Another round of updates for hivers on the GPU side 🥷

Your requests don’t go unnoticed; that’s a fact. And it’s also why we’ve added support for AstroMiner and OneZeroMiner

✔️With AstroMiner, you can mine DERO, the most profitable coin for CPU mining

✔️With OneZeroMiner, you can mine DNX on Nvidia GPUs with a 2x higher efficiency than you’d get using SRBMiner

What’s gonna happen to LTC miners after the upcoming Litecoin Halving?

Our VP Arthur Pan and Chief Commercial Officer Dmytro Gomon will speak at the online
ViaBTC seminar devoted to LTC halving, and the challenges and opportunities it will bring for holders, miners, and ecosystem supporters.

Mark your calendars and tune in to join the discussion on June 16th, 11:00 AM, UTC 🤘

Our team is packing their bags and getting ready to talk about Hiveon Energy in Miami.

Visit our booth at the world's largest #Bitcoin Mining Conference and tune in to the keynote "How can you use crypto mining to change the environment?" by Andrew Garanin, our Head of Energy Projects.

Mining Disrupt 25-27 July / Booth #85

See you there 🧡

It's Friday, which means we have new updates for you, hivers 🥷

ASIC-Hub v1.9.0 Beta 1 is here and packed with new awesome features:

✔️ Added LED control and miner workmode support for WhatsMiner devices
✔️ Fixed miner algorithm information for Bitmain Antminer D7
✔️ Added restart miner command to restart ASIC Hub remotely from the Hiveon OS dashboard (yes, even without having local access to the computer where the Hub is installed)
✔️ ASIC Hub configuration immediately takes effect after saving
✔️ Reduce network traffic for device statistics
✔️ All 36 Goldshell miner models are now supported in ASIC Hub
Check out the full list here

Reading between the lines of Bloomberg's article about "struggling Bitcoin miners".

Tune in to the discussion starring Andrii Garanin, the Head of Hiveon Energy.

Set the reminder and join us today on Twitter at 4 PM Eastern Time.

Gear up, hivers. This week's updates are game-changers 🥷

ASIC-Hub v1.9.0 Beta 2 is here:

✔️ Added support for IceRiver KS0, KS1, KS2
✔️ Added support for JasMiner X16-Q and X4
✔️ Added support for Antminer D9 and E9
✔️ Added support for iPollo B1L, V1 series, X1
✔️ Added support for Goldshell KDBoxII
✔️ Added miner start and miner stop commands
✔️ Added miner suspend and miner resume support for WhatsMiner and Antminer S19 devices
✔️ Added WhatsMiner power limit control using the whatsminer-power-limit miner config field
✔️ Fixed temperature information for Antminer S19 and Vnish devices
✔️ General stability improvements

To access the new features switch to the BETA channel in the ASIC Hub settings and update your ASIC Hub installation.

Please note that WhatsMiner power management and miner suspend/resume features require WhatsMiner API to be enabled.

The wait is over — Hiveon Kaspa Pool is up and running 🤘

You, hivers, have been asking us to launch a Hiveon Pool for #KAS. We heard you loud and clear, and Hiveon Kaspa Pool went live today.
Enjoy daily payouts (50 KAS min) with 0 transaction fees and only 1% pool fee.

Join now

The Ethereum Classic network is continuously evolving, and so are we.

We've adjusted the Hiveon ETC Pool difficulty to 9 GH to provide compatibility with not only GPUs but with ASIC miners as well.

Plug in your iPollo, Jasminer, and Bitmain Antminer E9, E9 Pro ASIC miners and enjoy our 0% fee pool.

Join Hiveon ETC Pool

While you might notice fewer shares in your miner statistics, your payouts remain steady and unaffected.

It’s a new dawn, it’s a new day, it’s a new release 🔥
Beta Image based on Ubuntu 20.04 & Linux LTS kernel 6.1.35

✔️ Updated misc device IDs and related tools (USB, PCI-E, AMD GPUs)
✔️ Added support Nvidia driver v535 series (updated nvtool to v1.8.1 which fixes temperature sensors reading broken in v535 series drivers)
✔️ Added support CUDA RTL v12.2 (nvidia-driver-install tool updated, added RTL v12.2.2)
✔️ Fixed static fan control on Vega2/Navi/Navi2 AMD GPUs appeared in previous v0.6-223 on some configurations
✔️ Autofan v3.26: fixes & improvements
✔️ Update amd-ocl-install to support ROCm up to v5.6.x
✔️ Improved support related to the release of further OS Images
✔️ Other misc fixes & improvements
✔️ AMD Ryzen 7000 CPU temp support added

Update the current image by using hive-replace -y --beta tool or download it from hiveon.com and burn it using Balena Etcher.

Call your ASIC miners and tell them they’re welcome in Hiveon Kaspa Pool.

Because starting today, the pool supports all models, from IceRiver KAS KS0 to Antminer Bitmain KS3. And it’s compatible with Nicehash rental, too.

