CPU优化OTHER-高性能版.zip
6.9 KB
Processor optimization🫨
🗒️Description: CPU optimizations, tweaking CPU settings to improve performance, and additional metaphysical optimizations to increase daily usage. This version is the high performance version of the generic version. The battery optimization whitelist is in /storage/emulated/0/Android/battery_optimization.conf
📥Version: RELEASE-1.50-08272022-OTHER Plus
👤Author: 莱辣
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
🗒️Description: CPU optimizations, tweaking CPU settings to improve performance, and additional metaphysical optimizations to increase daily usage. This version is the high performance version of the generic version. The battery optimization whitelist is in /storage/emulated/0/Android/battery_optimization.conf
📥Version: RELEASE-1.50-08272022-OTHER Plus
👤Author: 莱辣
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
👍10❤2🥱1
小优化.zip
6.3 KB
Optimization of system processes MIUI🥰
🗒️Description: Disable several system processes that do not affect miui usage, mdnsd, mobile_log_d, dumpstate, emdlogger1, emdlogger3, mdlogger, aee log, consyslogger, bootlogoupdater
📥Version: 1.1
👤Author: Ku'an:longx
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
🗒️Description: Disable several system processes that do not affect miui usage, mdnsd, mobile_log_d, dumpstate, emdlogger1, emdlogger3, mdlogger, aee log, consyslogger, bootlogoupdater
📥Version: 1.1
👤Author: Ku'an:longx
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
👍6🥱5❤1
MIUIPerfSaver_v1.0.9.apk
2.4 MB
MIUI Performance Saver🆒
🗒️Description: Remove MIUI performance limits for apps, run apps at max frame rate. You can also limit the frame rate of a certain application to save battery, while remaining at 120Hz, or increase it while remaining at 60Hz
📥Version: 1.0.9
👤Author: test01wrk
👅Post in other languages
#Optimization
#Other
#LSPosed
🔗@magiskmodules22
🗒️Description: Remove MIUI performance limits for apps, run apps at max frame rate. You can also limit the frame rate of a certain application to save battery, while remaining at 120Hz, or increase it while remaining at 60Hz
📥Version: 1.0.9
👤Author: test01wrk
👅Post in other languages
#Optimization
#Other
#LSPosed
🔗@magiskmodules22
👍5
Thermal Qualcomm 7+ Gen 2 [Balance].zip
206.6 KB
⬆️Balanced - heating/performance⬆️
⬇️Perf - be careful, the emphasis on performance can cause a lot of heat!⬇️
⬇️Perf - be careful, the emphasis on performance can cause a lot of heat!⬇️
Thermal Qualcomm 7+ Gen 2 [Perf].zip
206.1 KB
Thermal Qcom 7+ Gen 2🔥
🗒️Description: Pure thermals. CPU at 2.91Ghz dynamically depending on temperature. Charging rapidly is slightly improved than stock thermal. The thermal is designed to reduce throttling by reducing clock speed and performance at higher temperatures than before. There are two versions - balanced and perf, be careful with the perf version, because your phone can overheat a lot
⚠️Notes: Uninstall all modules related to performance! Only for Qualcomm Snapdragon 7+ Gen 2! You can ruin your battery if you overheat your device frequently!⚠️
📥Version: v1.0
👤Author: Vito Hermawan
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
🗒️Description: Pure thermals. CPU at 2.91Ghz dynamically depending on temperature. Charging rapidly is slightly improved than stock thermal. The thermal is designed to reduce throttling by reducing clock speed and performance at higher temperatures than before. There are two versions - balanced and perf, be careful with the perf version, because your phone can overheat a lot
⚠️Notes: Uninstall all modules related to performance! Only for Qualcomm Snapdragon 7+ Gen 2! You can ruin your battery if you overheat your device frequently!⚠️
📥Version: v1.0
👤Author: Vito Hermawan
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
👍15❤1🔥1
Magisk-v26.2 (2).zip
11.9 MB
New version of Magisk, update 26.2!
