ECUTools EU πŸ‡ͺπŸ‡Ί
97 members
1 photo
25 links
ECU Tools β€” equipment online store
for сhip-tuning and auto diagnostics.
Download Telegram
to view and join the conversation
‼️KESSv2 and K-TAG Update!‼️

πŸ“Œ KESSv2 and K-TAG: Continental SIMOS18 VAG: CVN added on thousands of vehicles!

🌟 CVN, meaning Calibration Verification Number, is the calibration checksum of the file written inside the ECU. The CVN control constitutes a method which can verify if the calibration of the ECU is consistent with the one supplied by the manufacturer of the vehicle.
Thanks to the new functionalities, also by writing a Modified file, the CVN will always correspond to the Original File.

The CVN number will be displayed in the ID protocol, in the area of the software version.

βœ… KESSv2 β€” Protocol 473: Continental SIMOS18.1 β€” Continental SIMOS18.2 TC1791
βœ… KESSv2 β€” Protocol 733 β€” Continental SIMOS18.10
βœ… K-TAG β€” Protocol 830 β€” Continental SIMOS18.1 β€” Continental SIMOS18.2 β€” TC1791
βœ… K-TAG β€” Protocol 1451 β€” Continental SIMOS18.10 TC1791

πŸ“ Vehicle list and more information

πŸ”Ή KESSv2 Master
πŸ”Ή
KESSv2 Slave

πŸ”Ή K-TAG Master
πŸ”Ή K-TAG Slave
❗️HP Tuners Update! ❗️

HP Tuners MPVI2 for Ford Ranger and Mercedes

πŸ”Ή HP tuners software now supports:

β–Ί 2019 Ford Ranger 2.3L Ecoboost
Required: MPVI2
Licensing cost is 4 credits

β–Ί 2011–2018 Mercedes CLS550 4.7L V8
Required: MPVI2
Licensing cost is 6 credits

β–Ί 2012–2018 Mercedes CLS63 AMG 5.5L
Required: MPVI2
Licensing cost is 6 credits

β–Ί 2013–2016 Mercedes GL550
Required: MPVI2
Licensing cost is 6 credits

β–Ί 2018+ Ford Focus 1.5L Ecoboost
Required: MPVI2
Licensing cost is 4 credits

HP Tuners MPVI2
❗️KESSv2: Continental Simos 8.4 via OBD allows:

βœ… Virtual reading and writing for the Continental Simos 8.4 VAG ECU, including Audi3.0 V6 CAKA and CAJA brand, that were produced starting from 2008

Continental Simos 8.4 VAG

β˜‘οΈ Audi A6 C6 3.0 V6 TFSI Quattro
β˜‘οΈ Audi A6 C6 3.0 V6 TFSI Quattro Tiptronic
β˜‘οΈ Audi Q7 3.0 V6 TFSI Quattro
β˜‘οΈ Audi S4 B8 3.0 V6 TFSI Quattro 6MT
β˜‘οΈ Audi S4 B8 3.0 V6 TFSI Quattro 7AT
β˜‘οΈ Audi S4 Avant B8 3.0 V6 TFSI Quattro 6MT
β˜‘οΈ Audi S5 3.0 V6 24v TFSI quattro
β˜‘οΈ Audi S4 Avant B8 3.0 V6 TFSI Quattro 7AT
β˜‘οΈ Audi S5 3.0 V6 24v TFSI quattro S-Tronic

πŸ”Ή Kess v2 Master
πŸ”Ή
Kess v2 Slave
❗️FLEX version 5.5.0.0 is ready❗️

OBD and Boot solutions in FLEX for Volvo, Renault and PSA

βœ… OBD programming (unlock in bootloader) of the Delphi DCM7.1
βœ… Boot protocols for TRW EMS2 ECUs equipped on Volvo and Renault branded cars
βœ… Bench solutions for the recalibration of Bosch EDC17CV45 on Manitou vehicles

For the newly added protocols, fixes and improvements check this

β–Ί FLEX Master
β–Ί FLEX Slave
❗️New CombiLoader module: SIMOS12/18 VAG (J2534)

➑️ Reading/writing of SIMOS12.1/18.1 ECUs installed in VAG vehicles.

