InfinityBox_install_CM2MT2_boot-pack_v2.30

mrd-lx1 testopint

tested root for unlock network
j200f u3
by z3x and new method
current firmware



UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Unlock
Selected model: SM-J200F
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-J200F
Android version: 5.1.1
PDA version: J200FXXU3ARL1
CSC version: J200FOXE3ARL1
Phone version: J200FXXU3AQC1
Product code: SM-J200FMDESEK
CSC country code: Ukraine
CSC sales code: SEK
Phone SN: RV8K51HKADT
IMEI:
HW version: MP 0.300
RF cal date: 20180605
Chip name: EXYNOS3475
Modem board: SHANNON308
Security patch: 2017-08-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED,ABSENT
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data... OK
HWID: AD 5A 41 D2 F2 12 9A AC C6 9A 20 AE 6D DE 76 FF
Calculating... OK
Unlocking... OK
Writing NV data... OK
Rebooting phone... OK
Unlock done

Done with Samsung Tool PRO v.44.4 [SM-J200F,Unlock]

Testpoint
Huawei Honor 50 NTH-NX9 | NTH-AN00 | NTH-TN00

A127F U4 REMOVE BOOTLOADER ERROR FIX

A127F U4 TESTED ROOT FILE

Your ffu file

Redmi Note 10 5G / Redmi Note 10T / Redmi Note 10T 5G (india) / Poco M3 Pro 5G #camellia #camellian (Put the device in fastboot mode and run the eng_rom__flash_all.bat file in the rom by double-clicking it.)

Mi 11 Ultra/Pro Engineer Firmware #star