This channel already has a solid base (390 of you here), but I know it can be way more active and useful than it’s been.

Over the next 90 days I want to tighten the focus of Debug mastertee Tech and make this a place where network scanning, hidden subdomains, monitoring, and real tooling (like Phantom @Debug_15bot and sni-tester on Termux) are shared in a clearer, more consistent way.

I’m using inside.ad to keep the channel structured and measurable on Telegram, and I’ll come back in 3 months to share what changed.

📢 Made with Inside

Mini‑guide: OpenVPN .ovpn anatomy

1) server/port
remote vpn.example.com 1194
- Host/IP + port (you may see multiple remote lines for failover)

2) transport
proto udp (or tcp)
- UDP = faster/less overhead; TCP = more reliable on strict networks

3) tunnel device
dev tun (routed) / dev tap (bridged)

4) crypto (data channel)
cipher AES-256-GCM (legacy)
data-ciphers AES-256-GCM:AES-128-GCM (newer)

5) auth / integrity
auth SHA256 (legacy; with GCM it’s usually implicit)

6) TLS identity
ca, cert, key or embedded blocks:
<ca>…</ca>
<cert>…</cert>
<key>…</key>
Optional:
tls-auth ta.key 1 or tls-crypt (protects the control channel)

7) common extras
remote-cert-tls server (verify server cert)
verify-x509-name (pin server name)
auth-user-pass (username/password)
redirect-gateway def1 (route all traff

📢 Made with Inside

Deep dive: WireGuard .conf fields (what they do & when they matter)

[Interface] = your local tunnel settings.
- PrivateKey: your device’s secret key (never share).
- Address: tunnel IP(s) you’ll use (e.g., 10.66.66.2/32).
- ListenPort: only matters if this peer must accept inbound (server or behind port-forward).
- DNS: client convenience (sets resolver when up).

[Peer] = the remote side you talk to.
- PublicKey: remote peer’s identity.
- AllowedIPs (most important): routing + access list.
– Client: 0.0.0.0/0, ::/0 = full-tunnel VPN.
– Split-tunnel: only subnets you want (e.g., 10.0.0.0/8).
– Server: set to the client’s tunnel IP (/32) so replies route back.
- Endpoint: where to reach the peer (IP:port). Needed when the other side is not directly reachable by discovery.
- PersistentKeepalive: NAT traversal helper.
– Use (e.g., 25s) on the side behind NAT/firewall to keep mappings alive.
– Don’t use unless ne

📢 Made with Inside