ASIC Hub v1.9.1 is rolling in 😎

✔️ This hotfix tackles the startup issue caused by a corrupted service configuration file

A little FYI:
ASIC Hub will stop supporting Windows 7 & 8 and 32-bit builds for Raspberry PI boards soon

Have a nice end of the week, folks.

73%+ of $KAS has already been mined. The clock is ticking ⏰

Secure the remaining rewards with our ASIC-compatible Kaspa Pool. Daily PPS+ payouts at 0% TX fees are one click away.

Connect

Hiveon is officially SOC 2 certified.

Thank you to our dedicated team, partners, and loyal community for trusting us. We're committed to upholding compliance through annual SOC 2 audits. This is just the beginning.

A must-have update of the day — ASIC Hub v1.9.2 🤘

✔️ With this fix, we've resolved the ASIC Hub reboot issue on Windows. Now, in case of an error, ASIC Hub will restart properly.

✔️ We've also cast some significant improvements on API troubleshooting.

Make sure to install the update for an even better ASIC Hub performance. Hope you're having a fantastic week!

ASIC Hub v.1.9.3 is out

✔️ This update contains an important hotfix for a Windows installer issue, which may have led to unexpected ASIC Hub crashes.

How to update

Best news of the week: Site map in Hiveon OS got an upgrade 🤘

Here’s a brief overview of how you can use it for prompt troubleshooting and better control of your farm (even with thousands of workers):

✔️ Choose Triggers — potential issues or features that you want to be displayed on workers in the Troubleshoot view mode. Or hide workers with specific issues/features in Options

✔️ Switch between advanced Temperature, Fans, Hashrate, and Troubleshooting view modes to see real-time stats and issues on separate workers and locate them in seconds

✔️ Find specific workers by descriptions, names, or container names through a built-in search bar

✔️ Set your low hashrate threshold for the whole farm or individual workers

✔️ Set a timer for automatic switching between view modes for effortless farm monitoring

Open the Site map now to give all these tools a try 🥷

Detailed guide: https://hiveon.com/knowledge-base/ASIC-Hub/how-to-manage-the-site-map-in-hiveon-os/

ASIC Hub v1.10.0 Beta 2 now supports Monero (XMR) mining 🥷

Check out our recent enhancements:

✔️ Added support for Antminer X5
✔️ Added support Blink LED command for IceRiver devices
✔️ New command support: miner config
✔️ miner log command now supported for:
- Antminer (with Vnish and Braiins firmware, too)
- WhatsMiner
- Innosilicon
- Goldshell
- iPollo
- JasMiner
✔️ Fixed an error in getting stats from some legacy Bitmain Antminer devices
✔️ Fixed a bug when applying Flight Sheets on the new IceRiver firmware (including overclocked KS0)
✔️ Fixed reported algorithm for Antminer KA3
✔️ Fixed switching Whatsminer power modes via FS if the user has the same pool settings
✔️ Fixed applying farm default Flight Sheet on add worker
✔️ Fixed the disappearing devices on Braiins firmware during scanning
✔️ Fixed errors during network scan

Update

Keep an eye out for more updates, and have an amazing week.

Merry Christmas and Happy Holidays 🧡

Wishing you warm family moments, your mining farms to become even more efficient, and the market sentiment to support your business. May the Satoshi power be with you.

Friday heads-up, hivers 👇

The fastest way to get Hiveon Firmware for your ASIC miners with Amlogic control boards is by scheduling a remote installation through:

✔️ Live chat at hiveon.com
✔️ Emailing to bee@hiveon.com

Fresh GPU updates just landed 🥷

Hiveon OS Linux Client v0.6-225:
✔️ Support for memory temperature display on Nvidia 545 series drivers
✔️ Improved support for AMD 7000 series and Intel Arc
✔️ Other minor improvements and fixes

Hiveon OS Linux Beta Image hiveos-0.6-225-beta@240131:
✔️ Based on Ubuntu 20.04 distro & Linux LTS kernel 6.1.65
✔️ Nvidia v535.154.05
✔️ AMD kernel module: v6.3.2401.0, ROCm OCL: v5.4.6
✔️ Intel Arc kernel module: v6.3.13_bp, OCL: v23.30.26918.9
✔️ Integrated some out-of-kernel tree USB Wi-Fi dongles
✔️ Integrated the latest Hiveon OS Linux Client v0.6-225

Update the current image by using hive-replace -y --beta tool or download it from hiveon.com and burn it using Balena Etcher.

Product notice: Kaspa Pool will cease operations on February 12 to make room for more impactful upgrades & products our community has asked for. Please redirect your mining devices to another pool by that time. Rest assured, all mined coins will be fully paid out to the wallets as per your flight sheets.

