HardPy 0.23.0 is out ⚡️

What’s new:

• Test reports are now 30% shorter thanks to removing empty fields
• The CouchDB initialization process has been updated to avoid the noisy error logs caused by the previous setup
• A few minor fixes were also included

A small release, but a cleaner and smoother one.

HardPy 0.24.0 — what's new

Two new features are landing in the operator panel.

Reports storage menu
A new menu in the panel header lets you see at a glance where test reports are being stored and how to fix any configuration problems. It shows the status of StandCloud and the active local backend (CouchDB or JSON files), turns red when there is a blocking issue, and provides direct links to the CouchDB panel, the local JSON folder, or the documentation.

Test history
Previous test runs are now accessible directly in the operator panel — no need to open CouchDB or inspect JSON files manually. The history table shows the run name, start time, result, and serial number, with expandable rows for full details. A "Show more" button handles pagination.
Note: test_history is disabled by default. Each test run creates a new document in the database, so database growth needs to be considered before enabling it. To turn it on, set frontend.test_history: true in your config.

🚀 𝗣𝘄𝗿𝗕𝗹𝗼𝗰𝗸 𝟯𝟮𝟯 𝗶𝘀 𝗹𝗶𝘃𝗲 𝗼𝗻 𝗖𝗿𝗼𝘄𝗱 𝗦𝘂𝗽𝗽𝗹𝘆!

We built PwrBlock 323 to bring programmable DUT power directly into automated test fixtures and HIL setups.

⚡ 1–32 V
⚡ Up to 3 A / 92 W
💻 SCPI + Python-friendly control
🔌 USB-C PD powered
🛠 Designed for automated testing

After months of prototyping and testing, we’re now raising funds to manufacture the first production batch.

Check out the campaign and support PwrBlock 323:

https://www.crowdsupply.com/everypin/pwrblock-323



And if you know someone building hardware test fixtures — please share it with them.

#everypin #pwrblock #hardblocks #crowdfunding #crowdsupply

Reliable connectivity for CM5 flashing

Flashing Raspberry Pi CM5 at scale puts serious wear on standard board-to-board connectors, leading to unreliable contact and failed flashing.

That’s why Eloprint developed a robust production fixture for repeatable CM5 connection, while Everypin provided the automation layer.

The system:
- checks CM5 power;
- automates flashing;
- verifies successful boot;
- records every result.

The workflow runs on HardPy, our open-source testing framework, and uploads production data to the cloud for traceability, remote monitoring, and analytics.

Read more about the CM5 Flash Jig (https://everypin.io/solutions/cm5-flash-jig)

#RaspberryPi #ComputeModule5 #CM5 #Manufacturing #ProductionTesting #TestAutomation #HardwareTesting #OpenSource #Traceability #HardPy #Everypin #Eloprint

CM4 vs CM5 — a curious DFT difference

We mapped the test points on both Raspberry Pi Compute Modules and found an interesting difference.

CM5 gives you direct access to power, USB, boot control, UART, and Ethernet — enough to build a pogo-pin fixture for flashing and production testing.

CM4 has plenty of test points too, but we couldn’t find USB, 5 V, or boot control among them.

So what were the CM4 test points actually designed for? Factory testing? Direct eMMC access? Something else?

Check out interactive testpoint maps for these SoMs:
CM5 → https://everypinio.github.io/cm5-flash-jig/test-points/cm5/
CM4 → https://everypinio.github.io/cm5-flash-jig/test-points/cm4/

Same idea. Two generations. Very different approach to DFT.

If you need robust flashing solution for CM4 or CM5 check here (https://bit.ly/4zUaHcx)

#Everypin #RaspberryPi #CM4 #CM5 #DesignForTest #HardwareTesting #TestFixture #PogoPins

𝐍𝐨𝐭 𝐞𝐯𝐞𝐫𝐲 𝐞𝐥𝐞𝐜𝐭𝐫𝐨𝐧𝐢𝐜𝐬 𝐭𝐚𝐬𝐤 𝐧𝐞𝐞𝐝𝐬 𝐚 𝐟𝐮𝐥𝐥-𝐬𝐢𝐳𝐞 𝐛𝐞𝐧𝐜𝐡 𝐩𝐨𝐰𝐞𝐫 𝐬𝐮𝐩𝐩𝐥𝐲 ⚡

Sometimes you’re bringing up a board, debugging a prototype, or working with the same DUT again and again. You know what it needs — you just want a compact and convenient way to power it.

That’s one of the two use cases PwrBlock 323 was designed for from the start: everyday bench work and integration into automated test systems.

The idea is simple — use the same programmable power supply while developing at your desk, and later integrate it into your test or production setup when the project grows.

PwrBlock 323 is now on Crowd Supply https://www.crowdsupply.com/everypin/pwrblock-323/updates/sometimes-you-just-need-power-pwrblock-323-on-the-bench

#PwrBlock323 #Everypin #ElectronicsEngineering #HardwareEngineering #BenchPowerSupply #HardwareTesting #TestAutomation #EmbeddedSystems #Prototyping #ElectronicsLab #TestEngineering #HardwareDevelopment

𝗣𝘄𝗿𝗕𝗹𝗼𝗰𝗸 𝟯𝟮𝟯 𝗳𝗶𝗿𝗺𝘄𝗮𝗿𝗲 𝗶𝘀 𝗻𝗼𝘄 𝗼𝗽𝗲𝗻 𝘀𝗼𝘂𝗿𝗰𝗲.

The actual firmware running on the device is now available on GitHub — from SCPI and USB to hardware control.

𝐓𝐚𝐤𝐞 𝐚 𝐥𝐨𝐨𝐤 𝐢𝐧𝐬𝐢𝐝𝐞. 𝐁𝐮𝐢𝐥𝐝 𝐢𝐭. 𝐄𝐱𝐩𝐥𝐨𝐫𝐞 𝐢𝐭. 𝐈𝐦𝐩𝐫𝐨𝐯𝐞 𝐢𝐭. 💜

𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗳𝘂𝗹𝗹 𝘂𝗽𝗱𝗮𝘁𝗲 𝗼𝗻 𝗖𝗿𝗼𝘄𝗱 𝗦𝘂𝗽𝗽𝗹𝘆 → https://www.crowdsupply.com/everypin/pwrblock-323/updates/the-code-behind-pwrblock-323-is-now-open?utm_source=telegram&utm_medium=social&utm_campaign=Open+source&utm_content=Open+source

#PwrBlock323 #EVERYPIN #OpenSource #OpenSourceHardware #OpenSourceFirmware #EmbeddedSystems #FirmwareDevelopment #ElectronicsEngineering #HardwareEngineering #TestAutomation #STM32 #GitHub