βœ… SIMOS12.1 ECUs - bench work without opening the ECU.
βœ… SIMOS18.1 ECUs - bench work, opening the ECU is required.
Identification, errors reading/reset.
Automatic checksum calculation.
Full reading/writing excluding the OTP area.

❗️Dialink is required.

πŸ”Έ SIMOS12/18 VAG (J2534)
πŸ”Έ CombiLoader
❗️ K-Tag Update: 2020 Ford Super Duty in Service Mode ❗️

βœ… Read and write the ECU Bosch MD1CP006 equipped on the new V8 Power Stroke by using the Service Mode.

You won’t have to open the ECU!

➑️ Ford Bosch MD1CP006
Ford F-250 Super Duty 6.7 V8 Power Stroke 6AT
Ford F-350 Super Duty 6.7 V8 Power Stroke 6AT
Ford F-450 Super Duty 6.7 V8 Power Stroke 6AT
Ford F-550 Super Duty 6.7 V8 Power Stroke 6AT

βœ… Full vehicle list

πŸ”Έ K-Tag Master
πŸ”Έ K-Tag Slave
⭐️ HP tuners update! ⭐️

HP tuners software now supports:

β–Ί VW Golf 2.0T, years ranging from 04-19
πŸ“ Required: MPVI2
Licensing cost is 4 credits for the ECM and 4 credits for the TCM

β–Ί The 2013-2018 Porsche 991 GT3 and GT3 RS
πŸ“ Required: MPVI2, the latest version of VCM Suite Beta software, an internet connection
Licensing cost is 10 credits

β–Ί The 2013-2017 Mercedes A45 AMG 2.0L
πŸ“ Required: MPVI2
Licensing cost is 6 credits

β–Ί The 2013-2017 Mercedes GLA45 AMG
πŸ“ Required: MPVI2
Licensing cost is 6 credits

β–Ί The 2015-2020 Toyota Hilux 2.4L (2GD-FTV) and 2.8L (1GD-FTV) Diesel applications
πŸ“ Required: the latest version of VCM Suite Beta software, MPVI2, an internet connection
Licensing cost is 4 credits

β–Ί The 2012-2017 Mercedes G63 AMG
πŸ“ Required: MPVI2
Licensing cost is 6 credits

βœ… HP Tuners MPVI2
❗️ BitBox 3.3.4 rev. 1 Update ❗️

New modules: Ford Continental Diesel CAN introduced with the following families:

βœ… FID255: Ford Continental SID208 TC1797 CAN (FULL OBD) - reading/writing/checksums calculation
βœ… FID256: Ford Continental SID211 TC1791S CAN (FULL OBD) - reading/writing/checksums calculation
βœ… FID259: Ford Continental SID206 MPC563+Ext.Flash - reading/writing/checksums calculation
βœ… FID261: Ford Continental SID803A MPC561+Ext.Flash - reading/writing checksums calculation

Improvements and fixes:

β˜‘οΈ Fixed some errors for Kia/Hyundai SIM2K-260 for reading/writing when password is already known
β˜‘οΈ Fixed timeout error with erasing memory on MB Delphi CRD2.XX
β˜‘οΈ Fixes for some ECU types for China Delphi DCM3.7AP during writing on vehicle

πŸ”₯ For prices please refer to the links below:

πŸ”Ή BitBox
πŸ”Ή Ford Continental Diesel CAN
πŸ”₯ FLEX version 5.6.0.0 is here! πŸ”₯

➑️ BENCH and BOOT solutions for Kia and Hyundai

Works on the Bench with the Kefico CPEGD and CPGDSH ECUs installed on Kia and Hyundai, on models such as Stonic 1.0 T-GDI 2017 and i30 1.6 T-GDI 2017.

βœ… Reading and Writing the complete contents of the Internal Flash and Internal EEPROM
βœ… ECU opening is not requited

Also new are the Bootloader protocols for programming BOSCH KEFICO KME1.9.3.1 and BOSCH EDC15C13 engine control units.

β˜‘οΈ Check the new protocols here

As well as some bug fixes and software improvements.
❗️ K-TAG: new protocols for Bosch EDC16 in Service Mode! ❗️

βœ… Reading and Writing
βœ… Cloning
βœ… Without opening the ECU Bosch EDC16

In addition to the three new protocols dedicated to EDC16, there now is the protocol in Boot for Bosch EDC15.

