AGNi Kernel v12.5 Stable EAS | Android 11.
Updated: 26/02/21

Changelog:
* better battery savings
* better game performance

-Merge kernel 4.4.258
-EAS scheduler: implement UCLAMP -modifications & optimisations.
-qcacld-3.0: Merge wifi CAF -LA.UM.9.2.r1-02500 (A11 tag).
-AGNi installer: add wifi speed optimisations.
-devfreq_boost: Introduce devfreq boost driver.
-msm: mdss: Boost DDR bus when committing a new frame boosting.
-net: allow configuring default qdisc via Kconfig.

Notes:
• Starting from kernel v12.0 stable, only Magisk 21.2+ and above supported.
• If you plan to use older Magisk, reflash Magisk after flashing kernel else you will lose magisk functioning.

✓ Download
✓ Alternative link
✓ Support

By @psndna881
Follow @lavender_Kernel
#Agni #Stable #EAS #Kernel #Pie #Q #R #Lavender

MeowKernel - r22 | Android 10/11.
Updated: 27/02/'21

Changelog:
• Upstreamed Linux version 4.4.258
• Compiled with GCC 10.2
• Checkout ashmem to v4.14
• Rewrite ashmem to improve clarity and performance
• Removed unused l2pc qos
• Fixed high idle drain issue
• qos: Remove pm_qos_update_request_timeout() API
• Run rcu nocb kthreads on little CPUs
• schedutil: Wait for up_delay before using non-efficient frequencies
• Using powersave governor for memlat
• Other fixes and iimprovement

✓ Download
✓ Support

Notes:
• You still have to flash related patches if you want to flash this kernel in MIUI Q

By @ratoriku
Follow @lavender_kernel
#Meow #Kernel #EAS #Q #R #Lavender

AGNi Kernel v12.6 Stable EAS | Android 11.
Updated: 27/02/21

Changelog:
dts: modify memlat bw_tbl & cpubw governor selection.
AGNI Installer: add uclamp tuning script.
AGNi Installer: change tcp stack parameters for wifi
mm: backport speculative page fault
writeback: hardcode dirty_expire_centisecs=3000 (30s)
cpuset: Restore tasks affinity while moving across cpusets
sched/core: Use SCHED_RR in place of SCHED_FIFO for all users
sched/rt: Change default SCHED_RR timeslice from 100 ms to 1 jiffy
msm: mdss: Reduce latency while processing atomic ioctls
msm: kgsl: Reduce latency while processing ioctls
ashmem: various commits
drivers: Slimbus audio bus Overclock
cpufreq: Remove cpufreq_times from CAF
qcom: qdsp6v2: Allow 320K AAC encoding

✓ Download
✓ Alternative link
✓ Support

By @psndna881
Follow @lavender_Kernel
#Agni #Stable #EAS #Kernel #Pie #Q #R #Lavender

Nexus Kernel V2 Stable EAS | Android 9/10/11
Updated: 28/02/21

✓ OldCam | 66Hz OldCam
✓ NewCam | 66Hz NewCam
✓ Support
✓ Channel


Changelog:
- Upstreamed to 4.4.258
- wireguard: update to 1.0.20210219 snapshot
- Skip heavy autorefresh checks when it's not enabled ( Probally better battery power saving )
- Disable GENTLE_FAIR_SLEEPERS ( Better Performance )
- Enable NEXT_BUDDY ( Better cache locality )
- Handle remote wakeups on remote CPUs
- Speed up calling of RCU tasks callbacks
- Update all Displays ( Better smoothness thx to overlord )
- Added blu_schedutil governor ( Thx to bish @akira_vishal )
- Fixed 2% battery drop ( Need Testing Thx @frost_id )
- cpufreq: Optimised proc files
- Reduced idle drain ( Thx @Ratoriku )


🤝 Credits:
Thx alot to @Peppe289 for his help and commits 😍🥰
Thx alot to @PredatorX91 for his source 🥰
Thx alot to @akira_vishal for the banner ❤️
Thx to all Beta Testers and Haters too 😘 ❤️

By @NotZeetaa
Follow @lavender_kernel
#Nexus #Stable #EAS #Kernel #Pie #Q #R #Lavender

