Forwarded from ThreeDog
Soft option is not working for now on full res XML, it'll be fixed after investigation 🔊
👍5
After a lot of testing, a lot of photos and the finishing touches, I am now ready to proudly announce that I would like to share my work with you 😊
In the past, I have only used the Settings privately, because it is not completely my creation 🧐
A few days ago I got permission from Arcide and Matteo to publish these settings👌
But First,
About Warm and Neutral :
Since it is virtually impossible to capture 2 of the most common lighting conditions with a neutral to beautiful look with one setting, I have created 2 dedicated settings.
My Warm setting is for all situations where it can be a little warmer, or the pictures you have taken need "that certain something" more.
But the Warm setting has its limits, especially with artificial light💡 in the evening hours, it is too much.
That's exactly why I created the Neutral setting, for situations where warm is too warm, the neutral is just right.
Neutral can be used around the clock 🌞💡
It sounds cumbersome, but after some time you will know in advance which setting works now. But a very simple rule:
Never Warm in artificial light, otherwise always warm, unless it is too warm 😊
In the past, I have only used the Settings privately, because it is not completely my creation 🧐
A few days ago I got permission from Arcide and Matteo to publish these settings👌
But First,
About Warm and Neutral :
Since it is virtually impossible to capture 2 of the most common lighting conditions with a neutral to beautiful look with one setting, I have created 2 dedicated settings.
My Warm setting is for all situations where it can be a little warmer, or the pictures you have taken need "that certain something" more.
But the Warm setting has its limits, especially with artificial light💡 in the evening hours, it is too much.
That's exactly why I created the Neutral setting, for situations where warm is too warm, the neutral is just right.
Neutral can be used around the clock 🌞💡
It sounds cumbersome, but after some time you will know in advance which setting works now. But a very simple rule:
Never Warm in artificial light, otherwise always warm, unless it is too warm 😊
👍10
LMC Configs
First of all, I would like to introduce you to the LMC configuration and explain it in more detail:
This setting was published last year on September 14th by Matteo in XML channel, he worked on it together with Arcide.
The name is ArcideMatteo.xml
I discovered this setting and was amazed by the details 😃
After some time, the colors have been completely revised, because I have really high demands on the colors🧐
In addition, I have refined the look a bit, so that the picture is a bit softer 👍
In the course of the time in which I now test settings, I have noticed that unfortunately many use a very strong denoise, which leads to much muddy images in low light.😑
Therefore, I have reduced the denoise to a minimum. As a result, the picture is a bit noisy, but you don't lose the natural look of faces, especially in low light 🕯️😉
For now, unfortunately, the LMC R15 has to be used🙃. It is a version adapted by Dennis that contains the correct blacklevels. Since the original XML was created for this version, and I've changed a lot as well, I can't say for sure what problems occur with R17 & R18. But short tests already showed me incompatibilities.
About Fullres
Do you also like to use the Fullres module from time to time? Then you can enable compatibility with a small setting 👌
Go to : Photo Processing -> Hex Manual -> enable "User Value No 8". In addition, upscaling (activated by default) must be deactivated with the "Res" button. For normal use, simply reload the setting ☺️
First of all, I would like to introduce you to the LMC configuration and explain it in more detail:
This setting was published last year on September 14th by Matteo in XML channel, he worked on it together with Arcide.
The name is ArcideMatteo.xml
I discovered this setting and was amazed by the details 😃
After some time, the colors have been completely revised, because I have really high demands on the colors🧐
In addition, I have refined the look a bit, so that the picture is a bit softer 👍
In the course of the time in which I now test settings, I have noticed that unfortunately many use a very strong denoise, which leads to much muddy images in low light.😑
Therefore, I have reduced the denoise to a minimum. As a result, the picture is a bit noisy, but you don't lose the natural look of faces, especially in low light 🕯️😉
For now, unfortunately, the LMC R15 has to be used🙃. It is a version adapted by Dennis that contains the correct blacklevels. Since the original XML was created for this version, and I've changed a lot as well, I can't say for sure what problems occur with R17 & R18. But short tests already showed me incompatibilities.
About Fullres
Do you also like to use the Fullres module from time to time? Then you can enable compatibility with a small setting 👌
Go to : Photo Processing -> Hex Manual -> enable "User Value No 8". In addition, upscaling (activated by default) must be deactivated with the "Res" button. For normal use, simply reload the setting ☺️
👍10
Xiaomi Mi 11 Series - XML Channel
LMC8.4_signed.apk
You need this APK from Dennis
Now let's talk briefly about the MSL9: The MSL9 is based on Juhana's work.
Threedog was kind enough to make this great setting run on the 11U.
Since I saw a lot of potential here,
I decided to optimize the colors according to the highest standards, so that this setting is also on a par with the LMC config 😊💪
However, I didn't change anything about the look or the Details.
But I have adapted the LDR function to my taste:
With the LDR function activated, you now get a brighter, softer image 😊
Juhana had already had dedicated buttons for other darker image modes, but in my eyes one was missing that makes the image brighter and softer.
Now there are almost no limits to creativity. Again, there is a choice between the Warm 🌞 and the Neutral 💡Configs.
Threedog was kind enough to make this great setting run on the 11U.
Since I saw a lot of potential here,
I decided to optimize the colors according to the highest standards, so that this setting is also on a par with the LMC config 😊💪
However, I didn't change anything about the look or the Details.
But I have adapted the LDR function to my taste:
With the LDR function activated, you now get a brighter, softer image 😊
Juhana had already had dedicated buttons for other darker image modes, but in my eyes one was missing that makes the image brighter and softer.
Now there are almost no limits to creativity. Again, there is a choice between the Warm 🌞 and the Neutral 💡Configs.
👍8
You also need the Library and the APK from this post
👍5
Let me introduce you to the:
MSL10 11U MFA
Like with my other Adjustments, I only adjusted the Colors and the White Balance for each individual Lens and matched them to each other.
This way you always have almost identical colors, even if you have to change the lens 💪
(100% won't be possible, but I think it's about 85-90% 🤓).
I have also taken over the correct black levels from Dennis_al.
I didn't change the Details, Noise Reduction, Brightness and Contrasts, they stayed exactly as Juhana intended.
Instructions:
Install the APK
Put the .so in the "LIB" Folder
(in the Main Folder of SGcam)
Put the two XML in the "XML" Folder
(in the Main Folder of SGcam)
Load Config by : Double Tab on Black Area between Gallery and Shutter Button 👍
Have Fun 😉
MSL10 11U MFA
Like with my other Adjustments, I only adjusted the Colors and the White Balance for each individual Lens and matched them to each other.
This way you always have almost identical colors, even if you have to change the lens 💪
(100% won't be possible, but I think it's about 85-90% 🤓).
I have also taken over the correct black levels from Dennis_al.
I didn't change the Details, Noise Reduction, Brightness and Contrasts, they stayed exactly as Juhana intended.
Instructions:
Install the APK
Put the .so in the "LIB" Folder
(in the Main Folder of SGcam)
Put the two XML in the "XML" Folder
(in the Main Folder of SGcam)
Load Config by : Double Tab on Black Area between Gallery and Shutter Button 👍
Have Fun 😉
👍7
Here are the missing original Configurations made by Juhana and ported by Threedog, so that you can use it if necessary 😊
👍2