Designation- Design Engineer
Qualification: DME/BE/B.Tech
in Mechanical/Production
Experience- 1-3 Years
Software- UG NX & AutoCAD
Notice Period- Immediate to 1 Month
Location- Pune
Mandatory Skills:
· Experience with hands-on software tools- UG NX and AutoCAD.
· Relevant experience domain working knowledge on cutting tool insert domain.
· Hands-on UG NX software with good 3D modeling knowledge.
· Preparation of 2D manufacturing drawings with proper GD&T.
· Preparation of manufacturing BOM.
· In-depth Knowledge of the Manufacturing process.
· Good verbal and written communication skills.
Interested candidates, kindly share your CV below mail- careers@shivamtech.com
Qualification: DME/BE/B.Tech
in Mechanical/Production
Experience- 1-3 Years
Software- UG NX & AutoCAD
Notice Period- Immediate to 1 Month
Location- Pune
Mandatory Skills:
· Experience with hands-on software tools- UG NX and AutoCAD.
· Relevant experience domain working knowledge on cutting tool insert domain.
· Hands-on UG NX software with good 3D modeling knowledge.
· Preparation of 2D manufacturing drawings with proper GD&T.
· Preparation of manufacturing BOM.
· In-depth Knowledge of the Manufacturing process.
· Good verbal and written communication skills.
Interested candidates, kindly share your CV below mail- careers@shivamtech.com
👍2
Attention all job seekers! We are looking for candidates with 2-8 years of consulting experience in Energy Efficiency and Low Carbon technology, Climate & Green Finance, and Energy & climate modelling. If you have a B.Tech
in Electrical/ Mechanical/ Electronics/ Chemical Engineering/Economics with M.Tech/
MBA or equivalent, we want to hear from you!
Please send your resume to pradeep.singhvi@in.gt.com. Don't miss out on this opportunity to work with us!
in Electrical/ Mechanical/ Electronics/ Chemical Engineering/Economics with M.Tech/
MBA or equivalent, we want to hear from you!
Please send your resume to pradeep.singhvi@in.gt.com. Don't miss out on this opportunity to work with us!
Dear All
We have an urgent requirement of 5 (Five) Diploma Engineers ( Electrical and Mechanical) only.
Maximum 2 years of Exp. Is required wheather ON Roll or OFF roll.
Salary 20K CTC PM.
Location- Manesar
Department-R&D, QA & VD
Pls share CVs on vinay.kumar@hmcmm.com
We have an urgent requirement of 5 (Five) Diploma Engineers ( Electrical and Mechanical) only.
Maximum 2 years of Exp. Is required wheather ON Roll or OFF roll.
Salary 20K CTC PM.
Location- Manesar
Department-R&D, QA & VD
Pls share CVs on vinay.kumar@hmcmm.com
👍1
Hi All,
Greetings from AXISCADES!
We are looking for Wiring Harness Design Engineer– Heavy Engineering
Job Description:
-Expertise on Electrical schematics, Routing Modeling & detailing of wiring harness using Creo,
-Good product Knowledge on Engine or Machine Wiring (Engine, Automotive, Trucks, Bus)
-Experience on Sheet metal Panel design for electrical wiring.
Key technical Required - Creo Harness and schematic expertise, sheet metal parts modelling & detailing, good communication.
Job Location – Bangalore and Hyderabad
Experience – 3-7 years
Interested candidates please send resume at himangi.maheshwari@axiscades.in
Greetings from AXISCADES!
We are looking for Wiring Harness Design Engineer– Heavy Engineering
Job Description:
-Expertise on Electrical schematics, Routing Modeling & detailing of wiring harness using Creo,
-Good product Knowledge on Engine or Machine Wiring (Engine, Automotive, Trucks, Bus)
-Experience on Sheet metal Panel design for electrical wiring.
Key technical Required - Creo Harness and schematic expertise, sheet metal parts modelling & detailing, good communication.
Job Location – Bangalore and Hyderabad
Experience – 3-7 years
Interested candidates please send resume at himangi.maheshwari@axiscades.in
Dear Connections,
Greeting from Vengala Engineering Design Services Pvt ltd.
We’re currently hiring for Design Interns and Design Engineers – Mechanical (Automotive)
JD:
Tool: CATIA V5
Domain: Plastics (Trims - Interiors and Exteriors)
- 2D & 3D
- Drafting and Assembling
- Surface Design
- GD&T
- Generative Shape Design
Requirements:
Experience: 0 – 2 Years of Experience (Relevant – CATIA V5 & Plastics)
Education: B.E/ B.Tech
, Diploma / Post Diploma – Mechanical
Preferred Candidates from NTTF , CIPET, DTDM, CITD.
