SERVER & CLIENT
The network computer that contains the hard drives, printers, and other
resources that are shared with other network computers is called a server.
This term comes up repeatedly, so you have to remember it.
Any computer that’s not a server is called a client. You have to remember this
term, too.
Only two kinds of computers are on a network: servers and clients.
~ @geekcode
The network computer that contains the hard drives, printers, and other
resources that are shared with other network computers is called a server.
This term comes up repeatedly, so you have to remember it.
Any computer that’s not a server is called a client. You have to remember this
term, too.
Only two kinds of computers are on a network: servers and clients.
~ @geekcode
LIST OF WORKING OF TYPICAL NETWORK
https://telegra.ph/List-of-typical-working-of-Network-04-12
~ @geekcode
Please share & support us ❤️😊
https://telegra.ph/List-of-typical-working-of-Network-04-12
~ @geekcode
Please share & support us ❤️😊
Telegraph
List of typical working of Network
To use a network, you don’t really have to know much about how it works. Still, you may feel a little bit better about using the network if you realize that it doesn’t work . A network may seem like magic, but it isn’t. The following is a list of the inner…
What is Topologies?
You can cable and construct computer networks in different ways. Nowadays the most common variant is the so called star network, where all computer are connected
to a central device.The disadvantage is that this device is a single point of failure and the whole network will break down if it gets lost.
This disadvantage can be circumstanced by using redundant (multiple) devices.
Another possibility is to connect all computers in one long row one after the other, the so called bus network. The disadvantage of this topology is that each computer must have two network cards and depending on the destination the traffic gets routed through all computers of the net. If one of them fails or has too high a load the connections behind
that host are lost.
The author has seen only a few bus networks this decade and all consisted of two computers directly connected to guarantee time critical or traffic intensive services like database replication, clustering of application servers or synchronization of backup servers. In all cases the reason for a bus network was to lower the load of the star network.
As last variant the ring network should be mentioned, which as the name implies connects all computers in a circle. The ring network has the same disadvantages as a bus network except that the network will only fail partly if a computer gets lost as long as
the net can route the traffic the other way round. The author has not seen a productive ring
network, but some wise guys whisper that it it the topology of backbones used by ISPs and
large companies.
Additionally one often reads about LAN (Local Area Network), WAN (Wide Area Network) and sometimes even about MAN (Middle Area Network). A LAN is a local network that’s most of the time limited to a building, floor or room.
In modern networks most computers are connected on a LAN over one or more switches.
Multiple LANs connected over a router or VPN are called MAN.
~ @geekcode
You can cable and construct computer networks in different ways. Nowadays the most common variant is the so called star network, where all computer are connected
to a central device.The disadvantage is that this device is a single point of failure and the whole network will break down if it gets lost.
This disadvantage can be circumstanced by using redundant (multiple) devices.
Another possibility is to connect all computers in one long row one after the other, the so called bus network. The disadvantage of this topology is that each computer must have two network cards and depending on the destination the traffic gets routed through all computers of the net. If one of them fails or has too high a load the connections behind
that host are lost.
The author has seen only a few bus networks this decade and all consisted of two computers directly connected to guarantee time critical or traffic intensive services like database replication, clustering of application servers or synchronization of backup servers. In all cases the reason for a bus network was to lower the load of the star network.
As last variant the ring network should be mentioned, which as the name implies connects all computers in a circle. The ring network has the same disadvantages as a bus network except that the network will only fail partly if a computer gets lost as long as
the net can route the traffic the other way round. The author has not seen a productive ring
network, but some wise guys whisper that it it the topology of backbones used by ISPs and
large companies.
Additionally one often reads about LAN (Local Area Network), WAN (Wide Area Network) and sometimes even about MAN (Middle Area Network). A LAN is a local network that’s most of the time limited to a building, floor or room.
In modern networks most computers are connected on a LAN over one or more switches.
Multiple LANs connected over a router or VPN are called MAN.
~ @geekcode
the-ultimate-mysql-crash-course-2021
Enroll here :
https://www.udemy.com/course/the-ultimate-mysql-crash-course-2021/?couponCode=MYSQLCOURSE21
#share & #supportus
~ @geekcode
Enroll here :
https://www.udemy.com/course/the-ultimate-mysql-crash-course-2021/?couponCode=MYSQLCOURSE21
#share & #supportus
~ @geekcode
Udemy
The Ultimate MySQL Crash Course 2022
Learn MySQL in No Time
ISO/OSI MODEL ?
According to the pure doctrine the ISO/OSI layer model, technically separates a computer network into seven layers.
Each layer has a clearly defined task and each packet passes them one after another in
the operating systems kernel up to the layer it’s operating on.
~ @geekcode
According to the pure doctrine the ISO/OSI layer model, technically separates a computer network into seven layers.
Each layer has a clearly defined task and each packet passes them one after another in
the operating systems kernel up to the layer it’s operating on.
~ @geekcode
What is Protocol?
A protocol is a set of rules and standards that basically define a language that devices can use to communicate. There are a great number of protocols in use extensively in networking, and they are often implemented in different layers.
Some low level protocols are TCP, UDP, IP, and ICMP. Some examples of application layer protocols, built on these lower protocols, are HTTP (for accessing web content), SSH, TLS/SSL, and FTP.
~ @geekcode
A protocol is a set of rules and standards that basically define a language that devices can use to communicate. There are a great number of protocols in use extensively in networking, and they are often implemented in different layers.
Some low level protocols are TCP, UDP, IP, and ICMP. Some examples of application layer protocols, built on these lower protocols, are HTTP (for accessing web content), SSH, TLS/SSL, and FTP.
~ @geekcode
What is Firewall?
A firewall is a program that decides whether traffic coming into a server or going out should be allowed. A firewall usually works by creating rules for which type of traffic is acceptable on which ports. Generally, firewalls block ports that are not used by a specific application on a server.
~ @geekcode
A firewall is a program that decides whether traffic coming into a server or going out should be allowed. A firewall usually works by creating rules for which type of traffic is acceptable on which ports. Generally, firewalls block ports that are not used by a specific application on a server.
~ @geekcode
What is NAT?
NAT stands for network address translation. It is a way to translate requests that are incoming into a routing server to the relevant devices or servers that it knows about in the LAN. This is usually implemented in physical LANs as a way to route requests through one IP address to the necessary backend servers.
~ @geekcode
NAT stands for network address translation. It is a way to translate requests that are incoming into a routing server to the relevant devices or servers that it knows about in the LAN. This is usually implemented in physical LANs as a way to route requests through one IP address to the necessary backend servers.
~ @geekcode