Please open Telegram to view this post
VIEW IN TELEGRAM
Forwarded from F SOCIETY
Only 4 Members Left For Soon I Will Post The SS7 Mapper for Pc!
Please Share And Thank You Everyone! @fsocietyofficial
Please Share And Thank You Everyone! @fsocietyofficial
Forwarded from F SOCIETY
Hey Geeks What is up !
So In this tutorial, I will demonstrate ""how to crack WPA annd WPA2"
●All the content are Written by @h3mant.
As we all know that WEP. WPA2 uses a stronger encryption algorithm, AES, that's very difficult to crack—but not impossible.
●When a user connects to a WPA2 Access point, the client and AP ue a "4 way handshake" to authenticate the client. This is how we can crack the encryption: if we can capture the 4 way handshake, we can crack the password. We will again use aircrack-ng, and this time we will use a dictionary attack to crack the password.
Step 1) Put your WiFi Adapter into Monitor mode, to monitor and capture traffic on the network:
●Code : airmon-ng start wlan0
OR IF YOU WANT TO REMAIN ANONYMOUS FROM A SYSTEM ADMINISTRATOR THEN RUN THIS COMMAND
●Code:
ifconfig wlan0 down
macchanger -m 99:88:77:66:55:44 wlan0
ifconfig wlan0 up
Step 2) Begin capturing traffic:
We will again use airodump-ng to capture packets sent over the wireless network. First we need to get the information about the network we are trying to crack:
●Code: airodump-ng mon0
Step 3) Capture traffic on the target AP:
Now we will focus on a single network, make sure its encryption is WPA2. Run this command:
●Code:airodump-ng --bssid 00:11:22:33:44:55 -c 11 --write hemantexample mon0
replace 00:11:22:33:44:55 with the bssid of the target network, and 11 with the channel. "hemantexample" is the file the captured packets will be written to.
Step 4) Force a 4 way handshake:
To capture the password, we need to capture the authentication process. We can quickly do this by forcing them off the network, whereby there system will automatically reauthenticate them. Open a new terminal window and run this command:
●Code:aireplay-ng --deauth 1 -a 00:11:22:33:44:55 mon0
The 1 is the number of de-authenticate frames you want to send, and 00:11:22:33:44:55 is the bssid of the access point.
If the command was successful, we should see "WPA handshake." in the top corner of our airodump terminal. We now have the encrypted password.
Step 5) Cracking the password:
We can now use aircrack-ng to crack the encrypted password in our "hemantexample" file. This is a dictionary attack, so the attack is only as good as the dictionary file you use. Use Ctrl + C to stop the airodump process running, and then run this command in a new terminal:
●Code:aircrack-ng example-01.cap -w '/root/desktop/examplehemantworldlist'
We don't need to be in range of the network to crack the password. You can also use multiple wordlists to crack the password, but double ups or triple ups in the 2 lists will increase the cracking time as the program will have to check the same password twice or thrice.
●●If you want
""CrackStation's Password Cracking Dictionary""
""SkullSecurity's Password Dictionaries""
""Fast Cupp made Password Dictionaries""
Then contact me @h3mant●●
It took me 2 hours to write this so please guys share my effort and feel free to ask any doubt about this tutorial
Written by @h3mant
So In this tutorial, I will demonstrate ""how to crack WPA annd WPA2"
●All the content are Written by @h3mant.
As we all know that WEP. WPA2 uses a stronger encryption algorithm, AES, that's very difficult to crack—but not impossible.
●When a user connects to a WPA2 Access point, the client and AP ue a "4 way handshake" to authenticate the client. This is how we can crack the encryption: if we can capture the 4 way handshake, we can crack the password. We will again use aircrack-ng, and this time we will use a dictionary attack to crack the password.
Step 1) Put your WiFi Adapter into Monitor mode, to monitor and capture traffic on the network:
●Code : airmon-ng start wlan0
OR IF YOU WANT TO REMAIN ANONYMOUS FROM A SYSTEM ADMINISTRATOR THEN RUN THIS COMMAND
●Code:
ifconfig wlan0 down
macchanger -m 99:88:77:66:55:44 wlan0
ifconfig wlan0 up
Step 2) Begin capturing traffic:
We will again use airodump-ng to capture packets sent over the wireless network. First we need to get the information about the network we are trying to crack:
●Code: airodump-ng mon0
Step 3) Capture traffic on the target AP:
Now we will focus on a single network, make sure its encryption is WPA2. Run this command:
●Code:airodump-ng --bssid 00:11:22:33:44:55 -c 11 --write hemantexample mon0
replace 00:11:22:33:44:55 with the bssid of the target network, and 11 with the channel. "hemantexample" is the file the captured packets will be written to.