Passed Outs: 2020, 2021 & 2022 (* For Training - Freshers from mentioned passed out years can also apply)
Client Location: Bengaluru & Chennai.
• Willing to work in rotational Shifts
Notice Period: Immediate to 15 days max.
Suitable and interested candidates can share their updated resume on dhriti.ps@vengala.co and can contact on Ph: 8884333122
Greeting from Vengala Engineering Design Services Pvt ltd.
We’re currently hiring for Design Interns and Design Engineers – Mechanical (Automotive)
JD:
Tool: CATIA V5
Domain: Plastics (Trims - Interiors and Exteriors)
- 2D & 3D
- Drafting and Assembling
- Surface Design
- GD&T
- Generative Shape Design
Requirements:
Experience: 0 – 2 Years of Experience (Relevant – CATIA V5 & Plastics)
Education: B.E/ B.Tech
, Diploma / Post Diploma – Mechanical
Preferred Candidates from NTTF , CIPET, DTDM, CITD.
Passed Outs: 2020, 2021 & 2022 (* For Training - Freshers from mentioned passed out years can also apply)
Client Location: Bengaluru & Chennai.
• Willing to work in rotational Shifts
Notice Period: Immediate to 15 days max.
Suitable and interested candidates can share their updated resume on dhriti.ps@vengala.co and can contact on Ph: 8884333122
👍2
We are Looking for *Junior Executive - Purchase* for a Manufacturing Industry located at Ambattur.
Position - Junior Executive- Purchase
Experience - Min 0-2 Yrs experience in Purchase department of a Manufacturing Alluminium Industries with ERP/Tally Working Knowledge etc
Gender - FEMALE
Qualification - DIPLOMA/ENGINEERING.
Salary package - Max 2 Lac CTC
Eligible and interested can share resume to hr@deccanextrusions.com
Position - Junior Executive- Purchase
Experience - Min 0-2 Yrs experience in Purchase department of a Manufacturing Alluminium Industries with ERP/Tally Working Knowledge etc
Gender - FEMALE
Qualification - DIPLOMA/ENGINEERING.
Salary package - Max 2 Lac CTC
Eligible and interested can share resume to hr@deccanextrusions.com
Hello All,
Urgently looking for Piping Design
Engineer - Creo/ Autocad - Pune.
Qualification - BE/ B.tech
Mech
Experience - 4 to 8 Years
Job Description -
We are actively seeking a CAD resource with extensive hands-on experience in Creo-Pro for piping design, as well as proficiency in AutoCAD.
The ideal candidate should have a proven track record of working within the large Oil & Gas industry, specializing in piping layouts preparation and design calculations.
Experience with industry-standard software such as Hexagon PPM, Aviva Plant, Bentley, Autodesk, Pro-Piping, or equivalent tools is highly desirable.
Additionally, the candidate should possess hands-on experience with engineering software like Windchill, SAP, and Oracle.
Interested candidates can share their CVs at manjushap@expertgs.com.
Let's connect and take your career to new heights!
Urgently looking for Piping Design
Engineer - Creo/ Autocad - Pune.
Qualification - BE/ B.tech
Mech
Experience - 4 to 8 Years
Job Description -
We are actively seeking a CAD resource with extensive hands-on experience in Creo-Pro for piping design, as well as proficiency in AutoCAD.
The ideal candidate should have a proven track record of working within the large Oil & Gas industry, specializing in piping layouts preparation and design calculations.
Experience with industry-standard software such as Hexagon PPM, Aviva Plant, Bentley, Autodesk, Pro-Piping, or equivalent tools is highly desirable.
Additionally, the candidate should possess hands-on experience with engineering software like Windchill, SAP, and Oracle.
Interested candidates can share their CVs at manjushap@expertgs.com.
Let's connect and take your career to new heights!
👍2
POSCO require Deputy manager for Marketing team (special product development
Qualification - B tech /B.E. Mechanical
Experience - 12-15 Years of experience
Industry Type - Steel processing only (CRNO)
Location - Sanand
interested person please share their resume on miken@posco.net
Qualification - B tech /B.E. Mechanical
Experience - 12-15 Years of experience
Industry Type - Steel processing only (CRNO)
Location - Sanand
interested person please share their resume on miken@posco.net
We are looking for dynamic Shift Engineers (#mechanicalengineering) for our #haridwar Factory.
Min Qualification- B. Tech Mechanical Engineering
(Only #uttarakhand based Candidate)
Experience required- 2 to 5 years
Knowledge of Kaizen, 5S and Problem solving tools is must.