Join now

The address for ASIC miners: kas.asic.hiveon.com:4444

Don’t give in to Monday blues — check out ASIC Hub v1.9.0 Stable 🔥
This update comes with some awesome new features that we think you'll love:

✔️ Added support for:
- IceRiver KS0, KS1, KS2, KS3, KS3M and KS3L
- Antminer D9 and E9
- iPollo B1L and X1
- Jasminer X16-Q and X4
- Goldshell KDBoxII, CKBoxII, HS6SE, KD5Pro, and MiniDOGEII
✔️ IceRiver got special treatment — we’ve fixed disconnection issues, plus hashrate and fan percentage calculation for this device
✔️ Now you can suspend or resume a miner using miner stop and miner start commands. Currently, this feature is supported on:
- Antminer S19 series
- Antminer on Vnish or Braiins firmware
- WhatsMiner (requires WhatsMiner API to be enabled)
- iPollo devices
✔️ Added a few cool features for WhatsMiner ASIC miners:
- LED blink support
- Miner mode control from miner config using whatsminer-work-mode parameter
- Power limit management from miner config using whatsminer-power-limit parameter
✔️ Bitmain’s Antminer devices received a bunch of small fixes:
- Fixed miner algorithm reporting for Antminer D7
- Fixed temperature information for Antminer S19 and devices on Vnish firmware
✔️ In case of any issue, now you can restart ASIC Hub remotely using the restart command
✔️ Need to modify ASIC Hub settings through the web interface? Now you can apply changes without doing a manual ASIC Hub restart
✔️ Reduced network usage — ASIC Hub uses less network bandwidth to report device stats
✔️ We've also made some improvements to the overall stability of ASIC Hub to ensure that your dashboard runs smoothly

A little FYI:
▪️ WhatsMiner power management and miner suspend/resume features require WhatsMiner API to be enabled. See this article to learn how to enable WhatsMiner API
▪️ ASIC Hub will stop supporting Windows 7 & 8 and 32-bit builds for Raspberry PI boards soon

Thank you for choosing ASIC Hub!

ASIC Hub v1.9.1 is rolling in 😎

✔️ This hotfix tackles the startup issue caused by a corrupted service configuration file

A little FYI:
ASIC Hub will stop supporting Windows 7 & 8 and 32-bit builds for Raspberry PI boards soon

Have a nice end of the week, folks.

73%+ of $KAS has already been mined. The clock is ticking ⏰

Secure the remaining rewards with our ASIC-compatible Kaspa Pool. Daily PPS+ payouts at 0% TX fees are one click away.

Connect

Hiveon is officially SOC 2 certified.

Thank you to our dedicated team, partners, and loyal community for trusting us. We're committed to upholding compliance through annual SOC 2 audits. This is just the beginning.

A must-have update of the day — ASIC Hub v1.9.2 🤘

✔️ With this fix, we've resolved the ASIC Hub reboot issue on Windows. Now, in case of an error, ASIC Hub will restart properly.

✔️ We've also cast some significant improvements on API troubleshooting.

Make sure to install the update for an even better ASIC Hub performance. Hope you're having a fantastic week!

ASIC Hub v.1.9.3 is out

✔️ This update contains an important hotfix for a Windows installer issue, which may have led to unexpected ASIC Hub crashes.

How to update

Best news of the week: Site map in Hiveon OS got an upgrade 🤘

Here’s a brief overview of how you can use it for prompt troubleshooting and better control of your farm (even with thousands of workers):

✔️ Choose Triggers — potential issues or features that you want to be displayed on workers in the Troubleshoot view mode. Or hide workers with specific issues/features in Options

✔️ Switch between advanced Temperature, Fans, Hashrate, and Troubleshooting view modes to see real-time stats and issues on separate workers and locate them in seconds

✔️ Find specific workers by descriptions, names, or container names through a built-in search bar

✔️ Set your low hashrate threshold for the whole farm or individual workers

✔️ Set a timer for automatic switching between view modes for effortless farm monitoring

Open the Site map now to give all these tools a try 🥷

Detailed guide: https://hiveon.com/knowledge-base/ASIC-Hub/how-to-manage-the-site-map-in-hiveon-os/

ASIC Hub v1.10.0 Beta 2 now supports Monero (XMR) mining 🥷

Check out our recent enhancements:

✔️ Added support for Antminer X5
✔️ Added support Blink LED command for IceRiver devices
✔️ New command support: miner config
✔️ miner log command now supported for:
- Antminer (with Vnish and Braiins firmware, too)
- WhatsMiner
- Innosilicon
- Goldshell
- iPollo
- JasMiner
✔️ Fixed an error in getting stats from some legacy Bitmain Antminer devices
✔️ Fixed a bug when applying Flight Sheets on the new IceRiver firmware (including overclocked KS0)
✔️ Fixed reported algorithm for Antminer KA3
✔️ Fixed switching Whatsminer power modes via FS if the user has the same pool settings
✔️ Fixed applying farm default Flight Sheet on add worker
✔️ Fixed the disappearing devices on Braiins firmware during scanning
✔️ Fixed errors during network scan

Update

Keep an eye out for more updates, and have an amazing week.