Step 4) Force a 4 way handshake:
To capture the password, we need to capture the authentication process. We can quickly do this by forcing them off the network, whereby there system will automatically reauthenticate them. Open a new terminal window and run this command:
●Code:aireplay-ng --deauth 1 -a 00:11:22:33:44:55 mon0
The 1 is the number of de-authenticate frames you want to send, and 00:11:22:33:44:55 is the bssid of the access point.
If the command was successful, we should see "WPA handshake." in the top corner of our airodump terminal. We now have the encrypted password.
Step 5) Cracking the password:
We can now use aircrack-ng to crack the encrypted password in our "hemantexample" file. This is a dictionary attack, so the attack is only as good as the dictionary file you use. Use Ctrl + C to stop the airodump process running, and then run this command in a new terminal:
●Code:aircrack-ng example-01.cap -w '/root/desktop/examplehemantworldlist'
We don't need to be in range of the network to crack the password. You can also use multiple wordlists to crack the password, but double ups or triple ups in the 2 lists will increase the cracking time as the program will have to check the same password twice or thrice.
●●If you want
""CrackStation's Password Cracking Dictionary""
""SkullSecurity's Password Dictionaries""
""Fast Cupp made Password Dictionaries""
Then contact me @h3mant●●
It took me 2 hours to write this so please guys share my effort and feel free to ask any doubt about this tutorial
Written by @h3mant
Forwarded from F SOCIETY
ss7MAPer-master.zip
51.6 MB
Telegram can be hacked with ss7 analyzer (it is a PC software that can hack phone number)
See 👇 videos for more help
http://www.youtube.com/watch?v=ZlCCVVjmNQE
http://www.youtube.com/watch?v=fDJ-88
See 👇 videos for more help
http://www.youtube.com/watch?v=ZlCCVVjmNQE
http://www.youtube.com/watch?v=fDJ-88
Forwarded from F SOCIETY
A hacker’s access to SS7 technical product information, SS7 protocol message generation and the SS7 network itself is easy and inexpensive. This makes it all too tempting for hackers to take advantage of its vulnerabilities for financial gain and illegal access to sensitive information.
connection. There are multiple ways to get a SS7 /Sigtran connection.
SS7 Addressing (Global Title and Point Code) : First thing for a SS7 connection , you should have a Global Title and a point code (international) , some times you can use any point code (local, between you and mobile operator )depends on ss7 connection provider. If you are a registered mobile operator , then you get this from standard GSM body . A new network code is assigned to you , so that you can have big range of global titles or MSISDNs and IMSIs.
If not a mobile operator, you can take global title on lease from a mobile operator. Once you have GT , now there are following options.
SS7 connection via an aggregator: In this you can connect to a SS7 agrregator and they can publish you GT, on all networks. So any traffic coming to your GT , will be forwarded by aggregator towards your node or application. Mostly MVNO does this , they have GT ranges, those are published to aggregator for connecting mobile network operators globally.
Directly with a Mobile Operator: In😒 this you will have direct links with mobile operators , each will set routing for your GT , towards the serving node. In this you need to connect each mobile operators Individually.
connection. There are multiple ways to get a SS7 /Sigtran connection.
SS7 Addressing (Global Title and Point Code) : First thing for a SS7 connection , you should have a Global Title and a point code (international) , some times you can use any point code (local, between you and mobile operator )depends on ss7 connection provider. If you are a registered mobile operator , then you get this from standard GSM body . A new network code is assigned to you , so that you can have big range of global titles or MSISDNs and IMSIs.
If not a mobile operator, you can take global title on lease from a mobile operator. Once you have GT , now there are following options.
SS7 connection via an aggregator: In this you can connect to a SS7 agrregator and they can publish you GT, on all networks. So any traffic coming to your GT , will be forwarded by aggregator towards your node or application. Mostly MVNO does this , they have GT ranges, those are published to aggregator for connecting mobile network operators globally.