CTC- based on Present CTC
Interested candidates can share their CV on Sourabh.shukla@luminousindia.com
Min Qualification- B. Tech Mechanical Engineering
(Only #uttarakhand based Candidate)
Experience required- 2 to 5 years
Knowledge of Kaizen, 5S and Problem solving tools is must.
CTC- based on Present CTC
Interested candidates can share their CV on Sourabh.shukla@luminousindia.com
Hi Everyone,
Greetings!!
We are Looking for Quality SQA position for our plant based at Chakan,Pune. Person must have rich experience in SQA Department
Location-Bajaj Electricals Ltd,Chakan,Pune.
Exp-8-10 yrs
Education- BE/B.tech
(Mechanical/Electricals)
Department-Quality SQA
If interested than please share your profile on
hr1.chakan@bajajelectricals.com
Greetings!!
We are Looking for Quality SQA position for our plant based at Chakan,Pune. Person must have rich experience in SQA Department
Location-Bajaj Electricals Ltd,Chakan,Pune.
Exp-8-10 yrs
Education- BE/B.tech
(Mechanical/Electricals)
Department-Quality SQA
If interested than please share your profile on
hr1.chakan@bajajelectricals.com
TECOSIM is Hiring!!!
Urgently looking for BIW Fixture Design Engineer!!!
Experience - 4+ Years
Location - Pune
Kindly share your resumes on shraddha.mejari@tecosim.in
Job Description -
· 3D Finish & 2D Detailing
· Operator Ergo Study
· Manual & Robotic fixture design
· BIW Fixture design as per SAVW standards
· Modification on existing tooling designs
· Design of handling tools & Jig-Templates
· BIW manufacturing Process Study
· Creating reports related to fixture documentation
· Engineering change feasibility study & cost estimation
· Gun accessibility study for Manual & Robotic fixtures
· Creating and releasing manufacturing drawings
· Complete description of manufacturing procedure for Fixtures
· Creation and maintenance of complete design, manufacturing & Maintenance documentation
Software: Catia only.
Kindly share your resumes on shraddha.mejari@tecosim.in
Urgently looking for BIW Fixture Design Engineer!!!
Experience - 4+ Years
Location - Pune
Kindly share your resumes on shraddha.mejari@tecosim.in
Job Description -
· 3D Finish & 2D Detailing
· Operator Ergo Study
· Manual & Robotic fixture design
· BIW Fixture design as per SAVW standards
· Modification on existing tooling designs
· Design of handling tools & Jig-Templates
· BIW manufacturing Process Study
· Creating reports related to fixture documentation
· Engineering change feasibility study & cost estimation
· Gun accessibility study for Manual & Robotic fixtures
· Creating and releasing manufacturing drawings
· Complete description of manufacturing procedure for Fixtures
· Creation and maintenance of complete design, manufacturing & Maintenance documentation
Software: Catia only.
Kindly share your resumes on shraddha.mejari@tecosim.in
👍2
One of mine friend Looking for Japanese. MNC Production Engineer
Location:- Neemrana(Rajasthan)
Education Qualification:- B.Tech
mechanical
Experience:- 2 to 3 year
Roles and Responsibility:-
Shift handling
Shop floor maintain
5S
Rejection control
Salary:- 3 to 4 lpa
Interested candidates can share CV
hr2.nmr@tihtokai.co.in
Location:- Neemrana(Rajasthan)
Education Qualification:- B.Tech
mechanical
Experience:- 2 to 3 year
Roles and Responsibility:-
Shift handling
Shop floor maintain
5S
Rejection control
Salary:- 3 to 4 lpa
Interested candidates can share CV
hr2.nmr@tihtokai.co.in
Hello Everyone
Urgent Hiring
NBC. C.K Birla Group is having an opening for B.E or B.Tech
Mechanical engineers who have experience in Maintenance department in Automobile Industry or Bearing company
Qualification: B.E or B.Tech
Mechanical
Experience: 4 yrs to 6 yrs ONLY
Location: Savli, Vadodara
Interested candidates can share their resumes in
medha.tyagi@nbcbearings.in
Urgent Hiring
NBC. C.K Birla Group is having an opening for B.E or B.Tech
Mechanical engineers who have experience in Maintenance department in Automobile Industry or Bearing company
Qualification: B.E or B.Tech
Mechanical
Experience: 4 yrs to 6 yrs ONLY
Location: Savli, Vadodara
Interested candidates can share their resumes in
medha.tyagi@nbcbearings.in
👍1
Axiscades is hiring for Aerospace Design and Stress engineers with 3-8 Yrs of experience.. interested can share your profile to Ajay.gaikwad@axiscades.in
Opening for Position – Jr Engineer
Qualification – Diploma in Mechanical
Job Location – Bengaluru
Experience – Candidate should have 1 – 3 years pf experience in Production Control Department.