BRAYON KERNEL | HYPER X1 | Android 10.
Update: 28/02/21

✓ Download

Changelog:
• cpufreq: stats: optimize proc files
• kernel: Boost DDR bus for a short amount of time when zygote forks
• ashmem: Rewrite to improve clarity and performance
• sched/rt: Change default SCHED_RR timeslice from 100 ms to 1 jiffy
• sched/core: Use SCHED_RR in place of SCHED_FIFO for all users
• devfreq: msm_adreno_tz: Decrease busy time ceiling
• And More

Credits:
• Thanks @Peppe289 for oc ❤️
• Thanks @ryuKizuha for Helping
• Thanks @Irfannim for Helping
• Thanks @frost_id for Helping
• Thanks @XiaomiRedmiNoteSette for Tester
• Thanks @krgykzt for Tester
• Thanks @DahLahMlas for Tester

Notes:
• Minor Update!
• The non oc version is "XR"
• wipe dalvic and cache after flashing this kernel

By @RocketFum
Follow @lavender_kernel
#BRAYON #EAS #LAVENDER #4.4 #R #Q #PIE #OC

Garuda Kernel 2.0 UCLAMP Edition
Updated: 01/03/21

✓ Support Group
✓ Download
✓ How To Download

Changelogs
- Implement UClamp
- Misc. Changes

How To Install:
1. Flash the UClamp Tune magisk module.
2. Reboot to recovery.
3. Flash the kernel.
4. Done!

Credits
Thanks to @pzqqt for backporting to v4.4.
@darkhz for UClamp port & tuning value.

By @felixfw16
Follow @lavender_kernel
#Garuda #Kernel #EAS #Pie #Q #R

xXxHormy-69 V1.0 EAS - 4.4 KERNEL | Android 11.
Released: 01/03/'21

▪️ OldCam
▪️ NewCam

Changelog:
• Upstream to linux v4.4.258
• Added blu_schedutil cpu governor
• msm: mdss: Boost DDR bus when committing a new frame to reduce jank for 60FPS rendering.
• ion , iommu patches for faster performance.
• Dynamic memory allocation patches for faster performance.
• Disabled Readhead ( Found it helps in performance and battery backup)

Credits:
• @PredatorX91 For his source 🥰
• @akira_vishal For teaching and helping 😘
• @NotZeetaa For helping
• @jaack08 For Hormy Banner
• Thanks to all beta testers

By @ImPrashantt
Follow @lavender_kernel
#xXxHormy-69 #EAS #P #Q #R #Kernel #Lavender

Yuki Kernel 4.19.177 | Android 11.
Updated: 03/03/21

Changelog:
- merge 'LA.UM.9.2.1.r1-06000-sdm660.0
- merge tag 'LA.UM.9.12.r1-10300-SMxx50.0'
- Merge 4.19.177
- Merge ASB-2021-01-05_4.19-stable
- Merge ASB-2021-02-05_4.19-stable
- Merge ASB-2021-03-05_4.19-stable
- Fix performance degradations
- Build with last Yuki ユキ Clang 13.0

✓ Download
✓ Mirror

By @TeamMEX_XDA
Follow @lavender_kernel
#Yuki #Kernel #4.19 #EAS #Q #R #Lavender

Mystic Kernel Update (4.19)
Version: R2.2
Updated: 04/3/21

Changelog :
- Kernel Upstream to Latest Linux Stable 4.19.178
- enable uclamp_task scheduler (What is Uclamp)
- drivers: thermal-cooling: Import Xiaomi changes
- disable mq-deadline and kyber (it can be showing none, just ignored, its normal)
- enable net_sch_cake and set as default
- Introducing KLapse - A kernel level livedisplay module
- Makefile: Use -O3 optimization level
- rcu: Fix a performance regression
- ARM64: sdm660: do not run nocb kthreads on big cores
-Toolchain: Using Ubuntu clang version 13.0.0
- and some miscellaneous improvement
- see my git-commit for more changelog.