➑️ Bosch EDC16C3, Bosch EDC16C7
➑️ Bosch EDC16U31
➑️ Bosch EDC16C39
➑️ Bosch EDC15C7 ST10C167
HERE

βœ… Full vehicle list

πŸ”Έ K-Tag Master
πŸ”Έ K-Tag Slave
⭐️❗️ ECULite - a brand new item in our stock for Toyotas, Mitsubishi and Volkswagen ❗️⭐️

ECULite is modern and user-friendly software for editing the map area of various ECUs. This program allows you to edit the calibrations of the vehicle files to perform basic chip tuning.

The following maps are available:
βœ… spark advance
βœ… DTC detection mask of the catalytic converter system malfunction
βœ… exhaust gas recirculation (EGR) valve
βœ… oxygen sensor
βœ… throttle valve
βœ… optimum torque
βœ… torque request, etc.

For Diesel vehicles the following maps are available:
βœ… boost pressure
βœ… torque request
βœ… injection start phases
βœ… injection time
βœ… fuel pressure
βœ… exhaust gas recirculation valve (EGR)
βœ… Error Detection Mask etc.

⭐️ Specifics:
- User-friendly interface with the possibility of displaying calibrations in tables, 3D and 2D charts
- Display of error mask and calibration constants
- Two files comparison function with the ability to copy calibrations from the compared file
- Calibration editing, setting of the absolute value and changing the percentage ratio
- Modular design of calibration description maps
- USB dongle

❗️ Please note:
It is best to upload files to Toyota Denso and Mitsubishi Melco 3 using PCMflash. This flasher does checksum corrections before the writing. The ECULite editor does not make checksum corrections for the above ECU, as it is not necessary.

It is recommended that the file loading into Bosch EDC16U1 (31/34) ECUs should be done using Combiloader or Kess v2. The Kess v2 does checksum corrections before they are written in the ECU. In the near future Combiloader will also be able to do checksum corrections.

⭐️ ECULite
❗️ PRE-SALE License 35 - Hyundai-Kia MB90F025(26)/MB91F037(047)+93Π‘66 OBDII ❗️

The module allows to work with dashboards via OBD or on the bench using a J2534 device.

Available functions:

βœ… Mileage reading/writing
βœ… 93C66 EEPROM reading/writing
Reading/writing take 1–2 minutes depending on the J2534 device.

Supported J2534 devices:
DrewTech Mongoose
DrewTech CarDAQ
Scanmatik 2 PRO
SMS β€” DiaLink
Chipsoft J2534 Lite (with disabled OpenPort2 support)
Chipsoft J2534 Mid (with disabled OpenPort2 support)
Chipsoft J2534 Pro (with disabled OpenPort2 support)

❗️ Openport 2.0 is NOT supported!

Suggested car list:
βœ… Hyundai Equus 2013–2015 Full TFT LCD(Fujitsu MB91F037+93C66)
βœ… Hyundai Centennial 2013–2015 Full TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Cadenza 2013_2016 7Β» TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Carens 2012–2016 Small LCD(Fujitsu MB90F026+93C66)
βœ… Kia Carens 2012–2016 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Carnival 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
βœ… Kia Sedona 2014+ Small segment LCD(Fujitsu MB91F047+93C66)
βœ… Kia Cerato 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
βœ… Kia K3 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
βœ… Kia Forte 2012–2016 Segment LCD(Fujitsu MB90F025+93C66)
βœ… Kia Cerato 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
βœ… Kia K3 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
βœ… Kia Forte 2012–2017 SuperVision Monochrome(Fujitsu MB91F037+93C66)
βœ… Kia Cerato 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia K3 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Forte 2012–2017 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Quoris 2012–2014 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Quoris 2012–2014 SuperVision TFT LCD(Fujitsu MB91F037+93C66)
βœ… Kia Quoris 2015–2017 SuperVision Full TFT LCD(Fujitsu MB91F037+93C66)

❗️ The license will be available after 24.11.2020

For price and information please refer to the links below:

⭐️ MD flasher
⭐️ License 35 - Hyundai-Kia_MB90F025(26)/MB91F037(047)+93Б66_OBDII
⭐️ New Autotuner Module for Land Rover (JLR) 3.0 MHEV ⭐️

ECU: Bosch MG1CS028

➑️ Autotuner is now able to perform the following operations:

βœ… Bench Read
βœ… Bench Write

On the following vehicles:

β˜‘οΈ Jaguar 3.0 P340 MHEV - Bosch MG1CS028
β˜‘οΈ Land Rover 3.0 P340 MHEV - Bosch MG1CS028
β˜‘οΈ Land Rover 3.0 P360 MHEV - Bosch MG1CS028
β˜‘οΈ Land Rover 3.0 P400 MHEV - Bosch MG1CS028

Autotuner Master
Autotuner Slave
❗️ KESSv2 presents Diesel Toyota GEN III ❗️

βœ… Real reading and writing via OBD for the new Hilux and Land Cruiser equipped on the DENSO ECU and the microcontroller R7F701202 in the 748 KESSv2 protocol.

If you already have the 748 protocol, everything is included: real reading and writing through OBD with KESSv2.

➑️ Denso R7F701202

β˜‘οΈ Toyota Hilux 2.4 16V VTN
β˜‘οΈ Toyota Hilux 2.8 16V VTN
β˜‘οΈ Toyota Land Cruiser 2.8 16V D-4D VTN

The support the new Land Rover 5.0 V8 SVR and SCV8 equipped with Bosch MED 17.8.32 has also been added!

If you already have the 706 protocol, you can immediately start working, even with an expired subscription.

➑️ BOSCH MED17.8.32

β˜‘οΈ Land Rover L494 5.0 V8 SCV8
β˜‘οΈ Land Rover L494 5.0 V8 SVR

⭐️ KESSv2 Master
⭐️ KESSv2 Slave
❗️ PRE-ORDER License 47 - LADA/RENAULT/DACIA_KEY_BCM_CONTINENTAL_OBDII ❗️

The module allows working with BCM Continental via OBD or on the bench.

Available functions:
βœ… BCM identification; Error codes reading/erasing;
βœ… Flash memory reading/writing (without the loading area);
βœ… Vin change; BCM virginizing;
βœ… PINCODE reading (necessary to write keys into BCM),
βœ… ISK code reading, transponder password reading;
βœ… BCM training (virgin unit pairing);
βœ… ECM training (new engine ECU);
βœ… Key programming, even if lost.

Pin code reading takes ~1 minute depending on the J2534 device.

β˜‘οΈ Supported J2534 devices:
DrewTech Mongoose
DrewTech CarDAQ
Scanmatik 2 PRO
SMS β€” DiaLink
Chipsoft J2534 Lite (with disabled OpenPort2 support)
Chipsoft J2534 Mid (with disabled OpenPort2 support)
Chipsoft J2534 Pro (with disabled OpenPort2 support)

❗️ Openport 2.0 is NOT supported!

Suggested car list:
βœ… LADA VESTA 2015 +
βœ… Renault Logan 2012 +
βœ… Renault Duster 2012 +
βœ… Renault Dokker 2012 +
βœ… Renault Lodgy 2012 +
βœ… Renault Symbol 2012 +
βœ… Dacia Logan 2012 +
βœ… Dacia Duster 2012 +
βœ… Dacia Dokker 2012 +
βœ… Dacia Lodgy 2012 +
βœ… Dacia Symbol 2012 +

❗️ The license will be available after 4.12.2020

For price and information please refer to the links below:
⭐️ MD flasher
⭐️ PRE-ORDER License 47 - LADA/RENAULT/DACIA_KEY_BCM_CONTINENTAL_OBDII
❗️ Update: I/O TERMINAL MULTI TOOL V42 ❗️

Full Reading and Writing:
βœ… SIEMENS/ CONTINENTAL FORD EMS2101, EMS2102, EMS2103 (works with SIEMENS simcard).
βœ… GM SIEMENS/ CONTINENTAL SIMTECT 77 (works with SIEMENS simcard).
βœ… GM SIEMENS/ CONTINENTAL D42,D52,42R (works with SIEMENS simcard).
βœ… FIAT IAW 7GF (works with MARELLI ECU license).