Job Description –
Knowledge in Engineering change instruction management and packing specification development and implementation in new projects.
Preferred from any Japanese Autoparts manufacturing companies.
Send CV – interested candidates can send resume at manohara.is@trmn.biz
Qualification – Diploma in Mechanical
Job Location – Bengaluru
Experience – Candidate should have 1 – 3 years pf experience in Production Control Department.
Job Description –
Knowledge in Engineering change instruction management and packing specification development and implementation in new projects.
Preferred from any Japanese Autoparts manufacturing companies.
Send CV – interested candidates can send resume at manohara.is@trmn.biz
👍3
Opening for Position – Jr Engineer
Qualification – Diploma in Mechanical
Job Location – Bengaluru
Experience – Candidate should have 1 – 3 years pf experience in Production Control Department.
Job Description –
Knowledge in Engineering change instruction management and packing specification development and implementation in new projects.
Preferred from any Japanese Autoparts manufacturing companies.
Send CV – interested candidates can send resume at manohara.is@trmn.biz
Qualification – Diploma in Mechanical
Job Location – Bengaluru
Experience – Candidate should have 1 – 3 years pf experience in Production Control Department.
Job Description –
Knowledge in Engineering change instruction management and packing specification development and implementation in new projects.
Preferred from any Japanese Autoparts manufacturing companies.
Send CV – interested candidates can send resume at manohara.is@trmn.biz
Hello,
We are hiring !!!!
Position - Piping design engineer - creo
Location - Pune
Experience - 5 to 8 years
Required skills -
We are actively seeking a CAD resource with extensive hands-on experience in Creo-Pro for piping design, as well as proficiency in AutoCAD.
The ideal candidate should have a proven track record of working within the large Oil & Gas industry, specializing in piping layouts preparation and design calculations.
Experience with industry-standard software such as Hexagon PPM, Aviva Plant, Bentley, Autodesk, Pro-Piping, or equivalent tools is highly desirable.
Interested candidates can share their cv on manjushap@expertgs.com
We are hiring !!!!
Position - Piping design engineer - creo
Location - Pune
Experience - 5 to 8 years
Required skills -
We are actively seeking a CAD resource with extensive hands-on experience in Creo-Pro for piping design, as well as proficiency in AutoCAD.
The ideal candidate should have a proven track record of working within the large Oil & Gas industry, specializing in piping layouts preparation and design calculations.
Experience with industry-standard software such as Hexagon PPM, Aviva Plant, Bentley, Autodesk, Pro-Piping, or equivalent tools is highly desirable.
Interested candidates can share their cv on manjushap@expertgs.com
👍2
Hi Connections,
HCLTech looking #Wiring_Harness_Developemnt_Engineer for #Car_OEMproject
Location - Chennai, Pune
Positions - 18
Preferred from Wiring harness compoents developemnt background
interested candidates share your resume to venkateshp@hcl.com
HCLTech looking #Wiring_Harness_Developemnt_Engineer for #Car_OEMproject
Location - Chennai, Pune
Positions - 18
Preferred from Wiring harness compoents developemnt background
interested candidates share your resume to venkateshp@hcl.com
We are hiring for the following positions in #Mould_Design profile for #Sriperumbudur_Road, #Kanchipuram, #Chennai location.
1. Diploma Engineer Trainee : 12
2. Assistant Engineer : 26
3. Engineer : 8
4. Sr. Engineer : 2
Key Notes:
- Job profile : Designing Automotive heavy Mould parts with UGNX, VISI.
- Department: Design Engineering
- Experience : 2-6 years
- Qualification: Diploma / Degree in Tool & Die Technology.
Interested candidates may share their updated resume with proper subject line <Resume for Mold Design Kanchipuram> at satyaprakash.pandey@motherson.com.
1. Diploma Engineer Trainee : 12
2. Assistant Engineer : 26
3. Engineer : 8
4. Sr. Engineer : 2
Key Notes:
- Job profile : Designing Automotive heavy Mould parts with UGNX, VISI.
- Department: Design Engineering
- Experience : 2-6 years
- Qualification: Diploma / Degree in Tool & Die Technology.
Interested candidates may share their updated resume with proper subject line <Resume for Mold Design Kanchipuram> at satyaprakash.pandey@motherson.com.
👍1