Download : Mystic-R2.2

Fix Slow-Charging
👇🏻 READ TO REDUCE HUMAN ERROR 👇🏻
⚠️ ONLY FOR ROM WITH COMES 4.19 KERNEL ⚠️

By @okta_10
Follow @lavender_kernel
#mystic #jasmine #lavender #whyred

Mystic Kernel X5.1 - EAS | Android 9/10.
Updated: 04/03/'21

Changelog:
• Kernel Upstream to 4.4.259
• sched/uclamp: Add CPU's clamp buckets refcounting (What is Uclamp)
• drivers: power: add power supply cycle_count
• add and enable net_sch_cake also set as default
• back to using cpu_input_boost
• Revert "treewide: f7a: update from 'lavender-q-oss'"
• treewide: revert some ktweak
• arm: dts: Enable ULPS during idle PC
• mm: Reduce VM_MAX_READAHEAD to 128KB
• disable tracing/logging
• drivers: power: add timeouts to wakelocks
• glink: use kmem_cache pool for rx/tx
• Revert "msm: mdss: Boost DDR bus when committing a new frame"
• Toolchain: Using Ubuntu clang version 13.0.0
• and some miscellaneous improvement
• see my git-commit for more changelog.

✓ Download
✓ Support

Notes:
• Problem to download try this

By @okta_10
Follow @lavender_kernel
#Mystic #EAS #Kernel #Q #Pie #Lavender

Brayon Kernel AO X1.5 | Android 11.
Updated: 05/03/21

✓ Download [11.6 MB]

Changelog:
• Upstreamed To 4.4.259
• kernel: Boost whenever a zygote-forked process becomes a top app
• kernel: Boost to the max for a short amount of time when zygote forks
• cpu_input_boost: Introduce driver for event-based CPU boosting
• Revert "reduced -20v CPU voltage"
• Revert "sdm845: Block Tik Tok on the kernel-level"
• Revert "qpnp-smb2: raise weak charge current to 900mA"
• Compiled: with Proton Clang 13 "Yuki"
• And More

Credits:
• @Peppe289 for oc
• @ryuKizuha for Helping
• @Irfannim for Helping
• @frost_id for Helping
• @XiaomiRedmiNoteSette for Tester
• @krgykzt for Tester
• @DahLahMlas for Tester
• Thanks to all developers whose the commits i picked

Notes:
• Minor Update!
• If you think it's lacking, try updating your cellphone
• wipe dalvic and cache after flashing this kernel

By @RocketFum
Follow @lavender_kernel
#Brayon #EAS #Lavender #4.4 #R #Q #Pie #OC

Overlord Kernel v9.2 Stable - 4.4 KERNEL | Android 11.
Updated: 06/03/21

✓ OldCam version [11.0 MB]
✓ NewCam version [11.0 MB]
✓ Changelog
✓ Support

By @crashoverlord
Follow @lavender_kernel
#Overlord #Kernel #HMP #Stable #R #Lavender

MeowKernel - r23 | Android 10/11.
Updated: 06/03/'21

Changelogs:
• Update to Linux version 4.4.259
• Import Xiaomi usb changes
• Move syna_tcm_i2c_driver/nvt_i2c_driver into async probe
• Fixed a jitter regression
• Use prefer_idle for foreground
• Removed schedutil changes in r22
• Optimize boost logic for better battery life and performance
• Misc scheduling optimizations
• Other fixes and improvements

✓ Download
✓ Support

By @ratoriku
Follow @lavender_kernel
#Meow #Kernel #EAS #Q #R #Lavender

MeowKernel - r23 | Android 10/11.
Uclamp Version
Updated: 07/03/21

Changelog:
• Backport uclamp
• Introduce uclamp assist

Note:
• No need to use any scripts for uclamp

Credits:
• darkhzykh for backport uclamp to 4.9
• pzqqt for uclamp assist

✓ Download
✓ Support

By @ratoriku
Follow @lavender_kernel
#Meow #Kernel #EAS #Q #R #Lavender #experimental

Flame Gapps Release P | Q
Updated:06/03/21

✓ Download P
✓ Download Q
✓ Support

Changelog:
• Updated APKs
• Fixed gapps addon installation failure after updating ROM

Notes:
Only basic and full edition

Follow @lavender_kernel

Rave Kernel v2.6 | Android 9/10/11.
Updated: 07/03/'21

Changelog:
• Update firmware touchscreen and other drivers from lavender-q-oss
• Merge on LA.UM.8.2.r2-04000-sdm660.0 caf tag
• Tweak on lz4 algorithm
• Use analog dimming for better battery and visuals
• Remove debug log on adreno pwrlevels
• Disable MSM BCL
• Enable boost RCU
• Merge on v4.4.260 linux upstream