➑️ Released new license for VOLVO P3 platform CEM modules (possible activate on VOLVO simcard)
β˜‘οΈ VOLVO DELPHI BCM M30882F+95320
M30882F DATA & PROGRAM FLASH R/W. EEPROM 95320 R/W.
β˜‘οΈ VOLVO DELPHI BCM (both versions of CEM hardware) R5F64524/R5F64525. R5F64524/R5F64525 DATA & PROGRAM FLASH R/W.
β˜‘οΈ Volvo CEM modules included in MULTITOOL software.

❗️ In order to R/W them, you need to know the PINCODE.

βœ… ECU wiring diagrams document has also been updated.

I/O Terminal
❗️ bFlash Update: V2011A - New OBD & Bench protocols ❗️

➑️ Reading : 3-5 minutes
➑️ Writing: 2 minutes

⭐️ NEW OBD PROTOCOLS

βœ… AUDI
Bosch MG1CS002IFX TC298
Bosch MG1CS008 TC298

βœ… BENTLEY
Bosch MG1CS008 TC298

βœ… BUICK
AcDelco E81 MPC5676
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

βœ… CHEVROLET
AcDelco E82 MPC5676
AcDelco E84 MPC5676
AcDelco E84 MPC5676
AcDelco E87 MPC5565
AcDelco E87 MPC5565
AcDelco T87 MPC5640 *

βœ… GMC
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

βœ… HOLDEN
AcDelco E82 MPC5676

βœ… LAMBORGHINI
Bosch MG1CS008 TC298

βœ… OPEL
AcDelco E84 MPC5676
AcDelco E87 MPC5565

βœ… PORSCHE
MG1CP007 TC298
MG1CS002IFX TC298
MG1CS008 TC298

⭐️ NEW BENCH PROTOCOLS

β˜‘οΈ BUICK
AcDelco E82 MPC5676

β˜‘οΈ CADILLAC
AcDelco E81 MPC5676
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

β˜‘οΈ CHEVROLET
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

β˜‘οΈ GMC
AcDelco E82 MPC5676
AcDelco T87 MPC5640 *

β˜‘οΈ HOLDEN
AcDelco E82 MPC5676

β˜‘οΈ OPEL
AcDelco E84 MPC5676
AcDelco E87 MPC5565

* TCU protocols

For prices and more information please refer to the links below:

bFlash Master
bFlash Slave
❗️ CombiLoader Update ❗️

The update of the integrated modules and of the software

βœ… AMT VAZ (J2534): the software list expansion
βœ… Bosch ME17 China: the error when writing some ECUs has been fixed
βœ… Bosch MEDC17 VAG K/CANTP2.0: identification option without owning the module has been added
βœ… Bosch MEDC17 VAG UDS: identification option without owning the module has been added
βœ… Delphi MT05: language changing option has been added
βœ… EMS3120 Renault: the state diagnostics has been improved
βœ… SIMOS12 VAG: SIMOS12.2 is now supported
βœ… SIMOS18 VAG: Checksum Corrections has been improved
βœ… Siemens SIM2K-25x Hyundai/Kia: the support of client files forming has been added
βœ… Siemens SIM2K-26x Hyundai/Kia: the support of client files forming has been added

For prices and more information please refer to the link below:
CombiLoader
❗️ New Nissan Rogue supported by K-TAG in Boot mode ❗️

βœ… Reading and Writing the ECU Hitachi NEC029 SH72533, petrol engine 2.5 16v CVT

➑️ Supported vehicle:
Nissan Rogue 2.5 16v CVT

For prices and more information please refer to the links below:

K-Tag Master
K-Tag Slave
❗️ FLEX version 5.7.0.0: New solutions in Bootloader for Continental ECUs ❗️

➑️ Continental Simos 10.xx ECUs in VAG vehicles in Boot mode, including:
Volkswagen Polo 6R
Audi A1 8x
Seat Ibiza 6J
Volkswagen Jetta 1B

➑️ New solutions are also available in Bootloader for programming the Continental SID605 ECUs equipped on Faw Jiefang brand vehicles.

For the new protocols, bug fixes and general improvements please refer to the link

FLEX Master
FLEX Slave