FAQ or What Should I Do: hiveon.net/kaspa
Ask our lightning-fast support team: bee@hiveon.com or Live chat on hiveon.com

See you in Hiveon OS 🧡

ASIC Hub v1.11.0 Beta 1 has just touched down 🥷

✔️ Added support for Bitmain Antminer KS3
✔️ Added reporting Antminer devices power modes
✔️ Added reporting WhatsMiner devices power modes
✔️ Added reporting ASIC Hub device load average
✔️ Added support for devices on Luxor firmware
✔️ Improved miner identification for Antminer devices
✔️ Fixed issues with adding WhatsMiner devices
✔️ Fixed logging warnings if a device on Braiins firmware doesn't have an overview endpoint
✔️ Fixed showing voltage on devices on Vnish firmware
✔️ Fixed issues with applying Flight Sheets on devices with Vnish firmware
✔️ Fixed issues with applying Flight Sheets on Antminer devices
✔️ Fixed issues with rebooting Antminer devices

To access the new features, switch to the BETA channel in the ASIC Hub settings and update your ASIC Hub installation.

How to update

Please note that WhatsMiner power management and miner suspend/resume features require WhatsMiner API to be enabled.

Looks like our new hiver is trying to say something with his sitemap.

Happy Valentine's Day 🧡

ASIC Hub v1.11.0 Beta 2 is out

✔️ An important hotfix for Beta 1 eliminates an issue that could cause ASIC Hub crashes in rare cases

How to update

Beyond the basics: 7 Hiveon OS commands you might not have tried yet 👇

1. cgminer-get summary
Usage: Displays all information in JSON format for ASIC miners running in ASIC Hub.

2. miner log
Usage: Shows the miner log for most ASIC/GPU rigs.

3. nvtool --throttle
Usage: Quickly identifies if Nvidia GPUs are throttling due to thermal or power limits.

4. watch -n.1 "grep \"^[c]pu MHz\" /proc/cpuinfo"
Usage: Displays the current CPU core clock speeds in CPU/GPU rigs.

5. nvidia-smi dmon -s et -d 10 -o DT
Usage: Rapidly checks for Nvidia PCIe errors, quickly identifying faulty risers.

6. hive-replace --list
Usage: Reflashes Hiveon OS on your CPU/GPU rig without removing the boot drive; choose from recent stable or beta images.

7. amd-ocl-install
Usage: Changes AMD amdgpu & rocm stack OpenCL libraries

Join us on X (formerly Twitter) | Follow us on LinkedIn

Rig size matters — in your favor.

We've updated Hiveon OS pricing to consider your rig's GPU count, offering lower costs for workers with fewer cards. Effective March 11th, the price for rigs with fewer than 6 cards will proportionally drop, ranging from $3 to $0.50.

The updated free tier includes 2 workers and doesn't have any coin/pool restrictions. CPU mining is available for no extra cost in GPU rigs, while standalone is priced at $0.50/month.

See the full update: hiveon.com/pricing

FAQ or The new billing model cases explained

Join us on X (formerly Twitter) | Follow us on LinkedIn

7 Hiveon OS commands you might not have tried yet | Part 2:

1. nvidia-smi dmon -s et -d 10 -o DT
Usage: shows whether risers are generating errors. Good risers & cables have 0s in the 'PCI errs' column

2. intel-info
Usage: shows the status/info of your Intel dGPUs

3. nvtool -h
Usage: shows all options for the nvtool command (throttle, etc.)

4. amd-info
Usage: shows the status/info of your AMD devices

5 nvidia-info
Usage: shows the status/info of your Nvidia devices

6. nvidia-driver-update
Usage: updates your Nvidia drivers

7. Keyboard shortcuts as a bonus:
Ctrl+C
This combination stops any running command.

Ctrl A+D
Use this command to get out of the screen (miner or agent). The screen will remain working.

Ctrl A+A
With this combination, switch between screens if you have multiple miners running.

Practice: https://the.hiveos.farm

Join us on X (formerly Twitter) | Follow us on LinkedIn

Power modes and consumption monitoring for S21: ASIC Hub v1.11.0 Beta 3 is out 👇

New miners:
✔️ Auradine Teraflux AT1500
✔️ ePIC BlockMiner 520i

New features:
✔️  Introduced power mode adjustments for Antminer S21 on stock firmware (also available in ASIC Hub v1.10.0 stable)
✔️ Monitoring of Antminer power consumption now available in Hive OS
✔️ Launched Autoscan service for continuous ASIC miner detection

Improvements:
✔️ Network scan speed has been significantly improved

Bug fixes:
✔️ Fixed an issue with applying Antminer work mode
✔️ Fixed error on running miner config command on Antminer L7

How to update

To access the new features, switch to the BETA channel in the ASIC Hub settings and update your ASIC Hub installation.

Join us on X (formerly Twitter) | Follow us on LinkedIn

Maintenance completed: action required

The system is now operational. We will continue to closely monitor for any potential issues over the next 24 hours.
Please perform the following recommended technical action now: https://x.com/hiveonofficial/status/1778875521712968085

Hiveon values your loyalty and is offering a week of waived fees until 23:59 UTC on April 17th. Any fees paid recently will be refunded.