✓ Download OldCam | NewCam
✓ Support

By @Peppe289
Follow @lavender_kernel
#Rave #Kernel #HMP #Pie #Q #R #Lavender

Moonlight Kernel EAS | Android 9/10/11
Build date: 07/03/'21

Version: v2.1
Codename: Ishigami

✓ Download | Mirror
✓ Support Group

Changelogs:
• Merge linux tag v4.4.260
• Merge tag 'LA.UM.7.2.r1-09300-sdm660.0' for WiFi driver
• Update toolchain to latest Proton clang 13 build date 20210306
• Add CPU's clamp buckets refcounting (UClamp)
• Introduce and enable UClamp Assist (thanks to @pzqqt for this)
• Disable Adreno Idler by default
• schedutil: decrease up & down_rate_limit_us
• Revert "ashmem: Rewrite to improve clarity and performance"
• Clean up source and misc changes

Notes:
• No need to using any UClamp tune script or magisk module

By @frost_id
Follow @Moonlight_Updates

Brayon Kernel | X2.0 | Android 10.
Update: 08/03/21

✓ Download: OC | NonOC

Changelog:
• Upstreamed To 4.4.260
• Defconfig: Enable rcu boost
• drivers: base: update power from lavender-q-oss
• Introducing Touchboost driver(disable by default)
• Compiled: with Proton Clang 13
• And More

Credits:
• Thanks @Peppe289 for oc ❤️
• Thanks @ryuKizuha for Helping
• Thanks @Irfannim for Helping
• Thanks @frost_id for Helping
• Thanks @krgykzt for Tester
• Thanks @DahLahMlas for Tester
• Thanks to all developers whose the commits i picked

Notes:
• Minor Update!
• oc and non oc
• If you think it's lacking, try updating your cellphone :)
• wipe dalvic and cache after flashing this kernel

By @BecakMuda
Follow @lavender_kernel
#BRAYON #EAS #LAVENDER #4.4 #R #Q #PIE #OC #NonOC

Rocket Kernel | AO XR2.2 | Android 10.
Update: 08/03/21

✓ Download

Changelog:
• Upstreamed To 4.4.260
• Merge tag 'LA.UM.8.2.r2-04200-sdm660.0'
• drivers: base: update power from lavender-q-oss
• Introducing Touchboost driver(disable by default)
• Revert "Block Tik Tok on the kernel-level"
• Revert "qpnp-smb2: raise weak charge current to 900mA"
• lib: lz4: Update and tweak lz4 algorithm
• drivers: power: Fix 2% battery level drop
• Compiled: with Proton Clang 13
• And More

Credits:
• Thanks @Peppe289 for oc ❤️
• Thanks @ryuKizuha for Helping
• Thanks @Irfannim for Helping
• Thanks @frost_id for Helping
• Thanks @krgykzt for Tester
• Thanks @DahLahMlas for Tester
• Thanks to all developers whose the commits i picked

Notes:
• Minor update!
• If you think it's lacking, try updating your cellphone :)
• wipe dalvic and cache after flashing this kernel

By @BecakMuda
Follow @lavender_kernel
#ROCKET #HMP #LAVENDER #4.4 #R #Q #PIE

Mystic Kernel Update (4.19)
Version: R2.3
Updated: 08/03/21

Changelog :
- Latest Linux Stable 4.19.179
- Source: Merge tag 'LA.UM.9.2.1.r1-06300-sdm660.0'
- fw-api: Merge tag 'LA.UM.9.2.1.r1-06300-sdm660.0'
- staging/ion: Import of Xiaomi changes
- mm: speedup mremap on 1GB or larger regions - enable HAVE_MOVE_PUD
- mm: convert totalram_pages and totalhigh_pages variables to atomic
- compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING
-Toolchain: Using Debian clang version 13.0.0
- and some miscellaneous improvement
- see my git-commit for more changelog.

✓ Download: Mystic-R2.3
✓ Fix Slow: Charging

👇🏻 READ TO REDUCE HUMAN ERROR 👇🏻
⚠️ ONLY FOR ROM WITH COMES 4.19 KERNEL ⚠️

Follow @lavender_kernel
#mystic #jasmine #lavender #whyred

Halcyon Kernel 4.0 EAS/HMP | Android 10/11
Updated: 8 March 2021

✓ Download: EAS|HMP|MIUI
✓ Changelog
✓ Support

By @OdSazib
Follow @halcyon_updates
#Halcyon #EAS #HMP #Kernel #Q #R #SDM660