting pairs and spread trading workflows. It includes ADF unit root testing, Engle-Granger cointegration for 2–6 series, and Johansen trace and max-eigen tests, with p-values and critical values. It also outputs the spread, half-life of mean reversion, and spread z-score. Operation is self-contained with no DLL dependency.

ADF supports no constant, constant, linear, or quadratic trend, with fixed lags or selection via AIC/BIC/last-lag t-stat and a statsmodels-style default cap. Lag search reuses a single QR factorization per run. Engle-Granger runs OLS on the first series against the rest plus trend, then ADF on residuals with series-count-specific cointegration tables. Johansen supports multiple lagged differences and deterministic options; eigenproblems are solved symmetr...

👉 Read | AlgoBook | @mql5dev

AttachExpert.mqh enables attaching an Expert Advisor to a chart from MQL5 with specified inputs and an explicit “Allow Algo Trading” state. Since MQL5 lacks a native API for this, the library generates a chart template containing an <expert> block and applies it via ChartApplyTemplate().

Unset inputs remain at default values. Template application is asynchronous; AttachExpert() waits up to 10 seconds for CHART_EXPERT_NAME to report the EA is running, or returns immediately when waitMs = 0, which is suitable when called from another EA. Applying to the caller’s own chart is not supported because the template would replace it. Trade permission is also constrained by the terminal AutoTrading button.

A bundled example script opens a chart and attaches the standard Moving Average example EA with selected inputs. Validation across multiple timeframes confirmed correc...

👉 Read | Freelance | @mql5dev

Meta-labeling often treats heuristic win/loss labels as ground truth, even when fixed-horizon returns create systematic mislabels that a meta-filter will learn without warning. This article adds a label audit step using confident learning, implemented natively in MQL5 as CConfidentLabelAuditor.

The EA generates RSI/trend crossover candidates, builds a compact 4-feature vector (direction-normalized for shared long/short training), and labels each sample by the close N bars ahead. The auditor cross-fits logistic regression to get out-of-fold probabilities, builds a calibrated “confident joint” confusion matrix, then ranks and prunes likely mislabels by low self-confidence.

A single input toggles training on raw vs cleaned rows, enabling Strategy Tester A/B runs. The system re-audits and refits on a rolling window, logs CSVs, and includes a FlagView indicator to ins...

👉 Read | AppStore | @mql5dev

MetaTrader 5 custom symbols let developers generate synthetic instruments with their own ticks and bar history, but still use standard charts: indicators, objects, and even EAs. The article shows how to build derivative symbols from broker data or external feeds to add analysis types MT5 does not provide natively.

Equal-volume and equal-range bars are generated by reading M1 history or tick history (CopyTicks/CopyTicksRange) and writing bars via CustomRatesUpdate; live updates can be driven with CustomTicksAdd. This enables tick-count, real-volume (where available), or fixed-range bar formation, with history reset and incremental building handled in code.

Tick charts are upgraded into full-featured charts by storing each tick as an M1 bar, optionally using a ring buffer to keep a stable window size. A key engineering point is routing trade execution ...

👉 Read | NeuroBook | @mql5dev

A position manager for MT5 targets grid and martingale baskets on XAUUSD, forex, or indices by pairing one strong winner with one deep loser. It calculates profit plus swap and commission, then closes both when the combined result meets a configured minimum, closing the winner first to lock gains. No entries are opened.

Filtering can be limited to the chart symbol or applied across all symbols, and to a single magic number or all positions, including manual trades. Optional basket-level take profit and stop loss in account currency can flatten all managed positions.

Execution is defensive: each close checks the return code and retries after a pause. A minimal panel shows managed positions, floating result, best and worst tickets, pair sum versus the threshold, and controls for pair close, close all, and pause. Pair logic is isolated in XP_FindPair and XP_Clos...

👉 Read | AppStore | @mql5dev

Major LLM vendors are aligning on shared expectations for model interoperability and evaluation. Gemini, Mistral, Claude, and Perplexity are signaling interest in common interfaces, clearer capability reporting, and more consistent safety and reliability testing.

For engineering teams, this can reduce integration friction across providers, improve portability of prompt/tooling stacks, and make vendor comparisons less ambiguous. Focus areas likely include standardized tool-calling schemas, response formatting guarantees, and reproducible benchmark disclosure.

If this coordination continues, procurement and architecture decisions may shift from vendor-specific adapters toward simpler abstraction layers, with more attention on latency, cost, context limits, and compliance.

👉 Read | Calendar | @mql5dev

DataSnooping.mqh adds data-snooping controls to strategy and parameter optimizations, addressing whether the top result is statistically better than a benchmark or simply the best outcome among many trials.

It implements Hansen’s SPA test, White’s Reality Check, the Romano-Wolf StepM procedure, and the Hansen-Lunde-Nason model confidence set. Resampling is done with a stationary bootstrap to preserve dependence in daily returns, with a configurable seed and no DLL requirement.

Components include CSuperiorAbility (SPA p-values, Reality Check, critical values, and StepM results), CModelConfidenceSet (per-strategy p-values and best-set selection using R or max statistics), and CStationaryBootstrap (bootstrap indices and efficient mean computation). A provided example generates 100 moving-average rules or reads CSV returns, illustrating how single-test...

👉 Read | Calendar | @mql5dev

Session Range Breakout displays the intraday high/low for up to three configurable sessions and keeps those levels visible after the session ends by extending them to the right.

Sessions are defined by start hour (inclusive) and end hour (exclusive) in server time. While a session is active, the running high and low are tracked. After the close, both levels are finalized and drawn as dotted lines, with optional “NAME H / NAME L” labels and an optional thin range rectangle. Values are not recalculated later, so the output does not repaint.

Configuration includes per-session enable/disable, name, hours, and color, plus history depth, extension length (bars), and line width. Optional features cover labels, the range rectangle, and alerts (popup, sound, push) when a bar closes outside a session range. An auto-zoom option can rescale the chart on load to ...

👉 Read | VPS | @mql5dev