📝Changelog v26.2:
•[MagiskBoot] Support extracting boot image from payload.bin
•[MagiskBoot] Support cpio files containing character files
•[MagiskBoot] Support listing cpio content
•[MagiskBoot] Directly handle AVB 1.0 signing and verification without going through Java implementation
•[Daemon] Make daemon socket a fixed path in MAGISKTMP
•[resetprop] Support printing property context
•[resetprop] Support only printing persistent properties from storage
•[resetprop] Properly support setting persistent properties bypassing property_service
•[MagiskSU] Support -g and -G options
•[MagiskSU] Support switching mount namespace to PID with -t
•MagiskPolicy] Fix patching extended permissions
•[MagiskPolicy] Support more syntax for extended permissions
•[MagiskPolicy] Support printing out the loaded sepolicy rules
•[App] Support patching boot image from ROM zips
•[App] Properly preserve boot.img when patching Samsung firmware with init_boot.img
👤GitHub
👅Post in other languages
📝Changelog v26.2:
•[MagiskBoot] Support extracting boot image from payload.bin
•[MagiskBoot] Support cpio files containing character files
•[MagiskBoot] Support listing cpio content
•[MagiskBoot] Directly handle AVB 1.0 signing and verification without going through Java implementation
•[Daemon] Make daemon socket a fixed path in MAGISKTMP
•[resetprop] Support printing property context
•[resetprop] Support only printing persistent properties from storage
•[resetprop] Properly support setting persistent properties bypassing property_service
•[MagiskSU] Support -g and -G options
•[MagiskSU] Support switching mount namespace to PID with -t
•MagiskPolicy] Fix patching extended permissions
•[MagiskPolicy] Support more syntax for extended permissions
•[MagiskPolicy] Support printing out the loaded sepolicy rules
•[App] Support patching boot image from ROM zips
•[App] Properly preserve boot.img when patching Samsung firmware with init_boot.img
👤GitHub
👅Post in other languages
👍9❤2😁1
Summer is over, 1st September(((
👍2😢2
yeaaaaaaaaaaaahh, 2,000 subs thanks
❤10🔥2💘2👍1🥱1
ReduceMIUI.zip
8.8 KB
Reduce MIUI Project
🗒Description: Optimize system services, close some system logs and other optimizations.
⚠️Notes: Miui rom only⚠️
📥Version: 3.2
👤Author: zjw2017
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
🗒Description: Optimize system services, close some system logs and other optimizations.
⚠️Notes: Miui rom only⚠️
📥Version: 3.2
👤Author: zjw2017
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
👍8🥱1
Performance Activity Manager.zip
2.1 KB
Performance Activity Manager🥶
🗒️Description: Configuration that is being useful for performance and ram usage and also in low cpu usage
📥Version: v1
👤Author: @Haruu1416
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
🗒️Description: Configuration that is being useful for performance and ram usage and also in low cpu usage
📥Version: v1
👤Author: @Haruu1416
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
👍6❤1
Magisk.v26.3.apk
12 MB
New version of Magisk, update 26.3!
📝Changelog v26.3:
•[General] Fix device information detection script
•[General] Update BusyBox to 1.36.1
•[General] Update toolchain that produces broken arm32 executables
•[App] Fix root service unable to bind on OnePlus devices
👤GitHub
👅Post in other languages
📝Changelog v26.3:
•[General] Fix device information detection script
•[General] Update BusyBox to 1.36.1
•[General] Update toolchain that produces broken arm32 executables
•[App] Fix root service unable to bind on OnePlus devices
👤GitHub
👅Post in other languages
👍6
Which root do you use ?