Directly with a Mobile Operator: In😒 this you will have direct links with mobile operators , each will set routing for your GT , towards the serving node. In this you need to connect each mobile operators Individually.
Forwarded from F SOCIETY
SS7 Point Code Converter (com.oprs.ss7pcconverter)
Version: 1.0(2)
Last Updated: 07-Oct-2017
Size: 2.45MB
@fsocietyofficial
Version: 1.0(2)
Last Updated: 07-Oct-2017
Size: 2.45MB
@fsocietyofficial
Forwarded from F SOCIETY
com.oprs.ss7pcconverter.apk
2.4 MB
Forwarded from F SOCIETY
📚WannaCry ransomware attack: 📷
📌 The WannaCry ransomware attack was a May 2017 worldwide cyberattack by the WannaCry ransomware cryptoworm, which targeted computers running the Microsoft Windows operating system by encrypting data and demanding ransom payments in the Bitcoin cryptocurrency. It propagated through EternalBlue, an exploit in older Windows systems released by The Shadow Brokers a few months prior to the attack. While Microsoft had released patches previously to close the exploit, much of WannaCry's spread was from organizations that had not applied these, or were using older Windows systems that were past their end-of-life. WannaCry also took advantage of installing backdoors onto infected systems.
The attack was stopped within a few days of its discovery due to emergency patches released by Microsoft, and the discovery of a kill switch that prevented infected computers from spreading WannaCry further. The attack was estimated to have affected more than 200,000 computers across 150 countries, with total damages ranging from hundreds of millions to billions of dollars. Security experts believed from preliminary evaluation of the worm that the attack originated from North Korea or agencies working for the...
https://t.me/joinchat/AAAAAEgh6fnuOBZBCR8k1g
📌 The WannaCry ransomware attack was a May 2017 worldwide cyberattack by the WannaCry ransomware cryptoworm, which targeted computers running the Microsoft Windows operating system by encrypting data and demanding ransom payments in the Bitcoin cryptocurrency. It propagated through EternalBlue, an exploit in older Windows systems released by The Shadow Brokers a few months prior to the attack. While Microsoft had released patches previously to close the exploit, much of WannaCry's spread was from organizations that had not applied these, or were using older Windows systems that were past their end-of-life. WannaCry also took advantage of installing backdoors onto infected systems.
The attack was stopped within a few days of its discovery due to emergency patches released by Microsoft, and the discovery of a kill switch that prevented infected computers from spreading WannaCry further. The attack was estimated to have affected more than 200,000 computers across 150 countries, with total damages ranging from hundreds of millions to billions of dollars. Security experts believed from preliminary evaluation of the worm that the attack originated from North Korea or agencies working for the...
https://t.me/joinchat/AAAAAEgh6fnuOBZBCR8k1g
Forwarded from F SOCIETY
A New Challenge For Our Channel If We Reach 700 Members Am going to Post Wannacry Ransomware!
So Share And Support Us!
https://t.me/joinchat/AAAAAEgh6fnuOBZBCR8k1g
So Share And Support Us!
https://t.me/joinchat/AAAAAEgh6fnuOBZBCR8k1g
Forwarded from F SOCIETY
SS7_WP_A4.ENG.0036.01.DEC.28.2014 (1).pdf
1.4 MB
Forwarded from F SOCIETY
Our Official Online Forum Page!
https://fsoci3tyhackers.createaforum.com/
https://fsoci3tyhackers.createaforum.com/
Forwarded from F SOCIETY
Best Hacking Operating systems brought to you by F SOCIETY Team
Kali Linux: https://www.kali.org/downloads/
Parrot OS: https://www.parrotsec.org/download.fx
BackBox: https://backbox.org/download
BlackArch: https://blackarch.org/downloads.html
Pentoo: http://www.pentoo.ch/download/
DEFT Linux: http://www.deftlinux.net/download/
Caine: http://www.caine-live.net/page5/page5
Kali Linux: https://www.kali.org/downloads/
Parrot OS: https://www.parrotsec.org/download.fx
BackBox: https://backbox.org/download
BlackArch: https://blackarch.org/downloads.html
Pentoo: http://www.pentoo.ch/download/
DEFT Linux: http://www.deftlinux.net/download/
Caine: http://www.caine-live.net/page5/page5