Anonymous Poll
53%
Magisk Stable
7%
Magisk Alpha
26%
Magisk Delta
15%
Kernel SU
Magisk Base || Magisk modules and other
NgenTouch_⚡️-v2.6(260).zip
NgenTouch_⚡️-v2.6.2(262).zip
5.3 KB
NgenTouch⚡️
update from v2.6 --> to v2.6.2
🗒️Description: Reduce touch latency on your device! Touch improve tweaks
📝Changelog: unknown
📥Version: v2.6.2
👤Author: @eraselk99
👅Post in other languages
#Touch
#Magisk
🔗@magiskmodules22
update from v2.6 --> to v2.6.2
🗒️Description: Reduce touch latency on your device! Touch improve tweaks
📝Changelog: unknown
📥Version: v2.6.2
👤Author: @eraselk99
👅Post in other languages
#Touch
#Magisk
🔗@magiskmodules22
👍8🥱5😁2❤1
MataTouchfix_v7_Taimen.zip
9.6 KB
Mata touch fix module
🗒️Description: Attempt to fix touch issues on the Essential PH-1
📥Version: v7_Taimen
👤Author: RogerF81
👅Post in other languages
#Touch
#Magisk
🔗@magiskmodules22
🗒️Description: Attempt to fix touch issues on the Essential PH-1
📥Version: v7_Taimen
👤Author: RogerF81
👅Post in other languages
#Touch
#Magisk
🔗@magiskmodules22
👍6🥱5😁3😢1
Magical_Overlayfs-3.2.1(30201).zip
6.7 MB
Magical Overlayfs✒️
🗒️Description: Use OverlayFS to make read-only system partitions become read-write partitions. OverlayFS MUST be supported by kernel!
⚠️Notes: works on systems BELOW a13 is not guaranteed⚠️
📥Version: v3.2.1
👤Author: HuskyDG
👅Post in other languages
#Other
#Magisk
🔗@magiskmodules22
🗒️Description: Use OverlayFS to make read-only system partitions become read-write partitions. OverlayFS MUST be supported by kernel!
⚠️Notes: works on systems BELOW a13 is not guaranteed⚠️
📥Version: v3.2.1
👤Author: HuskyDG
👅Post in other languages
#Other
#Magisk
🔗@magiskmodules22
👍7
turnip-23.3.0_A6xx-7xx_T-Alpha-6.zip
2.2 MB
Turnip Driver T-Alpha-6🎯
🗒️Description: Turnip is an open-source vulkan driver for devices for A6xx and A7xx.
1. Vulkan Bump : 1.3.261-develgit🔥🔥🔥
2. Add bump max xfb output to 128
3. Add Rename scoped_barrier -> barrier
4. Add skip non required extension structures
5. Add new Android-stub Lib 🔥🔥🔥
6. Add layered implementation of vkCmdBindIndexBuffer
7. Add common implementation for GetImageSubresourceLayout()
8. Add VK_FORMAT_{A8_UNORM,A1B5G5R5_UNORM_PACK16}_KHR
9. Add Use VkBufferUsageFlags2 in vk_buffer
⚠️Notes: Only for Snapdragon with Adreno 6xx-7xx. Devices with RAM below 6GB are strongly discouraged from using this driver. But if forced at your own risk⚠️
📥Version: v6
👤Author: @Mr_Purple_666
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
🗒️Description: Turnip is an open-source vulkan driver for devices for A6xx and A7xx.
1. Vulkan Bump : 1.3.261-develgit🔥🔥🔥
2. Add bump max xfb output to 128
3. Add Rename scoped_barrier -> barrier
4. Add skip non required extension structures
5. Add new Android-stub Lib 🔥🔥🔥
6. Add layered implementation of vkCmdBindIndexBuffer
7. Add common implementation for GetImageSubresourceLayout()
8. Add VK_FORMAT_{A8_UNORM,A1B5G5R5_UNORM_PACK16}_KHR
9. Add Use VkBufferUsageFlags2 in vk_buffer
⚠️Notes: Only for Snapdragon with Adreno 6xx-7xx. Devices with RAM below 6GB are strongly discouraged from using this driver. But if forced at your own risk⚠️
📥Version: v6
👤Author: @Mr_Purple_666
👅Post in other languages
#Optimization
#Magisk
🔗@magiskmodules22
👍11